It is currently Tue Jun 25, 2019 11:59 am
All times are UTC + 8 hours

CEC Adaptor

Kodi (formally known as XBMC) is an award-winning free and open source (GPL) software media player and entertainment hub \

CEC Adaptor

Postby foggy69 » Wed Apr 12, 2017 4:07 am

After my AS6204T had been updated to run Kodi 17, my Pulse-Eight CEC Adaptor has stopped working.
I have tried uninstalling all the apps and then re-installing the latest versions, including the Media Pack
I still get the text box come up when Kodi starts stating that the Adaptor is connecting to the adaptor and the TV, but the remote does not work.
foggy69
 
Posts: 20
Joined: Thu Mar 09, 2017 7:46 pm

Re: CEC Adaptor

Postby orion » Wed Apr 12, 2017 1:59 pm

I cannot help because I don't own the adaptor. You should send a support request to asustor. https://support.asustor.com/
User avatar
orion
 
Posts: 2264
Joined: Wed May 29, 2013 11:09 am

Re: CEC Adaptor

Postby father.mande » Wed Apr 12, 2017 2:53 pm

Hi,
foggy69 wrote:After my AS6204T had been updated to run Kodi 17, my Pulse-Eight CEC Adaptor has stopped working.
I have tried uninstalling all the apps and then re-installing the latest versions, including the Media Pack
I still get the text box come up when Kodi starts stating that the Adaptor is connecting to the adaptor and the TV, but the remote does not work.


If (in complement or waiting for Asustor support) you want some advice, please provide kodi.log
... if Asustor don't compile it with "debug" option, you can add more info by changing advancedsettings.xml (Kodi wiki)
... in kodi.log you can obtain information
... also a good idea is to put here the result of dmesg command ... to verify that ADM recognize the Pule-Eight ... and map it correctly without error due to cdc_acm kernel module.

Sorry I can't run a test myself, I use my own kodi17 (mykodi17 17.1) ... canceled for other when Asustor out it's own version (no duplicate) ... so not the same context ...

Philippe.
AS5002T / AS202TE / AS1002T
APKG Download : https://www.father-mande.ovh/
In addition to this forum ; NOT to replace it
My Forum specific to my APKG : https://www.father-mande.ovh/phpBB3/
User avatar
father.mande
 
Posts: 685
Joined: Sat Sep 12, 2015 2:55 am

Re: CEC Adaptor

Postby foggy69 » Wed Apr 12, 2017 7:01 pm

A copy of the kodi.log is here
http://paste.ubuntu.com/24366453/

This is output from the dmesg command, I have removed the first 50 or so lines of the output to keep under the maximum number of characters allowed


