[NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

This is where you can find the latest ADM official release. Feel free to discuss any questions regarding it here.

Moderator: Lillian.W@AST

Post Reply
User avatar
shaileshjkumar
Posts: 15
youtube meble na wymiar Warszawa
Joined: Tue Dec 10, 2013 4:53 am

[NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by shaileshjkumar »

I have AS-608T with firmware 2.2.2RBB1 and some issues have started like info messages that the LCD is restarted continuously. I have been asked by support to upgrade the NAS to latest version and see if the problem persists.

I need the procedure to upgrade from 2.2.2RBB1 to the latest release.

Which version should be upgraded step wise so that nothing goes wrong.

I know I should backup my Data before upgrading, but I have 10TB of data and for backing up this huge a data, I wold have to buy another NAS. So I am going through the tedious copying to multiple HDDs. BUT I'll still request to tell me a smooth procedure so that I don't loose my Data and also get to the latest firmware.

Thanks in advance.
Asustor AS-608T (3GB RAM), ADM 2.2.2 RBB1 (8 x WD Red WD30EFRX 3TB, RAID 6) 16.9 TB!
DIY NAS Windows-10 64-Bit 8GB Ram 120GB SSD DriveBender (12 HDDs Multi Sizes) 16.9 TB!
DriveBender http://www.division-m.com/drivebender/
BloodyCactus
Posts: 10
Joined: Tue Mar 17, 2015 9:02 pm

Re: [NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by BloodyCactus »

having recently just done this, I went from 2.2 to 2.3.1 to 2.4.2 and there I stayed (I dont yet trust 2.5)
User avatar
shaileshjkumar
Posts: 15
Joined: Tue Dec 10, 2013 4:53 am

Re: [NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by shaileshjkumar »

Thanks for the reply.

I have 2.4.2 and 2.5.4, but not 2.3.1 can you give me a link where I can download 2.3.1 from.

Also, why don't you trust 2.5.4? I went through the forums and did not find any negative reviews about it.

Let me know.
Asustor AS-608T (3GB RAM), ADM 2.2.2 RBB1 (8 x WD Red WD30EFRX 3TB, RAID 6) 16.9 TB!
DIY NAS Windows-10 64-Bit 8GB Ram 120GB SSD DriveBender (12 HDDs Multi Sizes) 16.9 TB!
DriveBender http://www.division-m.com/drivebender/
MikeG.6.5
Posts: 917
Joined: Fri May 15, 2015 1:56 am

Re: [NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by MikeG.6.5 »

Some of the initial tests with 2.5.x were really not debugged well. It created a lot of problems for some people. 2.5.4 is stable, though, in the latest version. And so far I'm liking 2.6 but I've only been running it for a few days....
User avatar
shaileshjkumar
Posts: 15
Joined: Tue Dec 10, 2013 4:53 am

Re: [NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by shaileshjkumar »

So I can upgrade from 2.2.2 to 2.5.4 or I would have to do 2.2.2 to 2.4.2 and then 2.5.4?

Is there firmware in the middle which I am missing for e.g. 2.2.2 to 2.x.x to 2.4.2 and finally 2.5.4?

I just built a DIY NAS to backup the AS-608T to make sure if anything goes south I still have my data. Its doing the final stage and I would be upgrading today itself.

Thanks a ton in advance.
Asustor AS-608T (3GB RAM), ADM 2.2.2 RBB1 (8 x WD Red WD30EFRX 3TB, RAID 6) 16.9 TB!
DIY NAS Windows-10 64-Bit 8GB Ram 120GB SSD DriveBender (12 HDDs Multi Sizes) 16.9 TB!
DriveBender http://www.division-m.com/drivebender/
MikeG.6.5
Posts: 917
Joined: Fri May 15, 2015 1:56 am

Re: [NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by MikeG.6.5 »

Think you can go from 2.2 to 2.4 to 2.5, but Shawn may need to verify. I looked for over an hour last night for the link to the FTP site that used to be posted here. Couldn't find it. I wanted to give you the links for each file... Asked Shawn about it... Hopefully he'll pop in and answer some questions.
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: [NEED HELP] How to Upgrade from 2.2.2RBB1 to the latest Firmware release.

Post by orion »

There is a discussion related to yours: http://forum.asustor.com/viewtopic.php? ... 79&p=23279
I think you should upgrade to 2.4.2 first. However I don't know the anchor to download the firmware file. I thought asustor support guy should told you about it (it seems that you contacted to them before). You should ask them to give you the firmware file directly, or ask them to upgrade firmware for you remotely.
Post Reply

Return to “[Official] For AS-60X Series”