AS6104T MyArchive random unmount

Moderator: Lillian.W@AST

User avatar
iobi
Posts: 19
youtube meble na wymiar Warszawa
Joined: Mon Feb 13, 2017 6:00 pm

Re: AS6104T MyArchive random unmount

Post by iobi »

Hello,
I have embarrassing / annoying news.

I only migrated MyArchive from EXT4 to NTFS.

Now I have:
Disk1 - System (EXT)
Disk2 - MyArchive 3 (NTFS)
Disk3 - MyArchive 2 (NTFS)
Disk4 - MyArchive 1 (NTFS)

Where is the news: now on reboot are two volumes that are not mounted: MyArchive 3 and MyArchive 1 (I attach a photo).
I ran a dmesg:

Code: Select all

[    7.558972] 8021q: 802.1Q VLAN Support v1.8
[    7.563209] Key type dns_resolver registered
[    7.567971] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x351
[    7.573952] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x351
[    7.579964] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.588795] SSE version of gcm_enc/dec engaged.
[    7.591605] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    7.601159] registered taskstats version 1
[    7.606386] Btrfs loaded, debug=on
[    7.610697]   Magic number: 7:163:177
[    7.614563] acpi device:0d: hash matches
[    7.618590] console [netcon0] enabled
[    7.622269] netconsole: network logging started
[    7.626873] rtc_cmos 00:04: setting system clock to 2019-02-04 12:10:40 UTC (1549282240)
[    7.635779] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    7.641799] EDD information not available.
[    7.646038] PM: Hibernation image not present or could not be loaded.
[    7.649156] Freeing unused kernel memory: 888K (ffffffff81ca6000 - ffffffff81d84000)
[    7.657203] Write protecting the kernel read-only data: 12288k
[    7.664671] Freeing unused kernel memory: 1516K (ffff880001685000 - ffff880001800000)
[    7.682270] Freeing unused kernel memory: 932K (ffff880001b17000 - ffff880001c00000)
[    7.726300] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[    7.733640] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    7.741450] usb 1-1: Product: CSR8510 A10
[    7.901626] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[    8.085318] usb 1-2: New USB device found, idVendor=051d, idProduct=0002
[    8.092351] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    8.099772] usb 1-2: Product: Back-UPS XS 950U   FW:925.T2 .I USB FW:T2
[    8.106747] usb 1-2: Manufacturer: American Power Conversion
[    8.112623] usb 1-2: SerialNumber: 4B1827P00736
[    8.118123] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    8.450158] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 950U   FW:925.T2 .I USB FW:T2 ] on usb-0000:00:14.0-2/input0
[    8.621618] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[    8.794143] usb 1-3: New USB device found, idVendor=125f, idProduct=601a
[    8.801100] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.808513] usb 1-3: Product: IUM01-512MFHL
[    8.812845] usb 1-3: Manufacturer: ADATA
[    8.816891] usb 1-3: SerialNumber: 120825741539000430
[    8.822377] usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    8.831607] usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    8.843731] usb-storage 1-3:1.0: USB Mass Storage device detected
[    8.865024] scsi host6: usb-storage 1-3:1.0
[    9.022658] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[    9.216844] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[    9.224213] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    9.232017] usb 1-4: Product: USB 2.0 Hub [MTT]
[    9.237556] hub 1-4:1.0: USB hub found
[    9.241686] hub 1-4:1.0: 4 ports detected
[    9.873469] scsi 6:0:0:0: Direct-Access     ADATA    IUM01-512MFHL    0100 PQ: 0 ANSI: 0 CCS
[    9.883422] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    9.889802] sd 6:0:0:0: [sde] 1007616 512-byte logical blocks: (516 MB/492 MiB)
[    9.899678] sd 6:0:0:0: [sde] Write Protect is off
[    9.904711] sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
[    9.909301] sd 6:0:0:0: [sde] No Caching mode page found
[    9.914876] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    9.947696]  sde: sde1 sde2 sde3
[   10.255067] sd 6:0:0:0: [sde] Attached SCSI removable disk
[   10.415493] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[   10.436377] nasmand (771): /proc/888/oom_adj is deprecated, please use /proc/888/oom_score_adj instead.
[   10.567535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.663214] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.758721] random: dd: uninitialized urandom read (512 bytes read, 115 bits of entropy available)
[   10.826919] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[   10.889507] random: nonblocking pool is initialized
[   11.386687] md: md0 stopped.
[   11.392854] md: bind<sda2>
[   11.403244] md/raid1:md0: active with 1 out of 4 mirrors
[   11.408813] asustor add disk dev md0
[   11.408867] md0: detected capacity change from 0 to 2145386496
[   11.534290] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   11.581774] EXT4-fs (md0): re-mounted. Opts: (null)
[   11.792274] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[   11.819606] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[   14.269328] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   14.276565] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[   14.284077] tg3 0000:03:00.0 eth0: EEE is enabled
[   14.289130] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.675534] md: md126 stopped.
[   19.701610] md: bind<sda3>
[   19.720379] md/raid1:md126: active with 1 out of 4 mirrors
[   19.726406] asustor add disk dev md126
[   19.726460] md126: detected capacity change from 0 to 2145386496
[   19.799405] Adding 2095100k swap on /dev/md126.  Priority:-1 extents:1 across:2095100k
[   19.829416] md: md1 stopped.
[   19.840000] md: bind<sda4>
[   19.874842] md/raid1:md1: active with 1 out of 1 mirrors
[   19.880679] asustor add disk dev md1
[   19.880756] md1: detected capacity change from 0 to 995506520064
[   20.166452] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1
[   21.169648] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   27.494081] jnl: driver (UFSD_HEAD lke_9.5.7_b449) loaded at ffffffffa002f000
[   27.504705] ufsd: module license 'Commercial product' taints kernel.
[   27.511911] Disabling lock debugging due to kernel taint
[   27.521778] ufsd: driver (UFSD_HEAD lke_9.5.7_b449, acl, ioctl, sd2(5), tr, car) loaded at ffffffffa003e000
[   27.521778] NTFSJ support included
[   27.521778] Hfs+J support included
[   27.521778] Build_for__Asustor_AS-6xx_k4.1.0_2016-02-01_lke_9.5.7_b449
[   27.546249] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k
[   27.553657] ufsd: Kernel .config hash: original 0x9d41e7bd, current matched.
[   28.077287] ufsd: "mount" (sdc1): is mounted as NTFS at 2019-02-04 12:11:00
[   28.772229] ufsd: "mount" (sdd1): is mounted as NTFS at 2019-02-04 12:11:01
[   28.958483] ufsd: "mount" (sdb1): is mounted as NTFS at 2019-02-04 12:11:01
[   42.805422] ip_tables: (C) 2000-2006 Netfilter Core Team
[   58.758526] sys_stat: module is from the staging directory, the quality is unknown, you have been warned.
[   58.947829] [drm] Initialized drm 1.1.0 20060810
[   59.109185] [drm] Memory usable by graphics device = 2048M
[   59.115225] [drm] Replacing VGA console driver
[   59.120357] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   59.127918] [drm] Driver supports precise vblank timestamp query.
[   59.176442] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   59.323384] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   59.472409] acpi device:2b: registered as cooling_device3
[   59.534427] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   59.638533] i915 0000:00:02.0: No connectors reported connected with modes
[   59.645753] [drm] Cannot find any crtc or sizes - going 1024x768
[   59.658188] fbcon: inteldrmfb (fb0) is primary device
[   59.658391] Console: switching to colour frame buffer device 128x48
[   59.711450] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   59.734148] intelfb: intelfb_init
[   59.734153] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[   59.746226] intelfb: Version 0.9.6
[   60.034542] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   60.071095] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   60.082953] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   60.091621] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   60.099887] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   60.106864] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   60.113645] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   60.119531] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   60.126147] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   60.132915] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   60.139184] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[   60.256273] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   60.313749] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   60.385053] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   60.462103] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   60.557493] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   60.589565] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   60.632154] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   60.686005] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   60.746090] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   60.804099] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   62.945691] iscsi-scst: ***WARNING***: CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETION_NOTIFICATION not enabled in your kernel. ISCSI-SCST will be working with not the best performance. Refer README file for details.
[   63.271302] Loading iSCSI transport class v2.0-870.
[   63.413552] iscsi: registered transport (tcp)
[   68.983826] usbip_core: USB/IP Core v1.0.0
[   69.005149] usbip-host 1-1:1.0: 1-1 is not in match_busid table... skip!
[   69.012161] usbip-host 1-1:1.1: 1-1 is not in match_busid table... skip!
[   69.019248] usbcore: registered new interface driver usbip-host
[   69.025448] usbip_host: USB/IP Host Driver v1.0.0
[   72.698759] cryptodev: driver 1.8 loaded.
[   75.984594] Bluetooth: Core ver 2.21
[   75.988364] NET: Registered protocol family 31
[   75.993037] Bluetooth: HCI device and connection manager initialized
[   75.999649] Bluetooth: HCI socket layer initialized
[   76.004809] Bluetooth: L2CAP socket layer initialized
[   76.010041] Bluetooth: SCO socket layer initialized
[   76.086566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   76.092482] Bluetooth: BNEP filters: protocol multicast
[   76.098192] Bluetooth: BNEP socket layer initialized
[   76.124423] Bluetooth: RFCOMM TTY layer initialized
[   76.129806] Bluetooth: RFCOMM socket layer initialized
[   76.135433] Bluetooth: RFCOMM ver 1.11
[   76.151996] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   76.158548] Bluetooth: HIDP socket layer initialized
[   76.329891] Bluetooth: HCI UART driver ver 2.3
[   76.334910] Bluetooth: HCI UART protocol H4 registered
[   76.340565] Bluetooth: HCI UART protocol BCSP registered
[   76.346391] Bluetooth: HCI UART protocol LL registered
[   76.352001] Bluetooth: HCI UART protocol ATH3K registered
[   76.357922] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   76.364849] Bluetooth: HCI UART protocol Intel registered
[   76.370788] Bluetooth: HCI UART protocol BCM registered
[   76.376490] Bluetooth: HCI UART protocol QCA registered
[   76.447135] usbcore: registered new interface driver btusb
[   77.029805] Bluetooth: Unable to create CMAC crypto context
[   93.646490] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   93.955025] usbcore: registered new interface driver snd-usb-audio
>[  183.492554] udevd[6063]: starting version 3.2
>[  183.520561] udevd[6064]: starting eudev-3.2
root@NAS-SERVER:/volume1/.@root #
Always with the E-Sata disk (NTFS) connected.

