Help! AS-302T does not recognize hard drives

[Langi1977]

seit heute zeigt mir das Control Center folgenden status an:

nicht initialisiert

auf der folgenden seite, soll ich die ersteinrichtung wiederholen. Der webbrowser fordert mich auf Festplatten einzulegen.

Allerdings sind beide Festplatten eingelegt!!!!

Rausziehe und wieder einsetzten bringt nichts.

Was kann ich machen?

Greatings Markus

[Langi1977]

Sorry, here my question in english:

since this indicates to me the Control Center the following status:

not initialized

on the following page, I should repeat the initial setup. The web browser asks me to insert disk.

However, both disks are inserted!!

Pull out and putting them does nothing.

What can I do?

[mynas1]

I had similar issue when initially setting as-304t
I only inserted only one HDD and started initialization and when it started added
remaining HDD's

Hope this helps

[Langi1977]

Thanks for the reply . However, I have expressed myself wrong . The nas was already initialized. And now, apparently not ! Thus, all data is lost now ?

[Langi1977]

because I still have a backup, I now wanted to re-initialize the NAS.

now I have to find that Nas no longer recognize my hard drives.

the Control Center says that I should insert a disk.

If I do that, it goes no further.

Can it be that the NAS has problems with Samsung hard drives? Ironically, the problems arose after a week in the operating

I think I have to send it back. Too bad.