It is currently Fri Nov 22, 2019 12:45 pm
All times are UTC + 8 hours

how to manually rebuild nas 5110

Share your awesome tips and tricks here.

how to manually rebuild nas 5110

Postby mbbcat » Mon Oct 22, 2018 7:05 am

HI,
My 5110 nas will not load its volume - support inspected by remote ssh & says that the system volume ( as opposed to the data volume is corrupt, by some magic with mdadm they managed to mount the data volume for ftp access ( only) however before the data volume could be backed up the power went down leaving a non usable nas again

Please can someone guide me through the steps to
check & fix all disks / partitions
check & fix the data volume & mount it to be accessible again
& if possible get some more services going - rsync / samba etc ?

Many thanks

M
mbbcat
 
Posts: 1
Joined: Wed Aug 26, 2015 10:29 pm

Re: how to manually rebuild nas 5110

Postby muad_dib77 » Thu Feb 07, 2019 9:04 pm

Apologies for late reply - you've likely either solved or given up at this stage.

Same thing happened to me - around the same time as you as well... AND I have a 5110 ... (apart from the power related issue)..
I didn't think to try ftp through ssh. Instead I transferred the drives to a desktop where I'm using a 3rd party tool to recover the data I didn't have copies of elsewhere.

There's a few tools available that will do the job.

EDIT: Just found this:
https://support.asustor.com/index.php?/ ... using-a-pc

I haven't tested to see if the information is still valid..
muad_dib77
 
Posts: 3
Joined: Sat Dec 10, 2016 4:25 am

Return to Tips & Tricks

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 0 guests