I saw a new firmware update available; Is it wise to update? What do you think?
Also I want to do other tests like disconnect the E-Sata disk and try the disk via USB 3.0 box to understand if the problem can be the disk or the box.
And then I have a factory reset (no, I have not tried with the original ram).
Attachments
smontaggio doppio.PNG
smontaggio doppio.PNG (58.27 KiB) Viewed 6886 times
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: AS6104T MyArchive random unmount

Post by orion »

Ok, the new "dmesg" still shows no errors in Linux kernel. The 3 archive drives are mounted correctly.

Code: Select all

[   28.077287] ufsd: "mount" (sdc1): is mounted as NTFS at 2019-02-04 12:11:00
[   28.772229] ufsd: "mount" (sdd1): is mounted as NTFS at 2019-02-04 12:11:01
[   28.958483] ufsd: "mount" (sdb1): is mounted as NTFS at 2019-02-04 12:11:01
You still got the same result / fault as the previous tests. It only proves that it happened again. Anyway, the dismounting must be caused by software actions (or RAM).
Your log does not start from the beginning, so I cannot make sure how many devices you connected. I did not see e-SATA device in the log.

It's a good idea to upgrade to the newest software. However, I guess the result is still the same (because I don't see the fixes about this issue).
User avatar
iobi
Posts: 19
Joined: Mon Feb 13, 2017 6:00 pm

Re: AS6104T MyArchive random unmount

Post by iobi »

Dear Orion I must sincerely thank you for following my problem.
Your log does not start from the beginning
I admit my ignorance, I do not know well putty and I could not completely read the results of the dmesg.
The software showed only part of the dmesg result.
A friend helped me solve.
I did a dmesg.log and now I have the whole list since the start of the nas.

Paste here.