Code: Select all
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17fffa000-0x17fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.000000]   node   0: [mem 0x0000000000070000-0x000000000008ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007a4befff]
[    0.000000]   node   0: [mem 0x000000007bfff000-0x000000007bffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1025102
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1160 pages reserved
[    0.000000]   DMA zone: 3982 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7763 pages used for memmap
[    0.000000]   DMA32 zone: 496832 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a4bf000-0x7aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7bfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bfbf000-0x7bffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7cbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7cc00000-0x7ebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ec00000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0x7ec00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff                                                 
ffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_nod                                                 
e_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88017fc00000 s86488 r8192 d322                                                 
96 u524288
[    0.000000] pcpu-alloc: s86488 r8192 d32296 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pag                                                 
es: 1007923
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/bzImage console=ttyS0,                                                 
115200n8 bootpart=2 uuid=84404f12-4e4c-44d2-b384-4b6c2752e1ba
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 3899008K/4100408K available (6490K kernel code, 634K rwda                                                 
ta, 3080K rodata, 872K init, 900K bss, 201400K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1599.938 MHz processor
[    0.000022] Calibrating delay loop (skipped), value calculated using timer fr                                                 
equency.. 3199.87 BogoMIPS (lpj=1599938)
[    0.010689] pid_max: default: 32768 minimum: 301
[    0.015341] ACPI: Core revision 20150930
[    0.040510] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.049348] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes                                                 
)
[    0.060255] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.069679] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.077677] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.086651] Initializing cgroup subsys io
[    0.091439] Initializing cgroup subsys memory
[    0.096650] Initializing cgroup subsys devices
[    0.101962] Initializing cgroup subsys freezer
[    0.107267] Initializing cgroup subsys net_cls
[    0.112571] Initializing cgroup subsys perf_event
[    0.118188] Initializing cgroup subsys net_prio
[    0.123593] Initializing cgroup subsys hugetlb
[    0.128893] CPU: Physical Processor ID: 0
[    0.133673] CPU: Processor Core ID: 0
[    0.138044] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.145180] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.158972] mce: CPU supports 6 MCE banks
[    0.163756] CPU0: Thermal monitoring enabled (TM1)
[    0.169451] process: using mwait in idle threads
[    0.174913] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.181311] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.189230] Freeing SMP alternatives memory: 20K (ffffffff81d7a000 - ffffffff                                                 
81d7f000)
[    0.207578] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.224292] TSC deadline timer enabled
[    0.224298] smpboot: CPU0: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (family:                                                 
0x6, model: 0x4c, stepping: 0x4)
[    0.235554] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, fu                                               
ll-width counters, Intel PMU driver.
[    0.247132] ... version:                3
[    0.251594] ... bit width:              40
[    0.256179] ... generic registers:      2
[    0.260668] ... value mask:             000000ffffffffff
[    0.266579] ... max period:             000000ffffffffff
[    0.272498] ... fixed-purpose events:   3
[    0.276979] ... event mask:             0000000700000003
[    0.283660] x86: Booting SMP configuration:
[    0.288341] .... node  #0, CPUs:      #1 #2 #3
[    0.316632] x86: Booted up 1 node, 4 CPUs
[    0.321343] smpboot: Total of 4 processors activated (12799.50 BogoMIPS)
[    0.329962] devtmpfs: initialized
[    0.343529] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096                                                 
bytes)
[    0.352168] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7bfbefff] (1782                                               
5792 bytes)
[    0.362029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                 
x_idle_ns: 1911260446275000 ns
[    0.373072] xor: measuring software checksum speed
[    0.387915]    prefetch64-sse:  5248.000 MB/sec
[    0.402967]    generic_sse:  4732.000 MB/sec
[    0.407731] xor: using function: prefetch64-sse (5248.000 MB/sec)
[    0.414806] RTC time: 10:05:55, date: 04/12/17
[    0.420233] NET: Registered protocol family 16
[    0.429197] cpuidle: using governor ladder
[    0.437798] cpuidle: using governor menu
[    0.442395] ACPI: bus type PCI registered
[    0.446982] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3                                                 
ffffff] (base 0xe0000000)
[    0.457347] PCI: not using MMCONFIG
[    0.461241] PCI: Using configuration type 1 for base access
[    0.491328] raid6: sse2x1   gen()   644 MB/s
[    0.512373] raid6: sse2x1   xor()  1539 MB/s
[    0.533501] raid6: sse2x2   gen()  1066 MB/s
[    0.554534] raid6: sse2x2   xor()  1837 MB/s
[    0.575640] raid6: sse2x4   gen()  1652 MB/s
[    0.596688] raid6: sse2x4   xor()  1687 MB/s
[    0.601451] raid6: using algorithm sse2x4 gen() 1652 MB/s
[    0.607479] raid6: .... xor() 1687 MB/s, rmw enabled
[    0.613026] raid6: using ssse3x2 recovery algorithm
[    0.618600] ACPI: Added _OSI(Module Device)
