Can't find out where to go

[PapaKilo]

I have Calibre running on a computer on my net with an open port.

I have a domain name pointing to my IP.

I installed Data Sync on my AS1104T and now my Calibre instance cannot be reached from the internet.

Apparently there is NO way to delete Data Sync once you install it.

Is there any way to point the internet request to Calibre to the correct internal IP address or am I going to have to do a hard reset on the AS1104T to start over again?

Sorry I don't know which forum to put this in.

[Nazar78]

Not sure what's the exact issue, post some screenshots.

[PapaKilo]

There are no screen shots.

When I installed Data Sync my internet access to Calibre stopped.

I can find no way to uninstall Data Sync or allow internet access to Calibre through the AS1104T.

[Nazar78]

DataSync Center and Calibre-Web (docker on port 38083) has no relationship with each other. Both can be uninstalled from the App Central. I just tested fresh install both no issues at all.

Check your port forwarding (either via UPnP EZ Router or manual entries in the router). You can use canyouseeme.org to test the port 3808 if it's opened to the net.

[PapaKilo]

Not using Calibre-Web.

I have Calibre running on a PC that has an open port.

When I installed Data Sync on the AS1104T I no longer could access Calibre through the open port.

Since there appears to be no way to uninstall Data Sync I guess I am going to do a full system reset on the AS1104T.

If thats even possible.

[Nazar78]

As said post some screenshots of detailed info. No idea what's the issue because those are two different apps and even one is running off the PC. As I recall datasync does not use any listening port so it shouldn't interfere with other apps that requires ports to be opened. Check your router for the forwarded port or UPnP, they can be easily removed or changed. Again datasync can be uninstalled from the app central.

[PapaKilo]

Thank you!

It seems I wasn't scrolling down far enough in App Central to find the Delete App stuff.

As soon as I deleted Data Sync I regained access to my Calibre site. Somehow Data Sync was grabbing the signal and not allowing it to go to my Calibre site.

Again thank you! Now my Calibre site is accessible to my friends and family.

I will look for a different way to sync my cloud accounts.

[PapaKilo]

When in doubt - Reboot!