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.24 (root@sw1-server) (gcc version 4.6.4 (crosstool-NG crosstool-ng-1.22.0 - x86_64 64-bit toolchain - ASUSTOR Inc.) ) #1 SMP Mon Jan 28 00:39:33 CST 2019
[    0.000000] Command line: BOOT_IMAGE=(hd0,gpt3)/bzImage console=ttyS0,115200n8 bootpart=3 uuid=35cfd085-e092-4a21-81ec-b8bb02ad17c2
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x000000000008ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078e38fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078e39000-0x0000000079838fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079839000-0x000000007b238fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b239000-0x000000007b278fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007b279000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7b278014  SMBIOS=0x791c8000  ESRT=0x791cca18 
[    0.000000] esrt: Reserving ESRT space from 0x00000000791cca18 to 0x00000000791cca50.
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Insyde AS61xx/Type2 - Board Product Name, BIOS V1.35 11/02/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07E000000 mask FFE000000 uncachable
[    0.000000]   3 base 07D000000 mask FFF000000 uncachable
[    0.000000]   4 base 07C800000 mask FFF800000 uncachable
[    0.000000]   5 base 07C400000 mask FFFC00000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask F80000000 write-back
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000013000] 13000 size 24576
[    0.000000] BRK [0x01e6d000, 0x01e6dfff] PGTABLE
[    0.000000] BRK [0x01e6e000, 0x01e6efff] PGTABLE
[    0.000000] BRK [0x01e6f000, 0x01e6ffff] PGTABLE
[    0.000000] BRK [0x01e70000, 0x01e70fff] PGTABLE
[    0.000000] BRK [0x01e71000, 0x01e71fff] PGTABLE
[    0.000000] BRK [0x01e72000, 0x01e72fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3650c000-0x3727dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007B278014 000024 (v02 INSYDE)
[    0.000000] ACPI: XSDT 0x000000007B278120 00008C (v01 INSYDE INSYDE   00000003      01000013)
[    0.000000] ACPI: FACP 0x000000007B274000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007B264000 00C6A4 (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007B235000 000040
[    0.000000] ACPI: UEFI 0x000000007B277000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000007B275000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007B273000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007B272000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000007B271000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B263000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B262000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B261000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007B260000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B25F000 000DF9 (v01 INSYDE SIOACPI  00001000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000007B25E000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000007B25D000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27fff6000-0x27fff9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.000000]   node   0: [mem 0x0000000000070000-0x000000000008ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000078e38fff]
[    0.000000]   node   0: [mem 0x000000007b279000-0x000000007bffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.000000] On node 0 totalpages: 2071374
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1160 pages reserved
[    0.000000]   DMA zone: 3982 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7727 pages used for memmap
[    0.000000]   DMA32 zone: 494528 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78e39000-0x79838fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79839000-0x7b238fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b239000-0x7b278fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7cbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7cc00000-0x7ebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ec00000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0x7ec00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88027fc00000 s88216 r8192 d30568 u524288
[    0.000000] pcpu-alloc: s88216 r8192 d30568 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2037847
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd0,gpt3)/bzImage console=ttyS0,115200n8 bootpart=3 uuid=35cfd085-e092-4a21-81ec-b8bb02ad17c2
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 8026544K/8285496K available (6667K kernel code, 658K rwdata, 3164K rodata, 888K init, 904K bss, 258952K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1599.931 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.86 BogoMIPS (lpj=1599931)
[    0.010688] pid_max: default: 32768 minimum: 301
[    0.015337] ACPI: Core revision 20150930
[    0.042782] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.052112] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.064084] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.073264] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.080211] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.088074] Initializing cgroup subsys io
[    0.092136] Initializing cgroup subsys memory
[    0.096531] Initializing cgroup subsys devices
[    0.101004] Initializing cgroup subsys freezer
[    0.105474] Initializing cgroup subsys net_cls
[    0.109946] Initializing cgroup subsys perf_event
[    0.114678] Initializing cgroup subsys net_prio
[    0.119244] Initializing cgroup subsys hugetlb
[    0.123718] Initializing cgroup subsys pids
[    0.127960] CPU: Physical Processor ID: 0
[    0.131991] CPU: Processor Core ID: 0
[    0.135680] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.141706] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.154210] mce: CPU supports 6 MCE banks
[    0.158255] CPU0: Thermal monitoring enabled (TM1)
[    0.163073] process: using mwait in idle threads
[    0.167710] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.173132] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.179899] Freeing SMP alternatives memory: 20K (ffffffff81d84000 - ffffffff81d89000)
[    0.195378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.211420] TSC deadline timer enabled
[    0.211426] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3050  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.221557] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.231992] ... version:                3
[    0.236013] ... bit width:              40
[    0.240121] ... generic registers:      2
[    0.244141] ... value mask:             000000ffffffffff
[    0.249463] ... max period:             000000ffffffffff
[    0.254784] ... fixed-purpose events:   3
[    0.258804] ... event mask:             0000000700000003
[    0.264908] x86: Booting SMP configuration:
[    0.269113] .... node  #0, CPUs:      #1
[    0.280594] x86: Booted up 1 node, 2 CPUs
[    0.284828] smpboot: Total of 2 processors activated (6399.72 BogoMIPS)
[    0.292317] devtmpfs: initialized
[    0.306370] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[    0.314129] PM: Registering ACPI NVS region [mem 0x79839000-0x7b238fff] (27262976 bytes)
[    0.323395] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.333316] xor: measuring software checksum speed
[    0.348153]    prefetch64-sse:  5488.000 MB/sec
[    0.362725]    generic_sse:  4948.000 MB/sec
[    0.367005] xor: using function: prefetch64-sse (5488.000 MB/sec)
[    0.373378] RTC time: 12:10:45, date: 02/14/19
[    0.378300] NET: Registered protocol family 16
[    0.386789] cpuidle: using governor ladder
[    0.394927] cpuidle: using governor menu
[    0.399079] ACPI: bus type PCI registered
[    0.403235] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.412548] PCI: not using MMCONFIG
[    0.416051] PCI: Using configuration type 1 for base access
[    0.445747] raid6: sse2x1   gen()   609 MB/s
[    0.467093] raid6: sse2x1   xor()  1787 MB/s
[    0.488471] raid6: sse2x2   gen()  1082 MB/s
[    0.509807] raid6: sse2x2   xor()  1998 MB/s
[    0.531170] raid6: sse2x4   gen()  1566 MB/s
[    0.552507] raid6: sse2x4   xor()  1730 MB/s
[    0.556786] raid6: using algorithm sse2x4 gen() 1566 MB/s
[    0.562195] raid6: .... xor() 1730 MB/s, rmw enabled
[    0.567169] raid6: using ssse3x2 recovery algorithm
[    0.572167] ACPI: Added _OSI(Module Device)
[    0.576373] ACPI: Added _OSI(Processor Device)
[    0.580832] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.585545] ACPI: Added _OSI(Processor Aggregator Device)
[    0.608116] ACPI: Dynamic OEM Table Load:
[    0.612218] ACPI: SSDT 0xFFFF880275C20000 000634 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.622586] ACPI: Dynamic OEM Table Load:
[    0.626678] ACPI: SSDT 0xFFFF880275C18400 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.637517] ACPI: Interpreter enabled
[    0.641240] ACPI: (supports S0 S3 S4 S5)
[    0.645179] ACPI: Using IOAPIC for interrupt routing
[    0.650236] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.662071] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.670800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.686180] ACPI: Power Resource [USBC] (on)
[    0.698908] ACPI: Power Resource [CLK0] (on)
[    0.703783] ACPI: Power Resource [CLK0] (on)
[    0.708178] ACPI: Power Resource [CLK1] (on)
[    0.718574] ACPI: Power Resource [ID3C] (off)
[    0.728957] ACPI: Power Resource [FN00] (off)
[    0.734532] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.740734] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.749047] \_SB_.PCI0:_OSC invalid UUID
[    0.749051] _OSC request data:1 1f 0 
[    0.749061] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.755367] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.766151] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff window]; [mem 0x80000000-0xdfffffff window] ignored
[    0.778682] PCI host bridge to bus 0000:00
[    0.782795] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.788989] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.795799] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.802598] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.809399] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.816889] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.824387] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.831882] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.839373] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.844886] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.845235] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.845274] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.845291] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.845304] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.845568] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.845649] pci 0000:00:13.0: reg 0x20: [io  0x3060-0x307f]
[    0.845664] pci 0000:00:13.0: reg 0x24: [mem 0x91614000-0x916147ff]
[    0.845721] pci 0000:00:13.0: PME# supported from D3hot
[    0.845943] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.845992] pci 0000:00:14.0: reg 0x10: [mem 0x91600000-0x9160ffff 64bit]
[    0.846084] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.846229] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.852015] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.852056] pci 0000:00:1a.0: reg 0x10: [mem 0x91500000-0x915fffff]
[    0.852070] pci 0000:00:1a.0: reg 0x14: [mem 0x91400000-0x914fffff]
[    0.852157] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.852441] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.852494] pci 0000:00:1b.0: reg 0x10: [mem 0x91610000-0x91613fff 64bit]
[    0.852595] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.852720] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.858495] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.858610] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.858730] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.864500] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.864615] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.864738] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.870517] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.870632] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.870751] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.876522] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[    0.876636] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.876756] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.882535] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.882868] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.882950] pci 0000:00:1f.3: reg 0x10: [mem 0x91615000-0x9161501f]
[    0.883069] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.883484] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    0.883532] pci 0000:01:00.0: reg 0x10: [io  0x2028-0x202f]
[    0.883551] pci 0000:01:00.0: reg 0x14: [io  0x2034-0x2037]
[    0.883569] pci 0000:01:00.0: reg 0x18: [io  0x2020-0x2027]
[    0.883587] pci 0000:01:00.0: reg 0x1c: [io  0x2030-0x2033]
[    0.883605] pci 0000:01:00.0: reg 0x20: [io  0x2000-0x201f]
[    0.883624] pci 0000:01:00.0: reg 0x24: [mem 0x91300000-0x913001ff]
[    0.883642] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.883765] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.891487] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.896473] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.896482] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.896600] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.896649] pci 0000:02:00.0: reg 0x10: [io  0x1028-0x102f]
[    0.896667] pci 0000:02:00.0: reg 0x14: [io  0x1034-0x1037]
[    0.896685] pci 0000:02:00.0: reg 0x18: [io  0x1020-0x1027]
[    0.896703] pci 0000:02:00.0: reg 0x1c: [io  0x1030-0x1033]
[    0.896721] pci 0000:02:00.0: reg 0x20: [io  0x1000-0x101f]
[    0.896739] pci 0000:02:00.0: reg 0x24: [mem 0x91200000-0x912001ff]
[    0.896758] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.896882] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.904584] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.909570] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.909579] pci 0000:00:1c.1:   bridge window [mem 0x91200000-0x912fffff]
[    0.909709] pci 0000:03:00.0: [14e4:16b1] type 00 class 0x020000
[    0.909791] pci 0000:03:00.0: reg 0x10: [mem 0x91110000-0x9111ffff 64bit pref]
[    0.909825] pci 0000:03:00.0: reg 0x18: [mem 0x91100000-0x9110ffff 64bit pref]
[    0.909886] pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.910009] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.910096] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.917811] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.922806] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff 64bit pref]
[    0.922927] pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000
[    0.923009] pci 0000:04:00.0: reg 0x10: [mem 0x91010000-0x9101ffff 64bit pref]
