ACC won't discover my NAS
-
- Posts: 10
- youtube meble na wymiar Warszawa
- Joined: Tue Jan 31, 2017 3:11 am
ACC won't discover my NAS
I have an AS204TE and have used control centre previously fine. Following the recent update, ACC won't find my NAS and all my mapped network drives are also inaccessible. Why is this?
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: ACC won't discover my NAS
I did not upgrade ACC on my PC for a long time. It is stilling working fine. I'm guessing that certain environment in your PC is changed. You should try to remove ACC, then re-install it.
-
- Posts: 7
- Joined: Mon Jan 02, 2017 4:25 am
Re: ACC won't discover my NAS
I had the same problem.
In my case it was Avast Business Antivirus Pro which blocked ACC from finding the NAS.
Turn off your antivirus and try again. If ACC then can see your NAS, look into adding an exception for ACC to your antivirus software.
In my case it was Avast Business Antivirus Pro which blocked ACC from finding the NAS.
Turn off your antivirus and try again. If ACC then can see your NAS, look into adding an exception for ACC to your antivirus software.
-
- Posts: 1
- Joined: Mon Feb 10, 2020 10:04 pm
Re: ACC won't discover my NAS
Had the same issue with Avast Pro. I turned it off and ACC scanned my AS5304T..
Andy
Andy
-
- Posts: 1
- Joined: Wed Jul 08, 2020 9:49 pm
Re: ACC won't discover my NAS
This is happening to me and I have exclusions created for my AV. I can connect fine through the web interface though. Is there any way of manually adding the device's IP to the ACC?
-
- Posts: 55
- Joined: Fri Nov 08, 2019 11:30 pm
Re: ACC won't discover my NAS
I had exactly the same problem. The NAS was accessible through the web interface but ACC did not see it. It turned out that my VPN client was blocking calls to port 8888. I now run the VPN client on my router (a much better solution anyway) and ACC works again.AdamC wrote:This is happening to me and I have exclusions created for my AV. I can connect fine through the web interface though. Is there any way of manually adding the device's IP to the ACC?