[    0.623258] ACPI: Added _OSI(Processor Device)
[    0.628247] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.633482] ACPI: Added _OSI(Processor Aggregator Device)
[    0.656705] ACPI: Dynamic OEM Table Load:
[    0.661260] ACPI: SSDT 0xFFFF88017A414000 000654 (v01 PmRef  Cpu0Ist  0000300                                                 0 INTL 20130117)
[    0.672619] ACPI: Dynamic OEM Table Load:
[    0.677199] ACPI: SSDT 0xFFFF88017A49B400 00015F (v01 PmRef  ApIst    0000300                                                 0 INTL 20130117)
[    0.689944] ACPI: Interpreter enabled
[    0.694111] ACPI: (supports S0 S3 S4 S5)
[    0.698469] ACPI: Using IOAPIC for interrupt routing
[    0.704089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3                                                 
ffffff] (base 0xe0000000)
[    0.716964] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI mot                                                 
herboard resources
[    0.726692] PCI: Using host bridge windows from ACPI; if necessary, use "pci=                                                 
nocrs" and report a bug
[    0.741558] ACPI: Power Resource [USBC] (on)
[    0.755413] ACPI: Power Resource [CLK0] (on)
[    0.760800] ACPI: Power Resource [CLK0] (on)
[    0.765677] ACPI: Power Resource [CLK1] (on)
[    0.776899] ACPI: Power Resource [ID3C] (off)
[    0.787798] ACPI: Power Resource [FN00] (off)
[    0.793938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.800829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S                                                 
egments MSI]
[    0.810056] \_SB_.PCI0:_OSC invalid UUID
[    0.810060] _OSC request data:1 1f 0
[    0.810070] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.817094] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0                                               
0-3f] only partially covers this bridge
[    0.829082] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0                                               
xdfffffff window]; [mem 0x80000000-0xdfffffff window] ignored
[    0.842993] PCI host bridge to bus 0000:00
[    0.847562] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.854458] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.862041] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.869613] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.877209] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win                                                 
dow]
[    0.885555] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win                                                 
dow]
[    0.893892] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff win                                                 
dow]
[    0.902231] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff win                                               
dow]
[    0.910577] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.916725] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.917089] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.917128] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.917146] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref                                                 
]
[    0.917158] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.917436] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.917517] pci 0000:00:13.0: reg 0x20: [io  0x3060-0x307f]
[    0.917532] pci 0000:00:13.0: reg 0x24: [mem 0x91614000-0x916147ff]
[    0.917589] pci 0000:00:13.0: PME# supported from D3hot
[    0.917820] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.917874] pci 0000:00:14.0: reg 0x10: [mem 0x91600000-0x9160ffff 64bit]
[    0.917971] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.918124] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.924546] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.924587] pci 0000:00:1a.0: reg 0x10: [mem 0x91500000-0x915fffff]
[    0.924602] pci 0000:00:1a.0: reg 0x14: [mem 0x91400000-0x914fffff]
[    0.924691] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.924988] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.925042] pci 0000:00:1b.0: reg 0x10: [mem 0x91610000-0x91613fff 64bit]
[    0.925146] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.925282] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.931689] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.931807] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.931932] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.938363] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.938479] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.938608] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.945010] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.945125] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.945255] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.951659] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[    0.951775] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.951899] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.958316] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.958658] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.958741] pci 0000:00:1f.3: reg 0x10: [mem 0x91615000-0x9161501f]
[    0.958861] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.959287] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    0.959336] pci 0000:01:00.0: reg 0x10: [io  0x2028-0x202f]
[    0.959355] pci 0000:01:00.0: reg 0x14: [io  0x2034-0x2037]
[    0.959374] pci 0000:01:00.0: reg 0x18: [io  0x2020-0x2027]
[    0.959392] pci 0000:01:00.0: reg 0x1c: [io  0x2030-0x2033]
[    0.959410] pci 0000:01:00.0: reg 0x20: [io  0x2000-0x201f]
[    0.959429] pci 0000:01:00.0: reg 0x24: [mem 0x91300000-0x913001ff]
[    0.959447] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.959574] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.967908] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.973462] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.973470] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.973593] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.973643] pci 0000:02:00.0: reg 0x10: [io  0x1028-0x102f]
[    0.973662] pci 0000:02:00.0: reg 0x14: [io  0x1034-0x1037]
