UPS controls/status/shutdown
- 
				RainCaster
 - Posts: 25
 - youtube meble na wymiar Warszawa
 - Joined: Mon Feb 06, 2017 11:37 pm
 
UPS controls/status/shutdown
Can we get UPS support here? It would be great to have my UPS tell the ASUStor when to shutdown during a power outage. Even better if I could see the current state of the UPS in some status window.
			
			
									
						
										
						- 
				orion
														 - Posts: 3485
 - Joined: Wed May 29, 2013 11:09 am
 
Re: UPS controls/status/shutdown
Yes, if your UPS model is supported. https://www.asustor.com/en/service/ups?id=ups
			
			
									
						
										
						- 
				RainCaster
 - Posts: 25
 - Joined: Mon Feb 06, 2017 11:37 pm
 
Re: UPS controls/status/shutdown
I have a CyberPower OM1500LCDRM1U and it does not seem to be recognized. The system log fills up with connect/disconnect messages from the UPS.Too bad.
How would I know if it is being recognized correctly?
			
			
									
						
										
						How would I know if it is being recognized correctly?
- 
				orion
														 - Posts: 3485
 - Joined: Wed May 29, 2013 11:09 am
 
Re: UPS controls/status/shutdown
It looks like that your model is not in the supported list. I think you can send this request to asustor directly https://support.asustor.com/. However I believe it takes time to support it.
			
			
									
						
										
						- 
				RainCaster
 - Posts: 25
 - Joined: Mon Feb 06, 2017 11:37 pm
 
Re: UPS controls/status/shutdown
Request made. Thanks for the advice!
			
			
									
						
										
						- 
				RainCaster
 - Posts: 25
 - Joined: Mon Feb 06, 2017 11:37 pm
 
Re: UPS controls/status/shutdown
I took a look at the UPS config and nut was not configured correctly. I updated the upsmon.conf file and restarted the driver. Then it worked, and I got alerts when I unplugged the UPS. After a restart, the old config file was restored. How can I keep the updated file in place?
			
			
									
						
										
						- 
				orion
														 - Posts: 3485
 - Joined: Wed May 29, 2013 11:09 am
 
Re: UPS controls/status/shutdown
Oops, it's apparently a NAS internal protected file. I guess you can only raise the feature request to ask them to move this file outside, be a user configurable file.