[    0.923043] pci 0000:04:00.0: reg 0x18: [mem 0x91000000-0x9100ffff 64bit pref]
[    0.923105] pci 0000:04:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.923228] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.923320] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.931032] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.936023] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    0.938935] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.946466] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.953804] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.961137] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.968488] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.975824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.983164] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.990692] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.999855] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.004936] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.010609] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.018716] vgaarb: loaded
[    1.021439] vgaarb: bridge control possible 0000:00:02.0
[    1.026936] SCSI subsystem initialized
[    1.030814] libata version 3.00 loaded.
[    1.030881] ACPI: bus type USB registered
[    1.034964] usbcore: registered new interface driver usbfs
[    1.040494] usbcore: registered new interface driver hub
[    1.045844] usbcore: registered new device driver usb
[    1.050959] pps_core: LinuxPPS API ver. 1 registered
[    1.055943] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.065095] PTP clock support registered
[    1.069263] PCI: Using ACPI for IRQ routing
[    1.076058] PCI: pci_cache_line_size set to 64 bytes
[    1.076155] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    1.076159] e820: reserve RAM buffer [mem 0x78e39000-0x7bffffff]
[    1.076616] clocksource: Switched to clocksource refined-jiffies
[    1.082976] pnp: PnP ACPI init
[    1.086419] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.092363] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.098305] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.104243] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.104937] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.107691] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.107912] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.114895] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.121527] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.128157] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.134788] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.141426] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.148057] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
[    1.154688] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.161319] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.167948] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.168342] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.168694] pnp: PnP ACPI: found 5 devices
[    1.182675] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.191596] clocksource: Switched to clocksource acpi_pm
[    1.196959] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.206913] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.216862] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    1.226801] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    1.236804] pci 0000:00:1c.2: BAR 14: assigned [mem 0x91700000-0x917fffff]
[    1.243714] pci 0000:00:1c.3: BAR 14: assigned [mem 0x91800000-0x918fffff]
[    1.250630] pci 0000:01:00.0: BAR 6: assigned [mem 0x91310000-0x9131ffff pref]
[    1.257890] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.262893] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.269022] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x913fffff]
[    1.275860] pci 0000:02:00.0: BAR 6: assigned [mem 0x91210000-0x9121ffff pref]
[    1.283119] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.288104] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.294234] pci 0000:00:1c.1:   bridge window [mem 0x91200000-0x912fffff]
[    1.301063] pci 0000:03:00.0: BAR 6: assigned [mem 0x91700000-0x917007ff pref]
[    1.308307] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.313310] pci 0000:00:1c.2:   bridge window [mem 0x91700000-0x917fffff]
[    1.320138] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff 64bit pref]
[    1.327917] pci 0000:04:00.0: BAR 6: assigned [mem 0x91800000-0x918007ff pref]
[    1.335170] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.340178] pci 0000:00:1c.3:   bridge window [mem 0x91800000-0x918fffff]
[    1.347007] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    1.354776] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.354781] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.354787] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.354792] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.354797] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.354802] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.354807] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.354812] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.354817] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.354822] pci_bus 0000:01: resource 1 [mem 0x91300000-0x913fffff]
[    1.354827] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    1.354832] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    1.354837] pci_bus 0000:03: resource 1 [mem 0x91700000-0x917fffff]
[    1.354842] pci_bus 0000:03: resource 2 [mem 0x91100000-0x911fffff 64bit pref]
[    1.354848] pci_bus 0000:04: resource 1 [mem 0x91800000-0x918fffff]
[    1.354853] pci_bus 0000:04: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[    1.354920] NET: Registered protocol family 2
[    1.359771] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.367396] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.374540] TCP: Hash tables configured (established 65536 bind 65536)
[    1.381260] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.387493] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.394271] NET: Registered protocol family 1
[    1.398716] pci 0000:00:02.0: Video device with shadowed ROM
[    1.400939] PCI: CLS 64 bytes, default 64
[    1.401124] Trying to unpack rootfs image as initramfs...
[    4.536534] Freeing initrd memory: 13768K (ffff88003650c000 - ffff88003727e000)
[    4.543924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.550407] software IO TLB [mem 0x733f1000-0x773f1000] (64MB) mapped at [ffff8800733f1000-ffff8800773f0fff]
[    4.560602] Scanning for low memory corruption every 60 seconds
[    4.567560] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    4.573864] audit: initializing netlink subsys (disabled)
[    4.579330] audit: type=2000 audit(1550146247.942:1): initialized
[    4.586188] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.597358] VFS: Disk quotas dquot_6.6.0
[    4.601426] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.609403] fuse init (API version 7.23)
[    4.616614] NET: Registered protocol family 38
[    4.621222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    4.628748] io scheduler noop registered
[    4.632763] io scheduler deadline registered
[    4.637158] io scheduler cfq registered (default)
[    4.643049] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.648663] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.655582] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    4.663961] ACPI: Power Button [PWRB]
[    4.667786] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    4.676163] ACPI: Sleep Button [SLPB]
[    4.679985] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.687422] ACPI: Power Button [PWRF]
[    4.695828] thermal LNXTHERM:00: registered as thermal_zone0
[    4.701525] ACPI: Thermal Zone [TZ01] (27 C)
[    4.706034] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.733762] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.762871] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    4.775398] Linux agpgart interface v0.103
[    4.787185] brd: module loaded
[    4.793733] loop: module loaded
[    4.797255] ahci 0000:00:13.0: version 3.0
[    4.797631] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.805808] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
[    4.815283] scsi host0: ahci
[    4.818512] scsi host1: ahci
[    4.821559] ata1: SATA max UDMA/133 abar m2048@0x91614000 port 0x91614100 irq 115
[    4.829079] ata2: SATA max UDMA/133 abar m2048@0x91614000 port 0x91614180 irq 115
[    4.836917] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    4.843599] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.851721] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    4.860983] scsi host2: ahci
[    4.864204] scsi host3: ahci
[    4.867255] ata3: SATA max UDMA/133 abar m512@0x91300000 port 0x91300100 irq 116
[    4.874696] ata4: SATA max UDMA/133 abar m512@0x91300000 port 0x91300180 irq 116
[    4.882371] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[    4.889069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.897194] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    4.906400] scsi host4: ahci
[    4.909608] scsi host5: ahci
[    4.912693] ata5: SATA max UDMA/133 abar m512@0x91200000 port 0x91200100 irq 117
[    4.920129] ata6: SATA max UDMA/133 abar m512@0x91200000 port 0x91200180 irq 117
[    4.927907] tg3.c:v3.137 (May 11, 2014)
[    5.141743] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.148048] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.154511] ata2.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[    5.161264] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.168683] ata1.00: ATA-9: WDC WD10EFRX-68FYTN0, 82.00A82, max UDMA/133
[    5.175435] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.182856] ata2.00: configured for UDMA/133
[    5.187396] ata1.00: configured for UDMA/133
[    5.192082] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68F 0A82 PQ: 0 ANSI: 5
[    5.200810] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.206364] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.214077] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.219738] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[    5.228068] sd 0:0:0:0: [sda] Write Protect is off
[    5.232895] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.232986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.242261] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.242323] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    5.242327] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    5.242522] sd 1:0:0:0: [sdb] Write Protect is off
[    5.242527] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.242615] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.301570]  sdb: sdb1
[    5.306192]  sda: sda1 sda2 sda3 sda4
[    5.405307] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.409975] asustor add disk dev sdb 
[    5.415733] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.422844] ata5.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    5.429058] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.445100] ata5.00: configured for UDMA/133
[    5.568689] tsc: Refined TSC clocksource calibration: 1599.948 MHz
[    5.574894] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff3c37d3, max_idle_ns: 440795211487 ns
[    5.714298] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.718984] asustor add disk dev sda 
[    6.125508] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 10:bf:48:8b:33:37
[    6.136137] tg3 0000:03:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    6.145993] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    6.153853] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    6.584848] clocksource: Switched to clocksource tsc
[    7.107086] tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 10:bf:48:8b:33:9b
[    7.117705] tg3 0000:04:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    7.127541] tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    7.135382] tg3 0000:04:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[    7.142254] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.149318] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.155123] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.160965] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.166998] usbcore: registered new interface driver catc
[    7.172544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.179087] ehci-pci: EHCI PCI platform driver
[    7.183569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.189769] ohci-pci: OHCI PCI platform driver
[    7.194259] uhci_hcd: USB Universal Host Controller Interface driver
[    7.200943] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.206282] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    7.214868] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    7.223331] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    7.223562] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.230372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.237612] usb usb1: Product: xHCI Host Controller
[    7.242506] usb usb1: Manufacturer: Linux 4.4.24 xhci-hcd
[    7.247923] usb usb1: SerialNumber: 0000:00:14.0
[    7.252879] hub 1-0:1.0: USB hub found
[    7.256700] hub 1-0:1.0: 7 ports detected
[    7.262325] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.267671] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    7.275205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    7.282007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.289241] usb usb2: Product: xHCI Host Controller
[    7.294135] usb usb2: Manufacturer: Linux 4.4.24 xhci-hcd
[    7.299544] usb usb2: SerialNumber: 0000:00:14.0
[    7.304467] hub 2-0:1.0: USB hub found
[    7.308275] hub 2-0:1.0: 6 ports detected
[    7.313887] usbcore: registered new interface driver cdc_acm
[    7.319570] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    7.327615] usbcore: registered new interface driver usblp
[    7.333164] usbcore: registered new interface driver usb-storage
[    7.339253] usbcore: registered new interface driver usbserial
[    7.345137] usbcore: registered new interface driver ftdi_sio
[    7.350916] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.358348] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    7.365234] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    7.373150] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.378140] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.383437] mousedev: PS/2 mouse device common for all mice
[    7.389626] rtc_cmos 00:04: RTC can wake from S4
[    7.394518] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    7.400681] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    7.407414] i2c /dev entries driver
[    7.411224] i801_smbus 0000:00:1f.3: SMBus using polling
[    7.416917] md: linear personality registered for level -1