[    0.973680] pci 0000:02:00.0: reg 0x18: [io  0x1020-0x1027]
[    0.973698] pci 0000:02:00.0: reg 0x1c: [io  0x1030-0x1033]
[    0.973717] pci 0000:02:00.0: reg 0x20: [io  0x1000-0x101f]
[    0.973735] pci 0000:02:00.0: reg 0x24: [mem 0x91200000-0x912001ff]
[    0.973755] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.973882] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.982202] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.987736] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.987744] pci 0000:00:1c.1:   bridge window [mem 0x91200000-0x912fffff]
[    0.987868] pci 0000:03:00.0: [14e4:16b1] type 00 class 0x020000
[    0.987950] pci 0000:03:00.0: reg 0x10: [mem 0x91110000-0x9111ffff 64bit pref                                               
]
[    0.987984] pci 0000:03:00.0: reg 0x18: [mem 0x91100000-0x9110ffff 64bit pref                                           
]
[    0.988046] pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.988171] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.988264] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.996628] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.002159] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff 64bi                                               
t pref]
[    1.002276] pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000
[    1.002358] pci 0000:04:00.0: reg 0x10: [mem 0x91010000-0x9101ffff 64bit pref                                               
]
[    1.002392] pci 0000:04:00.0: reg 0x18: [mem 0x91000000-0x9100ffff 64bit pref                                               
]
[    1.002454] pci 0000:04:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    1.002577] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    1.002674] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.011007] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.016538] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bi                                                 
t pref]
[    1.019457] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.027680] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.035831] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.044015] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.052186] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.060558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.068725] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.077157] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0,                                                 
disabled.
[    1.087823] ACPI: Enabled 6 GPEs in block 00 to 3F
[    1.093508] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.099797] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem                                                 ,locks=none
[    1.108790] vgaarb: loaded
[    1.111822] vgaarb: bridge control possible 0000:00:02.0
[    1.117889] SCSI subsystem initialized
[    1.122181] libata version 3.00 loaded.
[    1.122266] ACPI: bus type USB registered
[    1.126790] usbcore: registered new interface driver usbfs
[    1.132924] usbcore: registered new interface driver hub
[    1.138884] usbcore: registered new device driver usb
[    1.144616] pps_core: LinuxPPS API ver. 1 registered
[    1.150158] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                 
tti <giometti@linux.it>
[    1.160324] PTP clock support registered
[    1.165044] PCI: Using ACPI for IRQ routing
[    1.172294] PCI: pci_cache_line_size set to 64 bytes
[    1.172390] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    1.172395] e820: reserve RAM buffer [mem 0x7a4bf000-0x7bffffff]
[    1.172873] clocksource: Switched to clocksource refined-jiffies
[    1.179911] pnp: PnP ACPI init
[    1.183550] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.190138] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.196731] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.203340] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.204054] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active                                               
)
[    1.206672] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.206884] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.214663] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.222044] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.229427] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.236812] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.244205] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.251599] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    1.259380] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.266748] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.274143] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.274462] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.274788] pnp: PnP ACPI: found 5 devices
[    1.289206] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id                                               
le_ns: 2085701024 ns
[    1.299156] clocksource: Switched to clocksource acpi_pm
[    1.305189] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pr                                               
ef]: no compatible bridge window
[    1.316247] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pr                                                 
ef]: no compatible bridge window
[    1.327283] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pr                                               
ef]: no compatible bridge window
[    1.338366] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pr                                                 
ef]: no compatible bridge window
[    1.349479] pci 0000:00:1c.2: BAR 14: assigned [mem 0x91700000-0x917fffff]
[    1.357167] pci 0000:00:1c.3: BAR 14: assigned [mem 0x91800000-0x918fffff]
[    1.364876] pci 0000:01:00.0: BAR 6: assigned [mem 0x91310000-0x9131ffff pref                                               
]
[    1.372967] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.378557] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.385406] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x913fffff]
[    1.392998] pci 0000:02:00.0: BAR 6: assigned [mem 0x91210000-0x9121ffff pref                                               
