AS1002T v2 must boot to recognized USB2 drive?

Looking for discussion about hardware compatibility? Look no further.

Moderator: Lillian.W@AST

Post Reply
jsmiddleton4
Posts: 2
youtube meble na wymiar Warszawa
Joined: Fri Apr 12, 2019 6:49 am

AS1002T v2 must boot to recognized USB2 drive?

Post by jsmiddleton4 »

I have to boot the NAS to get it to recognize the attached USB drive on the back port, USB2. Works fine after doing so, drive recognized, etc., can map it, it works. Why do I have to boot?
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: AS1002T v2 must boot to recognized USB2 drive?

Post by orion »

Mine (different model) is just working fine. Did you see event messages under ADM web -> System Information -> Log, when plug and un-plug?
jsmiddleton4
Posts: 2
Joined: Fri Apr 12, 2019 6:49 am

Re: AS1002T v2 must boot to recognized USB2 drive?

Post by jsmiddleton4 »

No. But when it boots finds it no problem.
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: AS1002T v2 must boot to recognized USB2 drive?

Post by orion »

Then, you'd better to report it to asustor directly. https://support.asustor.com/
Post Reply

Return to “Hardware Compatibility”