[    7.422430] md: raid0 personality registered for level 0
[    7.427761] md: raid1 personality registered for level 1
[    7.433086] md: raid10 personality registered for level 10
[    7.438749] md: raid6 personality registered for level 6
[    7.444083] md: raid5 personality registered for level 5
[    7.449406] md: raid4 personality registered for level 4
[    7.454839] device-mapper: uevent: version 1.0.3
[    7.459640] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    7.468310] sdhci: Secure Digital Host Controller Interface driver
[    7.474522] sdhci: Copyright(c) Pierre Ossman
[    7.478952] EFI Variables Facility v0.08 2004-May-17
[    7.529318] pstore: Registered efi as persistent store backend
[    7.535234] hidraw: raw HID events driver (C) Jiri Kosina
[    7.541640] usbcore: registered new interface driver usbhid
[    7.547233] usbhid: USB HID core driver
[    7.551264] input: Unspecified device as /devices/virtual/input/input5
[    7.558018] Virtual Mouse Driver Initialized.
[    7.562457] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    7.569128] IPVS: Registered protocols (TCP, UDP)
[    7.573916] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    7.581330] IPVS: Creating netns size=1936 id=0
[    7.585969] IPVS: ipvs loaded.
[    7.589146] arp_tables: (C) 2002 David S. Miller
[    7.594280] NET: Registered protocol family 10
[    7.599322] NET: Registered protocol family 17
[    7.603805] 8021q: 802.1Q VLAN Support v1.8
[    7.608050] Key type dns_resolver registered
[    7.612834] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x351
[    7.618773] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x351
[    7.624806] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.633642] SSE version of gcm_enc/dec engaged.
[    7.634692] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    7.646091] registered taskstats version 1
[    7.651426] Btrfs loaded, debug=on
[    7.655736] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.661974]   Magic number: 7:913:177
[    7.665847] acpi device:0d: hash matches
[    7.669850] console [netcon0] enabled
[    7.672413] ata3.00: ATA-6: WD      My Book         1105, 1015, max UDMA/133
[    7.672417] ata3.00: 1953508784 sectors, multi 0: LBA48 
[    7.685935] netconsole: network logging started
[    7.690536] rtc_cmos 00:04: setting system clock to 2019-02-14 12:10:52 UTC (1550146252)
[    7.698665] ata3.00: configured for UDMA/133
[    7.703274] scsi 2:0:0:0: Direct-Access     ATA      WD      My Book  1015 PQ: 0 ANSI: 5
[    7.703565] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    7.703566] EDD information not available.
[    7.703686] PM: Hibernation image not present or could not be loaded.
[    7.722062] sd 2:0:0:0: [sdc] 1953508784 512-byte logical blocks: (1.00 TB/932 GiB)
[    7.730482] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    7.736515] sd 2:0:0:0: [sdc] Write Protect is off
[    7.741479] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    7.741539] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.773132]  sdc: sdc1
[    7.821313] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
[    7.828646] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    7.836440] usb 1-1: Product: CSR8510 A10
[    7.877053] sd 2:0:0:0: [sdc] Attached SCSI disk
[    7.881844] asustor add disk dev sdc 
[    7.994694] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[    8.043709] ata4: SATA link down (SStatus 0 SControl 300)
[    8.049639] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    8.058989] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    8.067466] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[    8.073218] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    8.079252] sd 4:0:0:0: [sdd] Write Protect is off
[    8.084486] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    8.084555] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.130320] usb 1-2: New USB device found, idVendor=051d, idProduct=0002
[    8.137650] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    8.145463] usb 1-2: Product: Back-UPS XS 950U   FW:925.T2 .I USB FW:T2 
[    8.152807] usb 1-2: Manufacturer: American Power Conversion
[    8.158993] usb 1-2: SerialNumber: 4B1827P00736  
[    8.164349] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    8.174854]  sdd: sdd1
[    8.278217] sd 4:0:0:0: [sdd] Attached SCSI disk
[    8.283289] asustor add disk dev sdd 
[    8.495209] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 950U   FW:925.T2 .I USB FW:T2 ] on usb-0000:00:14.0-2/input0
[    8.538703] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    8.545549] ata6.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
[    8.552519] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    8.560371] ata6.00: configured for UDMA/133
[    8.565065] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00L 1A01 PQ: 0 ANSI: 5
[    8.574378] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.582763] sd 5:0:0:0: [sde] 4096-byte physical blocks
[    8.588536] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    8.594570] sd 5:0:0:0: [sde] Write Protect is off
[    8.599811] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    8.599879] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.665697] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[    8.838054] usb 1-3: New USB device found, idVendor=125f, idProduct=601a
[    8.845412] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.853223] usb 1-3: Product: IUM01-512MFHL
[    8.857815] usb 1-3: Manufacturer: ADATA
[    8.862098] usb 1-3: SerialNumber: 120825741539000430
[    8.867812] usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    8.877537] usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    8.887493] usb-storage 1-3:1.0: USB Mass Storage device detected
[    8.894331] scsi host6: usb-storage 1-3:1.0
[    9.051699] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[    9.183832]  sde: sde1
[    9.222909] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[    9.230243] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    9.238037] usb 1-4: Product: USB 2.0 Hub [MTT]
[    9.243473] hub 1-4:1.0: USB hub found
[    9.247620] hub 1-4:1.0: 4 ports detected
[    9.287189] sd 5:0:0:0: [sde] Attached SCSI disk
[    9.292257] asustor add disk dev sde 
[    9.295045] Freeing unused kernel memory: 888K (ffffffff81ca6000 - ffffffff81d84000)
[    9.303071] Write protecting the kernel read-only data: 12288k
[    9.310447] Freeing unused kernel memory: 1516K (ffff880001685000 - ffff880001800000)
[    9.328078] Freeing unused kernel memory: 932K (ffff880001b17000 - ffff880001c00000)
[    9.901581] scsi 6:0:0:0: Direct-Access     ADATA    IUM01-512MFHL    0100 PQ: 0 ANSI: 0 CCS
[    9.913093] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    9.921044] sd 6:0:0:0: [sdf] 1007616 512-byte logical blocks: (516 MB/492 MiB)
[    9.932178] sd 6:0:0:0: [sdf] Write Protect is off
[    9.937425] sd 6:0:0:0: [sdf] Mode Sense: 43 00 00 00
[    9.956613] sd 6:0:0:0: [sdf] No Caching mode page found
[    9.962391] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[    9.987684]  sdf: sdf1 sdf2 sdf3
[   10.299307] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[   10.961084] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null)
[   10.979365] random: nonblocking pool is initialized
[   10.986194] nasmand (887): /proc/905/oom_adj is deprecated, please use /proc/905/oom_score_adj instead.
[   11.097451] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.211965] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   11.379919] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null)
[   12.101895] md: md0 stopped.
[   12.107390] md: bind<sda2>
[   12.134772] md/raid1:md0: active with 1 out of 4 mirrors
[   12.140264] asustor add disk dev md0 
[   12.140321] md0: detected capacity change from 0 to 2145386496
[   12.260355] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   12.307930] EXT4-fs (md0): re-mounted. Opts: (null)
[   12.529516] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[   12.557114] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null)
[   14.799274] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   14.806171] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[   14.813301] tg3 0000:03:00.0 eth0: EEE is enabled
[   14.818301] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.323171] md: md126 stopped.
[   20.349983] md: bind<sda3>
[   20.365021] md/raid1:md126: active with 1 out of 4 mirrors
[   20.371035] asustor add disk dev md126 
[   20.371089] md126: detected capacity change from 0 to 2145386496
[   20.446138] Adding 2095100k swap on /dev/md126.  Priority:-1 extents:1 across:2095100k 
[   20.486211] md: md1 stopped.
[   20.492309] md: bind<sda4>
[   20.525741] md/raid1:md1: active with 1 out of 1 mirrors
[   20.531288] asustor add disk dev md1 
[   20.531342] md1: detected capacity change from 0 to 995506520064
[   20.883712] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1
[   22.004722] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   23.953221] jnl: driver (UFSD_HEAD lke_9.5.7_b449) loaded at ffffffffa002f000
[   23.964709] ufsd: module license 'Commercial product' taints kernel.
[   23.971396] Disabling lock debugging due to kernel taint
[   23.994150] ufsd: driver (UFSD_HEAD lke_9.5.7_b449, acl, ioctl, sd2(5), tr, car) loaded at ffffffffa003e000
[   23.994150] NTFSJ support included
[   23.994150] Hfs+J support included
[   23.994150] Build_for__Asustor_AS-6xx_k4.1.0_2016-02-01_lke_9.5.7_b449
[   24.018017] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k
[   24.024469] ufsd: Kernel .config hash: original 0x9d41e7bd, current matched.
[   25.076848] ufsd: "mount" (sdc1): is mounted as NTFS at 2019-02-14 12:11:09
[   28.968869] ufsd: "mount" (sdd1): is mounted as NTFS at 2019-02-14 12:11:13
[   29.743615] ufsd: "mount" (sde1): is mounted as NTFS at 2019-02-14 12:11:14
[   29.934864] ufsd: "mount" (sdb1): is mounted as NTFS at 2019-02-14 12:11:14
[   52.460418] ip_tables: (C) 2000-2006 Netfilter Core Team
[   59.724307] sys_stat: module is from the staging directory, the quality is unknown, you have been warned.
[   59.894341] [drm] Initialized drm 1.1.0 20060810
[   60.097760] [drm] Memory usable by graphics device = 2048M
[   60.103827] [drm] Replacing VGA console driver
[   60.108991] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   60.116198] [drm] Driver supports precise vblank timestamp query.
[   60.143698] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   60.288336] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   60.425395] acpi device:2b: registered as cooling_device3
[   60.512292] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   60.572499] i915 0000:00:02.0: No connectors reported connected with modes
[   60.579691] [drm] Cannot find any crtc or sizes - going 1024x768
[   60.608533] fbcon: inteldrmfb (fb0) is primary device
[   60.608901] Console: switching to colour frame buffer device 128x48
[   60.674750] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   60.696383] intelfb: intelfb_init
[   60.696389] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[   60.708450] intelfb: Version 0.9.6
[   60.991513] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   61.039055] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   61.050348] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   61.058532] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   61.066373] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   61.074442] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   61.082230] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   61.089258] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   61.097034] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   61.104869] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   61.110944] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[   61.226885] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   61.285333] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   61.360102] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   61.449078] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   61.513675] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   61.579171] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   61.628180] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   61.673635] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   61.729447] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   61.772117] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   67.361872] iscsi-scst: ***WARNING***: CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETION_NOTIFICATION not enabled in your kernel. ISCSI-SCST will be working with not the best performance. Refer README file for details.
[   67.731562] Loading iSCSI transport class v2.0-870.
[   67.882256] iscsi: registered transport (tcp)
[   71.679856] usbip_core: USB/IP Core v1.0.0
[   71.728983] usbip-host 1-1:1.0: 1-1 is not in match_busid table... skip!
[   71.735956] usbip-host 1-1:1.1: 1-1 is not in match_busid table... skip!
[   71.743161] usbcore: registered new interface driver usbip-host
[   71.749395] usbip_host: USB/IP Host Driver v1.0.0
[   75.914444] cryptodev: driver 1.8 loaded.
[   78.651249] Bluetooth: Core ver 2.21
[   78.655060] NET: Registered protocol family 31
[   78.659749] Bluetooth: HCI device and connection manager initialized
[   78.666340] Bluetooth: HCI socket layer initialized
[   78.671514] Bluetooth: L2CAP socket layer initialized
[   78.676831] Bluetooth: SCO socket layer initialized
[   78.719970] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   78.725534] Bluetooth: BNEP filters: protocol multicast
[   78.731120] Bluetooth: BNEP socket layer initialized
[   78.845784] Bluetooth: RFCOMM TTY layer initialized
[   78.851181] Bluetooth: RFCOMM socket layer initialized
[   78.856808] Bluetooth: RFCOMM ver 1.11
[   78.916158] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   78.922406] Bluetooth: HIDP socket layer initialized
[   79.090273] Bluetooth: HCI UART driver ver 2.3
[   79.095180] Bluetooth: HCI UART protocol H4 registered
[   79.100806] Bluetooth: HCI UART protocol BCSP registered
[   79.106580] Bluetooth: HCI UART protocol LL registered
[   79.112248] Bluetooth: HCI UART protocol ATH3K registered
[   79.118178] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   79.125091] Bluetooth: HCI UART protocol Intel registered
[   79.131037] Bluetooth: HCI UART protocol BCM registered
[   79.136753] Bluetooth: HCI UART protocol QCA registered
[   79.222264] usbcore: registered new interface driver btusb
[   79.898569] Bluetooth: Unable to create CMAC crypto context
[   96.538684] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   96.821823] usbcore: registered new interface driver snd-usb-audio
>[  182.863934] udevd[6069]: starting version 3.2
>[  182.927618] udevd[6070]: starting eudev-3.2
User avatar
iobi
Posts: 19
Joined: Mon Feb 13, 2017 6:00 pm