]
[    1.401064] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.406637] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.413471] pci 0000:00:1c.1:   bridge window [mem 0x91200000-0x912fffff]
[    1.421079] pci 0000:03:00.0: BAR 6: assigned [mem 0x91700000-0x917007ff pref                                                 
]
[    1.429132] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.434697] pci 0000:00:1c.2:   bridge window [mem 0x91700000-0x917fffff]
[    1.442295] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff 64bi                                                 
t pref]
[    1.450925] pci 0000:04:00.0: BAR 6: assigned [mem 0x91800000-0x918007ff pref                                               
]
[    1.458986] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.464553] pci 0000:00:1c.3:   bridge window [mem 0x91800000-0x918fffff]
[    1.472136] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bi                                                 
t pref]
[    1.480823] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.480829] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.480834] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.480839] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.480845] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.480850] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.480855] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.480860] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.480865] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.480870] pci_bus 0000:01: resource 1 [mem 0x91300000-0x913fffff]
[    1.480875] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    1.480880] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    1.480885] pci_bus 0000:03: resource 1 [mem 0x91700000-0x917fffff]
[    1.480891] pci_bus 0000:03: resource 2 [mem 0x91100000-0x911fffff 64bit pref                                                 
]
[    1.480896] pci_bus 0000:04: resource 1 [mem 0x91800000-0x918fffff]
[    1.480901] pci_bus 0000:04: resource 2 [mem 0x91000000-0x910fffff 64bit pref                                               
]
[    1.480976] NET: Registered protocol family 2
[    1.486268] TCP established hash table entries: 32768 (order: 6, 262144 bytes                                                 
)
[    1.494533] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.502125] TCP: Hash tables configured (established 32768 bind 32768)
[    1.509509] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.516276] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.523604] NET: Registered protocol family 1
[    1.528528] pci 0000:00:02.0: Video device with shadowed ROM
[    1.530845] PCI: CLS 64 bytes, default 64
[    1.531032] Trying to unpack rootfs image as initramfs...
[    4.455490] Freeing initrd memory: 12916K (ffff8800366b6000 - ffff88003735300                                                 
0)
[    4.463743] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.471030] software IO TLB [mem 0x741f5000-0x781f5000] (64MB) mapped at [fff                                                 
f8800741f5000-ffff8800781f4fff]
[    4.482393] Scanning for low memory corruption every 60 seconds
[    4.490312] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    4.497538] audit: initializing netlink subsys (disabled)
[    4.503767] audit: type=2000 audit(1491991557.253:1): initialized
[    4.511585] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.523547] VFS: Disk quotas dquot_6.6.0
[    4.528243] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.537073] fuse init (API version 7.23)
[    4.545525] NET: Registered protocol family 38
[    4.550755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                 
50)
[    4.559352] io scheduler noop registered
[    4.563840] io scheduler deadline registered
[    4.568842] io scheduler cfq registered (default)
[    4.575330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.581748] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.589352] efifb: probing for efifb
[    4.593471] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, u                                               
sing 8128k, total 8128k
[    4.603938] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    4.610938] efifb: scrolling: redraw
[    4.615038] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.640678] Console: switching to colour frame buffer device 240x67
[    4.666756] fb0: EFI VGA frame buffer device
[    4.671875] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0                                                 
1/input/input0
[    4.681451] ACPI: Power Button [PWR2]
[    4.685768] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:0                                               
0/input/input1
[    4.695343] ACPI: Sleep Button [SLPB]
[    4.699687] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp                                               
ut2
[    4.708128] ACPI: Power Button [PWRF]
[    4.717579] thermal LNXTHERM:00: registered as thermal_zone0
[    4.723931] ACPI: Thermal Zone [TZ01] (27 C)
[    4.728947] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.757479] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a                                                 
16550A
[    4.787377] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a                                                 
16550A
[    4.800782] Linux agpgart interface v0.103
[    4.814313] brd: module loaded
[    4.821736] loop: module loaded
[    4.825459] ahci 0000:00:13.0: version 3.0
[    4.836239] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 imp                                               
l SATA mode
[    4.845192] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part de                                                 
so sadm sds apst
[    4.855504] scsi host0: ahci
[    4.859077] scsi host1: ahci
[    4.862415] ata1: SATA max UDMA/133 abar m2048@0x91614000 port 0x91614100 irq                                                 
115
[    4.870676] ata2: SATA max UDMA/133 abar m2048@0x91614000 port 0x91614180 irq                                               
115
[    4.879317] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    4.886667] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 imp                                               
