Been using my Lockerstor 4 AS6604T for a while now, recently bought a 16TB HDD and couldn't figure out how to replace a failing drive so just copied of the data, made a new volume and re-installed.  All OK until I realised that I'd changed from JBOD to raid 6 and my drives are 16 8, 4 and 2TB so I've just under 6TB useable.  I'm intendinmg to have 4 16TB's when I have the funds but meantime, if I remove the 2TB will that double the useable space?
If so, can I remove the 2TB drive and still retain the data?
			
			
									
						
										
						Removing a drive
- 
				tmarsh12345
 - Posts: 15
 - youtube meble na wymiar Warszawa
 - Joined: Thu Jul 21, 2022 12:25 am
 
- 
				Nazar78
														 - Posts: 2235
 - Joined: Wed Jul 17, 2019 10:21 pm
 - Location: Singapore
 
Re: Removing a drive
Raid 6 requires 4 minimum disks and allowed to have two disks failures but the two disks space are unusable. In your case RAID 6 is only 4TB of usable space not 6TB or do you meant RAID 5? Removing any one (raid5) or two (raid6) of the disks will not increase any space in fact the array will be in a degraded state. Putting back the disk(s) the array will trigger a resync.
So I'm not sure what you're trying to achieve by removing the 2TB because unless you manually run commands to force degrade the array, which is officially unsupported, you'll not be able to use that particular bay slot for other purposes.
			
			
									
						
							So I'm not sure what you're trying to achieve by removing the 2TB because unless you manually run commands to force degrade the array, which is officially unsupported, you'll not be able to use that particular bay slot for other purposes.
AS5304T - 16GB DDR4 - ADM-OS modded on 2GB RAM
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
			
						Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
- 
				tmarsh12345
 - Posts: 15
 - Joined: Thu Jul 21, 2022 12:25 am
 
Re: Removing a drive
Thanks. I have raid 6, useable disk space is 5.4TB.Nazar78 wrote:Raid 6 requires 4 minimum disks and allowed to have two disks failures but the two disks space are unusable. In your case RAID 6 is only 4TB of usable space not 6TB or do you meant RAID 5?
I had read that raid 5 and 6 uses the smallest size disk size in calculating storage capacity. My setup's smallest disk is 2 TB and I thought if I made the smallest 4 that would double my storage but I see from your answer that I need 4 disks. Is that the 4 way it works? If I had 2 4TB disks along with the 16 and 8? As I said, this is tempoprary until I get the larger diosks, just using what I had lying around.Nazar78 wrote: So I'm not sure what you're trying to achieve by removing the 2TB because unless you manually run commands to force degrade the array, which is officially unsupported, you'll not be able to use that particular bay slot for other purposes.
- 
				Nazar78
														 - Posts: 2235
 - Joined: Wed Jul 17, 2019 10:21 pm
 - Location: Singapore
 
Re: Removing a drive
You cannot just remove one disk, you'll need to start fresh in RAID 5 of 4+8+16TB disks to get 8TB worth of space.
Your RAID 6 space seems not right, post some screenshots, you can verify here https://www.seagate.com/sg/en/products/ ... alculator/.
			
			
									
						
							Your RAID 6 space seems not right, post some screenshots, you can verify here https://www.seagate.com/sg/en/products/ ... alculator/.
AS5304T - 16GB DDR4 - ADM-OS modded on 2GB RAM
Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
			
						Internal:
- 4x10TB Toshiba RAID10 Ext4-Journal=Off
External 5 Bay USB3:
- 4x2TB Seagate modded RAID0 Btrfs-Compression
- 480GB Intel SSD for modded dm-cache (initramfs auto update patch) and Apps
When posting, consider checking the box "Notify me when a reply is posted" to get faster response
- 
				tmarsh12345
 - Posts: 15
 - Joined: Thu Jul 21, 2022 12:25 am
 
Re: Removing a drive
Sorry, my mistake, Windows included a 2TB external USB drive I had plugged in. Thanks for all your help, looks like I'll have to speculate!!Nazar78 wrote: Your RAID 6 space seems not right, post some screenshots, you can verify here https://www.seagate.com/sg/en/products/ ... alculator/.