Re: AS6104T MyArchive random unmount

Post by iobi »

Some idea?
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: AS6104T MyArchive random unmount

Post by orion »

I did not find any abnormal things. Did you upgrade the new ADM and send the support requests?
User avatar
iobi
Posts: 19
Joined: Mon Feb 13, 2017 6:00 pm

Re: AS6104T MyArchive random unmount

Post by iobi »

I did not find any abnormal things.
:( I think it's relatively worrying, am I wrong?
Did you upgrade the new ADM and send the support request
Yes, updated to 3.2.6.RPS2.
I opened a ticket on 10 October 2018.
Last response of the assistance is 19 November 2018
My last reply was 22 November 2018 (I rewrote yesterday, 04 March 2019).

I hope in a quick response to possibly take advantage of technical assistance.
(Not before the latest tests)
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: AS6104T MyArchive random unmount

Post by orion »

Wow, that takes too long!
User avatar
iobi
Posts: 19
Joined: Mon Feb 13, 2017 6:00 pm

Re: AS6104T MyArchive random unmount

Post by iobi »

I do not know.
To date, I have no answer yet (I wrote March 4).
Do they not know the solution or cannot provide the solution?
It seems like too long times ...
User avatar
iobi
Posts: 19
Joined: Mon Feb 13, 2017 6:00 pm

Re: AS6104T MyArchive random unmount

Post by iobi »

I'm back.
I finally had time to re-install the original ram (2x1GB) for new tests (the most "scientific" possible).

I have disconnected ALL external devices. Only the SPDIF cable remained connected.

1st reboot (March 17th). A few moments of indecision entering the web interface, but then it started.
Result: an unmounted volume.
Image

2nd reboot (March 17th). All smooth. All volumes correctly mounted! I thought: randomness.
Image

3rd reboot (March 18th, scheduled). Usually start/reboot problem with green light in loop, BUT ALSO SMOOTH. All volumes correctly mounted. I deduced: my 8GB ram card is not compatible. SIGH.
(I didn't take screen)

4th restart (March 19). Horror. Two volumes (different) disassembled. Nothing changed / connected in the nas.
Image

5th reboot (March 19). Same as 4th, two volumes disassembled.
Image

Discouragement.

I don't know what to think/do anymore. Only the factory reset remains. Assistance does NOT answer me.

I add the screens and the dmesg today 19 March (the enthusiasm of the past few days has made me forget to take the dmesg)
PS: Sorry for the layout, I didn't know how to share the images in the best way.

