Lockerstor Gen 3 64 GB ECC DDR5-4800 Ram

[Davekstl]

Can anyone clarify the specs for the RAM upgrade?
Can these modules work?
(2) 32 GB ECC DDR5 4800. Two 32GB 5600 MHz SO-DIMM unbuffered 262 pin DDR5 memory modules, 46 CAS latency Unbuffered, On-Die ECC?

[snapshot]

I suspect you're going to be the pioneer here and report back your findings. From the little I learned when looking into RAM for the Gen 3, that should be okay. There seems to be very little choice in DDR5 ECC SO-DIMMs and the specs for the Corsair and Kingston modules I found looked the same.

Do you have a usage reason to go for the full 64GB or is it just because you can?

[Davekstl]

It is because I can. This is all new to me and I enjoy technology. I WILL post all that I find. I received the AS6806T yesterday. The drives are coming tomorrow. I went with 4 WD Red Pro 10 TB. I am still researching the memory and will order it when I get home today.
I probably should switch this to the other Board.
Ask away if you have questions. It is not unboxed yet.

[Davekstl]

snapshot
where do you suggest I set up shop and kind of journal my experience? Which of the Boards?