AS-602T HDMI Output resolution and remote controller

[Allen@AST]

Hi Skyweb80,

Sorry for the delay. I have been trying to get some of the performance numbers from our engineers but they still have to test some of the models with the latest version of our firmware. I will post these as soon as I can get them. As for your first two questions:

1. The HDMI resolution for the AS-602T is 1080p

2. The AS-602T does not have an infrared receiver so the remote is not supported for the model. However, you can still use our AiRemote mobile app as a remote control.

Thanks,

Allen

[Allen@AST]

Hi Skyweb80,

Here are the results from a read/write performance test. Please note that the test was conducted using Samba and Robocopy.

2013-8-23 下午 03-19-27.png

Thanks,

Allen

[Skyweb80]

Hi Allen,

thanks a lot for the information. I will have my NAS in RAID 0 so I'm glad I have chosen the AS-602T, however the RAID 1 (and also the RAID 0 reading) performances are a bit disappointing considering that the series 6 has a faster processor...do you think is something that will be fixed with a future upgrade?

Marco.

[Allen@AST]

Hi Marco,

The numbers I posted for you are from a sample test with the new firmware. As we continue to fine tune it for the 6 series the speeds should improve. Don't worry, the 6 series is definitely faster than the 3 series.

Thanks,

Allen