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.24 (root@sw1-server) (gcc version 4.6.4 (crosstool-NG crosstool-ng-1.22.0 - x86_64 64-bit toolchain - ASUSTOR Inc.) ) #1 SMP Mon Jan 28 00:39:33 CST 2019
[    0.000000] Command line: BOOT_IMAGE=(hd0,gpt3)/bzImage console=ttyS0,115200n8 bootpart=3 uuid=35cfd085-e092-4a21-81ec-b8bb02ad17c2
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x000000000008ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078e38fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078e39000-0x0000000079838fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079839000-0x000000007b238fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b239000-0x000000007b278fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007b279000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7b278014  SMBIOS=0x791c8000  ESRT=0x791cca18 
[    0.000000] esrt: Reserving ESRT space from 0x00000000791cca18 to 0x00000000791cca50.
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Insyde AS61xx/Type2 - Board Product Name, BIOS V1.35 11/02/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07E000000 mask FFE000000 uncachable
[    0.000000]   3 base 07D000000 mask FFF000000 uncachable
[    0.000000]   4 base 07C800000 mask FFF800000 uncachable
[    0.000000]   5 base 07C400000 mask FFFC00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000013000] 13000 size 24576
[    0.000000] BRK [0x01e6d000, 0x01e6dfff] PGTABLE
[    0.000000] BRK [0x01e6e000, 0x01e6efff] PGTABLE
[    0.000000] BRK [0x01e6f000, 0x01e6ffff] PGTABLE
[    0.000000] BRK [0x01e70000, 0x01e70fff] PGTABLE
[    0.000000] BRK [0x01e71000, 0x01e71fff] PGTABLE
[    0.000000] BRK [0x01e72000, 0x01e72fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3650c000-0x3727dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007B278014 000024 (v02 INSYDE)
[    0.000000] ACPI: XSDT 0x000000007B278120 00008C (v01 INSYDE INSYDE   00000003      01000013)
[    0.000000] ACPI: FACP 0x000000007B274000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007B264000 00C6A4 (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007B235000 000040
[    0.000000] ACPI: UEFI 0x000000007B277000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000007B275000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007B273000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007B272000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000007B271000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B263000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B262000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B261000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007B260000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007B25F000 000DF9 (v01 INSYDE SIOACPI  00001000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000007B25E000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000007B25D000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x78af5000-0x78af8fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007bffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.000000]   node   0: [mem 0x0000000000070000-0x000000000008ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000078e38fff]
[    0.000000]   node   0: [mem 0x000000007b279000-0x000000007bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
[    0.000000] On node 0 totalpages: 498510
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1160 pages reserved
[    0.000000]   DMA zone: 3982 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7872 pages used for memmap
[    0.000000]   DMA32 zone: 494528 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78e39000-0x79838fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79839000-0x7b238fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b239000-0x7b278fff]
[    0.000000] e820: [mem 0x7ec00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff880078800000 s88216 r8192 d30568 u524288
[    0.000000] pcpu-alloc: s88216 r8192 d30568 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 489414
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=(hd0,gpt3)/bzImage console=ttyS0,115200n8 bootpart=3 uuid=35cfd085-e092-4a21-81ec-b8bb02ad17c2
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 1899540K/1994040K available (6667K kernel code, 658K rwdata, 3164K rodata, 888K init, 904K bss, 94500K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1599.896 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.79 BogoMIPS (lpj=1599896)
[    0.010688] pid_max: default: 32768 minimum: 301
[    0.015338] ACPI: Core revision 20150930
[    0.042739] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.051003] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.059321] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.066943] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.073690] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.081265] Initializing cgroup subsys io
[    0.085320] Initializing cgroup subsys memory
[    0.089714] Initializing cgroup subsys devices
[    0.094184] Initializing cgroup subsys freezer
[    0.098655] Initializing cgroup subsys net_cls
[    0.103127] Initializing cgroup subsys perf_event
[    0.107860] Initializing cgroup subsys net_prio
[    0.112425] Initializing cgroup subsys hugetlb
[    0.116890] Initializing cgroup subsys pids
[    0.121131] CPU: Physical Processor ID: 0
[    0.125166] CPU: Processor Core ID: 0
[    0.128853] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.134879] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.147395] mce: CPU supports 6 MCE banks
[    0.151437] CPU0: Thermal monitoring enabled (TM1)
[    0.156256] process: using mwait in idle threads
[    0.160903] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.166327] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.173090] Freeing SMP alternatives memory: 20K (ffffffff81d84000 - ffffffff81d89000)
[    0.188550] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.204595] TSC deadline timer enabled
[    0.204602] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3050  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.214731] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.225169] ... version:                3
[    0.229186] ... bit width:              40
[    0.233295] ... generic registers:      2
[    0.237315] ... value mask:             000000ffffffffff
[    0.242637] ... max period:             000000ffffffffff
[    0.247958] ... fixed-purpose events:   3
[    0.251983] ... event mask:             0000000700000003
[    0.258064] x86: Booting SMP configuration:
[    0.262274] .... node  #0, CPUs:      #1
[    0.273748] x86: Booted up 1 node, 2 CPUs
[    0.277970] smpboot: Total of 2 processors activated (6399.58 BogoMIPS)
[    0.285440] devtmpfs: initialized
[    0.297661] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[    0.305417] PM: Registering ACPI NVS region [mem 0x79839000-0x7b238fff] (27262976 bytes)
[    0.314668] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.324576] xor: measuring software checksum speed
[    0.339412]    prefetch64-sse:  5488.000 MB/sec
[    0.353987]    generic_sse:  4948.000 MB/sec
[    0.358272] xor: using function: prefetch64-sse (5488.000 MB/sec)
[    0.364627] RTC time: 10:22:22, date: 03/19/19
[    0.369527] NET: Registered protocol family 16
[    0.378021] cpuidle: using governor ladder
[    0.386167] cpuidle: using governor menu
[    0.390313] ACPI: bus type PCI registered
[    0.394460] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.403777] PCI: not using MMCONFIG
[    0.407281] PCI: Using configuration type 1 for base access
[    0.437036] raid6: sse2x1   gen()   601 MB/s
[    0.458378] raid6: sse2x1   xor()  1787 MB/s
[    0.479723] raid6: sse2x2   gen()   976 MB/s
[    0.501056] raid6: sse2x2   xor()  1998 MB/s
[    0.522399] raid6: sse2x4   gen()  1386 MB/s
[    0.543748] raid6: sse2x4   xor()  1808 MB/s
[    0.548029] raid6: using algorithm sse2x4 gen() 1386 MB/s
[    0.553437] raid6: .... xor() 1808 MB/s, rmw enabled
[    0.558411] raid6: using ssse3x2 recovery algorithm
[    0.563403] ACPI: Added _OSI(Module Device)
[    0.567606] ACPI: Added _OSI(Processor Device)
[    0.572066] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.576779] ACPI: Added _OSI(Processor Aggregator Device)
[    0.599256] ACPI: Dynamic OEM Table Load:
[    0.603366] ACPI: SSDT 0xFFFF880074AB8800 000634 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.613723] ACPI: Dynamic OEM Table Load:
[    0.617818] ACPI: SSDT 0xFFFF880074A7E400 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.628654] ACPI: Interpreter enabled
[    0.632373] ACPI: (supports S0 S3 S4 S5)
[    0.636315] ACPI: Using IOAPIC for interrupt routing
[    0.641361] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.653215] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.661939] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.677309] ACPI: Power Resource [USBC] (on)
[    0.690005] ACPI: Power Resource [CLK0] (on)
[    0.694888] ACPI: Power Resource [CLK0] (on)
[    0.699276] ACPI: Power Resource [CLK1] (on)
[    0.709671] ACPI: Power Resource [ID3C] (off)
[    0.720037] ACPI: Power Resource [FN00] (off)
[    0.725609] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.731814] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.740128] \_SB_.PCI0:_OSC invalid UUID
[    0.740132] _OSC request data:1 1f 0 
[    0.740141] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.746450] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.757228] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff window]; [mem 0x80000000-0xdfffffff window] ignored
[    0.769759] PCI host bridge to bus 0000:00
[    0.773880] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.780071] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.786868] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.793677] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.800476] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.807971] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.815461] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.822956] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.830447] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.835959] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.836304] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.836343] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.836359] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.836373] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.836637] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.836718] pci 0000:00:13.0: reg 0x20: [io  0x3060-0x307f]
[    0.836733] pci 0000:00:13.0: reg 0x24: [mem 0x91614000-0x916147ff]
[    0.836789] pci 0000:00:13.0: PME# supported from D3hot
[    0.837009] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.837058] pci 0000:00:14.0: reg 0x10: [mem 0x91600000-0x9160ffff 64bit]
[    0.837151] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.837296] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.843075] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.843115] pci 0000:00:1a.0: reg 0x10: [mem 0x91500000-0x915fffff]
[    0.843130] pci 0000:00:1a.0: reg 0x14: [mem 0x91400000-0x914fffff]
[    0.843217] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.843512] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.843565] pci 0000:00:1b.0: reg 0x10: [mem 0x91610000-0x91613fff 64bit]
[    0.843667] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.843792] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.849570] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.849684] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.849803] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.855577] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.855692] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.855817] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.861592] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.861706] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.861825] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.867595] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[    0.867710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.867829] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.873612] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.873942] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.874024] pci 0000:00:1f.3: reg 0x10: [mem 0x91615000-0x9161501f]
[    0.874144] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.874560] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    0.874609] pci 0000:01:00.0: reg 0x10: [io  0x2028-0x202f]
[    0.874628] pci 0000:01:00.0: reg 0x14: [io  0x2034-0x2037]
[    0.874645] pci 0000:01:00.0: reg 0x18: [io  0x2020-0x2027]
[    0.874663] pci 0000:01:00.0: reg 0x1c: [io  0x2030-0x2033]
[    0.874681] pci 0000:01:00.0: reg 0x20: [io  0x2000-0x201f]
[    0.874699] pci 0000:01:00.0: reg 0x24: [mem 0x91300000-0x913001ff]
[    0.874718] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.874843] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.882559] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.887542] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.887551] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.887671] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.887720] pci 0000:02:00.0: reg 0x10: [io  0x1028-0x102f]
[    0.887738] pci 0000:02:00.0: reg 0x14: [io  0x1034-0x1037]
[    0.887757] pci 0000:02:00.0: reg 0x18: [io  0x1020-0x1027]
[    0.887775] pci 0000:02:00.0: reg 0x1c: [io  0x1030-0x1033]
[    0.887793] pci 0000:02:00.0: reg 0x20: [io  0x1000-0x101f]
[    0.887811] pci 0000:02:00.0: reg 0x24: [mem 0x91200000-0x912001ff]
[    0.887830] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.887952] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.895664] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.900648] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.900656] pci 0000:00:1c.1:   bridge window [mem 0x91200000-0x912fffff]
[    0.900786] pci 0000:03:00.0: [14e4:16b1] type 00 class 0x020000
[    0.900869] pci 0000:03:00.0: reg 0x10: [mem 0x91110000-0x9111ffff 64bit pref]
[    0.900902] pci 0000:03:00.0: reg 0x18: [mem 0x91100000-0x9110ffff 64bit pref]
[    0.900964] pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.901087] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.901174] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.908882] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.913873] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff 64bit pref]
[    0.913994] pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000
[    0.914077] pci 0000:04:00.0: reg 0x10: [mem 0x91010000-0x9101ffff 64bit pref]
[    0.914112] pci 0000:04:00.0: reg 0x18: [mem 0x91000000-0x9100ffff 64bit pref]
[    0.914173] pci 0000:04:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.914296] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.914383] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.922093] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.927088] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    0.929978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.937517] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.944855] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.952190] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.959523] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.966860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.974199] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.981726] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.990898] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.995988] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.001661] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.009771] vgaarb: loaded
[    1.012497] vgaarb: bridge control possible 0000:00:02.0
[    1.017981] SCSI subsystem initialized
[    1.021857] libata version 3.00 loaded.
[    1.021926] ACPI: bus type USB registered
[    1.026008] usbcore: registered new interface driver usbfs
[    1.031538] usbcore: registered new interface driver hub
[    1.036888] usbcore: registered new device driver usb
[    1.042003] pps_core: LinuxPPS API ver. 1 registered
[    1.046987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.056139] PTP clock support registered
[    1.060294] PCI: Using ACPI for IRQ routing
[    1.067086] PCI: pci_cache_line_size set to 64 bytes
[    1.067180] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    1.067185] e820: reserve RAM buffer [mem 0x78e39000-0x7bffffff]
[    1.067620] clocksource: Switched to clocksource refined-jiffies
[    1.073863] pnp: PnP ACPI init
[    1.077258] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.083195] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.089130] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.095070] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.095732] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.098356] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.098567] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.105548] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.112176] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.118810] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.125437] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.132067] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.138695] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
[    1.145318] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.151949] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.158583] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.158965] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.159299] pnp: PnP ACPI: found 5 devices
[    1.173060] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.181975] clocksource: Switched to clocksource acpi_pm
[    1.187343] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.197285] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.207222] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    1.217164] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    1.227155] pci 0000:00:1c.2: BAR 14: assigned [mem 0x91700000-0x917fffff]
[    1.234070] pci 0000:00:1c.3: BAR 14: assigned [mem 0x91800000-0x918fffff]
[    1.241008] pci 0000:01:00.0: BAR 6: assigned [mem 0x91310000-0x9131ffff pref]
[    1.248264] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.253264] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.259396] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x913fffff]
[    1.266230] pci 0000:02:00.0: BAR 6: assigned [mem 0x91210000-0x9121ffff pref]
[    1.273484] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.278487] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.284615] pci 0000:00:1c.1:   bridge window [mem 0x91200000-0x912fffff]
[    1.291446] pci 0000:03:00.0: BAR 6: assigned [mem 0x91700000-0x917007ff pref]
[    1.298696] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.303706] pci 0000:00:1c.2:   bridge window [mem 0x91700000-0x917fffff]
[    1.310531] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff 64bit pref]
[    1.318309] pci 0000:04:00.0: BAR 6: assigned [mem 0x91800000-0x918007ff pref]
[    1.325548] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.330553] pci 0000:00:1c.3:   bridge window [mem 0x91800000-0x918fffff]
[    1.337381] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    1.345156] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.345162] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.345167] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.345172] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.345177] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.345181] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.345186] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.345191] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.345196] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.345201] pci_bus 0000:01: resource 1 [mem 0x91300000-0x913fffff]
[    1.345205] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    1.345210] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    1.345215] pci_bus 0000:03: resource 1 [mem 0x91700000-0x917fffff]
[    1.345220] pci_bus 0000:03: resource 2 [mem 0x91100000-0x911fffff 64bit pref]
[    1.345225] pci_bus 0000:04: resource 1 [mem 0x91800000-0x918fffff]
[    1.345230] pci_bus 0000:04: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[    1.345293] NET: Registered protocol family 2
[    1.350052] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.357399] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    1.364138] TCP: Hash tables configured (established 16384 bind 16384)
[    1.370769] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    1.376842] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    1.383437] NET: Registered protocol family 1
[    1.387868] pci 0000:00:02.0: Video device with shadowed ROM
[    1.390022] PCI: CLS 64 bytes, default 64
[    1.390203] Trying to unpack rootfs image as initramfs...
[    4.549356] Freeing initrd memory: 13768K (ffff88003650c000 - ffff88003727e000)
[    4.557044] Scanning for low memory corruption every 60 seconds
[    4.563980] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    4.570254] audit: initializing netlink subsys (disabled)
[    4.575723] audit: type=2000 audit(1552990944.857:1): initialized
[    4.582572] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.593534] VFS: Disk quotas dquot_6.6.0
[    4.597597] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.605517] fuse init (API version 7.23)
[    4.612779] NET: Registered protocol family 38
[    4.617360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    4.624892] io scheduler noop registered
[    4.628856] io scheduler deadline registered
[    4.633244] io scheduler cfq registered (default)
[    4.639058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.644673] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.651572] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    4.659951] ACPI: Power Button [PWRB]
[    4.663763] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    4.672149] ACPI: Sleep Button [SLPB]
[    4.675954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.683379] ACPI: Power Button [PWRF]
[    4.691589] thermal LNXTHERM:00: registered as thermal_zone0
[    4.697295] ACPI: Thermal Zone [TZ01] (27 C)
[    4.701806] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.729512] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.758608] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    4.770234] Linux agpgart interface v0.103
[    4.781927] brd: module loaded
[    4.788358] loop: module loaded
[    4.791877] ahci 0000:00:13.0: version 3.0
[    4.792283] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.800411] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
[    4.809848] scsi host0: ahci
[    4.813072] scsi host1: ahci
[    4.816162] ata1: SATA max UDMA/133 abar m2048@0x91614000 port 0x91614100 irq 115
[    4.823667] ata2: SATA max UDMA/133 abar m2048@0x91614000 port 0x91614180 irq 115
[    4.831440] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    4.838186] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.846311] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    4.855575] scsi host2: ahci
[    4.858802] scsi host3: ahci
[    4.861845] ata3: SATA max UDMA/133 abar m512@0x91300000 port 0x91300100 irq 116
[    4.869283] ata4: SATA max UDMA/133 abar m512@0x91300000 port 0x91300180 irq 116
[    4.876952] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[    4.883646] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.891768] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    4.900962] scsi host4: ahci
[    4.904182] scsi host5: ahci
[    4.907262] ata5: SATA max UDMA/133 abar m512@0x91200000 port 0x91200100 irq 117
[    4.914695] ata6: SATA max UDMA/133 abar m512@0x91200000 port 0x91200180 irq 117
[    4.922435] tg3.c:v3.137 (May 11, 2014)
[    5.151193] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.157492] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.163995] ata1.00: ATA-9: WDC WD10EFRX-68FYTN0, 82.00A82, max UDMA/133
[    5.170749] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.178129] ata2.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[    5.184882] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.192177] ata3: SATA link down (SStatus 0 SControl 300)
[    5.197879] ata1.00: configured for UDMA/133
[    5.202542] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68F 0A82 PQ: 0 ANSI: 5
[    5.210815] ata2.00: configured for UDMA/133
[    5.215591] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.221192] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.228890] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.234549] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[    5.242848] sd 0:0:0:0: [sda] Write Protect is off
[    5.247673] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.247769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.257038] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.257096] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    5.257134] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    5.257336] sd 1:0:0:0: [sdb] Write Protect is off
[    5.257341] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.257427] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.316456]  sda: sda1 sda2 sda3 sda4
[    5.320630]  sdb: sdb1
[    5.398196] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.405290] ata5.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    5.411510] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.424688] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.429351] asustor add disk dev sdb 
[    5.430168] ata5.00: configured for UDMA/133
[    5.565149] tsc: Refined TSC clocksource calibration: 1599.948 MHz
[    5.571367] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff3c37d3, max_idle_ns: 440795211487 ns
[    5.594189] ata4: SATA link down (SStatus 0 SControl 300)
[    5.599967] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    5.608676] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    5.616451] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[    5.621777] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    5.627491] sd 4:0:0:0: [sdc] Write Protect is off
[    5.632344] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.632435] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.694694]  sdc: sdc1
[    5.728797] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.733443] asustor add disk dev sda 
[    5.798716] sd 4:0:0:0: [sdc] Attached SCSI disk
[    5.803376] asustor add disk dev sdc 
[    6.090183] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    6.097004] ata6.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
[    6.103747] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    6.111553] ata6.00: configured for UDMA/133
[    6.116192] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00L 1A01 PQ: 0 ANSI: 5
[    6.124852] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.132547] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[    6.137859] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    6.143478] sd 5:0:0:0: [sdd] Write Protect is off
[    6.148309] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    6.148394] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.154946] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 10:bf:48:8b:33:37
[    6.154951] tg3 0000:03:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    6.154955] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    6.154958] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    6.262577]  sdd: sdd1
[    6.365762] sd 5:0:0:0: [sdd] Attached SCSI disk
[    6.370416] asustor add disk dev sdd 
[    6.581319] clocksource: Switched to clocksource tsc
[    7.129100] tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 10:bf:48:8b:33:9b
[    7.139724] tg3 0000:04:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    7.149557] tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    7.157401] tg3 0000:04:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[    7.164267] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.171331] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.177137] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.182988] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.189027] usbcore: registered new interface driver catc
[    7.194576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.201123] ehci-pci: EHCI PCI platform driver
[    7.205609] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.211813] ohci-pci: OHCI PCI platform driver
[    7.216302] uhci_hcd: USB Universal Host Controller Interface driver
[    7.222970] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.228313] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    7.236902] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    7.245357] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    7.245585] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.252391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.259622] usb usb1: Product: xHCI Host Controller
[    7.264519] usb usb1: Manufacturer: Linux 4.4.24 xhci-hcd
[    7.269936] usb usb1: SerialNumber: 0000:00:14.0
[    7.274857] hub 1-0:1.0: USB hub found
[    7.278650] hub 1-0:1.0: 7 ports detected
[    7.284289] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.289635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    7.297179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    7.303985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.311220] usb usb2: Product: xHCI Host Controller
[    7.316115] usb usb2: Manufacturer: Linux 4.4.24 xhci-hcd
[    7.321537] usb usb2: SerialNumber: 0000:00:14.0
[    7.326458] hub 2-0:1.0: USB hub found
[    7.330258] hub 2-0:1.0: 6 ports detected
[    7.335860] usbcore: registered new interface driver cdc_acm
[    7.341546] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    7.349601] usbcore: registered new interface driver usblp
[    7.355147] usbcore: registered new interface driver usb-storage
[    7.361218] usbcore: registered new interface driver usbserial
[    7.367092] usbcore: registered new interface driver ftdi_sio
[    7.372868] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.380306] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    7.387201] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    7.395058] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.400052] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.405389] mousedev: PS/2 mouse device common for all mice
[    7.411562] rtc_cmos 00:04: RTC can wake from S4
[    7.416442] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    7.422607] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    7.429341] i2c /dev entries driver
[    7.433143] i801_smbus 0000:00:1f.3: SMBus using polling
[    7.438838] md: linear personality registered for level -1
[    7.444352] md: raid0 personality registered for level 0
[    7.449679] md: raid1 personality registered for level 1
[    7.455007] md: raid10 personality registered for level 10
[    7.460656] md: raid6 personality registered for level 6
[    7.465983] md: raid5 personality registered for level 5
[    7.471309] md: raid4 personality registered for level 4
[    7.476732] device-mapper: uevent: version 1.0.3
[    7.481532] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    7.490208] sdhci: Secure Digital Host Controller Interface driver
[    7.496416] sdhci: Copyright(c) Pierre Ossman
[    7.500833] EFI Variables Facility v0.08 2004-May-17
[    7.524878] pstore: Registered efi as persistent store backend
[    7.530804] hidraw: raw HID events driver (C) Jiri Kosina
[    7.537226] usbcore: registered new interface driver usbhid
[    7.542816] usbhid: USB HID core driver
[    7.546841] input: Unspecified device as /devices/virtual/input/input5
[    7.553566] Virtual Mouse Driver Initialized.
[    7.558002] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.564356] IPVS: Registered protocols (TCP, UDP)
[    7.569110] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    7.576493] IPVS: Creating netns size=1936 id=0
[    7.581109] IPVS: ipvs loaded.
[    7.584283] arp_tables: (C) 2002 David S. Miller
[    7.589363] NET: Registered protocol family 10
[    7.594434] NET: Registered protocol family 17
[    7.598922] 8021q: 802.1Q VLAN Support v1.8
[    7.603188] Key type dns_resolver registered
[    7.607951] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x351
[    7.613888] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x351
[    7.619904] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.628745] SSE version of gcm_enc/dec engaged.
[    7.634507] registered taskstats version 1
[    7.639819] Btrfs loaded, debug=on
[    7.644102]   Magic number: 11:291:376
[    7.648098] console [netcon0] enabled
[    7.651785] netconsole: network logging started
[    7.652196] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    7.662963] rtc_cmos 00:04: setting system clock to 2019-03-19 10:22:30 UTC (1552990950)
[    7.671895] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    7.677919] EDD information not available.
[    7.682122] PM: Hibernation image not present or could not be loaded.
[    7.685889] Freeing unused kernel memory: 888K (ffffffff81ca6000 - ffffffff81d84000)
[    7.694368] Write protecting the kernel read-only data: 12288k
[    7.702225] Freeing unused kernel memory: 1516K (ffff880001685000 - ffff880001800000)
[    7.722845] Freeing unused kernel memory: 932K (ffff880001b17000 - ffff880001c00000)
[    7.825626] usb 1-3: New USB device found, idVendor=125f, idProduct=601a
[    7.832956] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.840772] usb 1-3: Product: IUM01-512MFHL
[    7.845353] usb 1-3: Manufacturer: ADATA
[    7.849663] usb 1-3: SerialNumber: 120825741539000430
[    7.855473] usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    7.865170] usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    7.876600] usb-storage 1-3:1.0: USB Mass Storage device detected
[    7.887628] scsi host6: usb-storage 1-3:1.0
[    8.045235] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    8.215434] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[    8.222530] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    8.229964] usb 1-4: Product: USB 2.0 Hub [MTT]
[    8.235211] hub 1-4:1.0: USB hub found
[    8.239115] hub 1-4:1.0: 4 ports detected
[    8.902096] scsi 6:0:0:0: Direct-Access     ADATA    IUM01-512MFHL    0100 PQ: 0 ANSI: 0 CCS
[    8.948515] sd 6:0:0:0: [sde] 1007616 512-byte logical blocks: (516 MB/492 MiB)
[    8.948571] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    8.983289] sd 6:0:0:0: [sde] Write Protect is off
[    8.988308] sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
[    9.003377] sd 6:0:0:0: [sde] No Caching mode page found
[    9.008927] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    9.039691]  sde: sde1 sde2 sde3
[    9.347813] sd 6:0:0:0: [sde] Attached SCSI removable disk
[    9.536298] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[    9.555511] nasmand (703): /proc/797/oom_adj is deprecated, please use /proc/797/oom_score_adj instead.
[    9.664270] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.789571] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.871360] random: dd: uninitialized urandom read (512 bytes read, 118 bits of entropy available)
[    9.936492] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[    9.947453] random: nonblocking pool is initialized
[   10.477739] md: md0 stopped.
[   10.481709] md: bind<sda2>
[   10.496968] md/raid1:md0: active with 1 out of 4 mirrors
[   10.502520] asustor add disk dev md0 
[   10.502576] md0: detected capacity change from 0 to 2145386496
[   10.670803] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   10.729484] EXT4-fs (md0): re-mounted. Opts: (null)
[   11.028876] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[   11.057825] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[   13.483982] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   13.491250] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[   13.498762] tg3 0000:03:00.0 eth0: EEE is enabled
[   13.504003] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.216778] md: md126 stopped.
[   19.249340] md: bind<sda3>
[   19.260435] md/raid1:md126: active with 1 out of 4 mirrors
[   19.266125] asustor add disk dev md126 
[   19.266173] md126: detected capacity change from 0 to 2145386496
[   19.345243] Adding 2095100k swap on /dev/md126.  Priority:-1 extents:1 across:2095100k 
[   19.385258] md: md1 stopped.
[   19.389137] md: bind<sda4>
[   19.406936] md/raid1:md1: active with 1 out of 1 mirrors
[   19.412477] asustor add disk dev md1 
[   19.412528] md1: detected capacity change from 0 to 995506520064
[   19.749760] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1
[   20.371532] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   27.176030] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.592002] jnl: driver (UFSD_HEAD lke_9.5.7_b449) loaded at ffffffffa0059000
[   27.602295] ufsd: module license 'Commercial product' taints kernel.
[   27.609599] Disabling lock debugging due to kernel taint
[   27.621365] ufsd: driver (UFSD_HEAD lke_9.5.7_b449, acl, ioctl, sd2(5), tr, car) loaded at ffffffffa0068000
[   27.621365] NTFSJ support included
[   27.621365] Hfs+J support included
[   27.621365] Build_for__Asustor_AS-6xx_k4.1.0_2016-02-01_lke_9.5.7_b449
[   27.646290] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k
[   27.653532] ufsd: Kernel .config hash: original 0x9d41e7bd, current matched.
[   28.295237] ufsd: "mount" (sdb1): is mounted as NTFS at 2019-03-19 10:22:50
[   28.353324] ufsd: "mount" (sdd1): is mounted as NTFS at 2019-03-19 10:22:50
[   29.232849] ufsd: "mount" (sdc1): is mounted as NTFS at 2019-03-19 10:22:51
[   52.979855] sys_stat: module is from the staging directory, the quality is unknown, you have been warned.
[   53.151230] [drm] Initialized drm 1.1.0 20060810
[   53.349061] [drm] Memory usable by graphics device = 2048M
[   53.355053] [drm] Replacing VGA console driver
[   53.360328] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   53.367516] [drm] Driver supports precise vblank timestamp query.
[   53.411830] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   53.603241] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   53.706737] acpi device:2b: registered as cooling_device3
[   53.782583] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   53.866739] i915 0000:00:02.0: No connectors reported connected with modes
[   53.873995] [drm] Cannot find any crtc or sizes - going 1024x768
[   53.895847] fbcon: inteldrmfb (fb0) is primary device
[   53.896046] Console: switching to colour frame buffer device 128x48
[   53.962729] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   54.002357] intelfb: intelfb_init
[   54.002362] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[   54.014575] intelfb: Version 0.9.6
[   54.311232] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   54.350106] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   54.362051] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   54.370666] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   54.378982] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   54.385929] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   54.394069] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   54.401417] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   54.409436] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   54.417488] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   54.425187] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[   54.552230] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   54.605287] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   54.674947] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   54.746955] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   54.818766] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   54.868968] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   54.900993] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   54.948751] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   54.973405] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   55.008207] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   62.008864] iscsi-scst: ***WARNING***: CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETION_NOTIFICATION not enabled in your kernel. ISCSI-SCST will be working with not the best performance. Refer README file for details.
[   62.356112] Loading iSCSI transport class v2.0-870.
[   62.785001] iscsi: registered transport (tcp)
[   69.618274] usbip_core: USB/IP Core v1.0.0
[   69.683581] usbcore: registered new interface driver usbip-host
[   69.689790] usbip_host: USB/IP Host Driver v1.0.0
[   75.644303] cryptodev: driver 1.8 loaded.
[   80.248493] Bluetooth: Core ver 2.21
[   80.252451] NET: Registered protocol family 31
[   80.257322] Bluetooth: HCI device and connection manager initialized
[   80.264303] Bluetooth: HCI socket layer initialized
[   80.269623] Bluetooth: L2CAP socket layer initialized
[   80.275183] Bluetooth: SCO socket layer initialized
[   80.363766] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   80.369296] Bluetooth: BNEP filters: protocol multicast
[   80.374827] Bluetooth: BNEP socket layer initialized
[   80.417376] Bluetooth: RFCOMM TTY layer initialized
[   80.422770] Bluetooth: RFCOMM socket layer initialized
[   80.428428] Bluetooth: RFCOMM ver 1.11
[   80.448572] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   80.455054] Bluetooth: HIDP socket layer initialized
[   80.596509] Bluetooth: HCI UART driver ver 2.3
[   80.601391] Bluetooth: HCI UART protocol H4 registered
[   80.607041] Bluetooth: HCI UART protocol BCSP registered
[   80.612857] Bluetooth: HCI UART protocol LL registered
[   80.618445] Bluetooth: HCI UART protocol ATH3K registered
[   80.624341] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   80.631297] Bluetooth: HCI UART protocol Intel registered
[   80.637264] Bluetooth: HCI UART protocol BCM registered
[   80.642954] Bluetooth: HCI UART protocol QCA registered
[   80.740750] usbcore: registered new interface driver btusb
[   90.203930] usbcore: registered new interface driver snd-usb-audio
>[  160.166485] udevd[7204]: starting version 3.2
>[  160.338355] udevd[7207]: starting eudev-3.2
Post Reply

Return to “[Official] For AS61XX/62XX Series”