l SATA mode
[    4.895591] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slu                                                 
m part ccc sxs
[    4.905747] scsi host2: ahci
[    4.909367] scsi host3: ahci
[    4.912703] ata3: SATA max UDMA/133 abar m512@0x91300000 port 0x91300100 irq                                                 
116
[    4.920867] ata4: SATA max UDMA/133 abar m512@0x91300000 port 0x91300180 irq                                                 
116
[    4.929340] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[    4.936693] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 imp                                                 
l SATA mode
[    4.945617] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slu                                                 
m part ccc sxs
[    4.955749] scsi host4: ahci
[    4.959335] scsi host5: ahci
[    4.962661] ata5: SATA max UDMA/133 abar m512@0x91200000 port 0x91200100 irq                                               
117
[    4.970831] ata6: SATA max UDMA/133 abar m512@0x91200000 port 0x91200180 irq                                                 
117
[    4.979348] tg3.c:v3.137 (May 11, 2014)
[    5.184285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.191276] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.198482] ata1.00: ATA-9: ST4000VN000-1H4168, SC43, max UDMA/133
[    5.205348] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.213631] ata2.00: ATA-9: ST4000VN000-1H4168, SC43, max UDMA/133
[    5.220472] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.229120] ata1.00: configured for UDMA/133
[    5.234283] ata3: SATA link down (SStatus 0 SControl 300)
[    5.234516] scsi 0:0:0:0: Direct-Access     ATA      ST4000VN000-1H41 SC43 PQ                                                 
: 0 ANSI: 5
[    5.235327] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.235360] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.                                               
64 TiB)
[    5.235363] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.235708] sd 0:0:0:0: [sda] Write Protect is off
[    5.235712] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.235890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                               
n't support DPO or FUA
[    5.240445] ata2.00: configured for UDMA/133
[    5.240901] scsi 1:0:0:0: Direct-Access     ATA      ST4000VN000-1H41 SC43 PQ                                                 
: 0 ANSI: 5
[    5.241532] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.                                                 
64 TiB)
[    5.241536] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    5.241569] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.241862] sd 1:0:0:0: [sdb] Write Protect is off
[    5.241867] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.242034] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                                               
n't support DPO or FUA
[    5.305337]  sda: sda1 sda2 sda3 sda4
[    5.319354]  sdb: sdb1 sdb2 sdb3 sdb4
[    5.440243] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.455702] ata5.00: ATA-10: ST8000VN0022-2EL112, SC61, max UDMA/133
[    5.462737] ata5.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), A                                                 
A
[    5.475573] ata5.00: configured for UDMA/133
[    5.491260] tsc: Refined TSC clocksource calibration: 1599.943 MHz
[    5.498101] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170fef16                                                 
c8e, max_idle_ns: 440795265101 ns
[    5.647274] ata4: SATA link down (SStatus 0 SControl 300)
[    5.653765] scsi 4:0:0:0: Direct-Access     ATA      ST8000VN0022-2EL SC61 PQ                                                 
: 0 ANSI: 5
[    5.663375] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    5.663412] sd 4:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7                                                 
.28 TiB)
[    5.663416] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[    5.663729] sd 4:0:0:0: [sdc] Write Protect is off
[    5.663734] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.663928] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, does                                                 
n't support DPO or FUA
[    5.712054] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.717221] asustor add disk dev sda
[    5.724028] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.729241] asustor add disk dev sdb
[    5.734330]  sdc: sdc1 sdc2 sdc3 sdc4
[    6.143041] sd 4:0:0:0: [sdc] Attached SCSI disk
[    6.148238] asustor add disk dev sdc
[    6.159262] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    6.182296] ata6.00: ATA-10: ST8000VN0022-2EL112, SC61, max UDMA/133
[    6.189333] ata6.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), A                                                 
A
[    6.220151] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PC                                                 
I Express) MAC address 10:bf:48:8e:2d:0d
[    6.231867] tg3 0000:03:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T E                                                 
thernet) (WireSpeed[1], EEE[1])
[    6.232077] ata6.00: configured for UDMA/133
[    6.232601] scsi 5:0:0:0: Direct-Access     ATA      ST8000VN0022-2EL SC61 PQ                                               
: 0 ANSI: 5
[    6.233132] sd 5:0:0:0: [sdd] 15628053168 512-byte logical blocks: (8.00 TB/7                                                 
.28 TiB)
[    6.233135] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[    6.233160] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    6.233507] sd 5:0:0:0: [sdd] Write Protect is off
[    6.233512] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    6.233644] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, does                                                 
n't support DPO or FUA
[    6.291963] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] T                                                 
SOcap[1]
[    6.300627] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    6.301314]  sdd: sdd1 sdd2 sdd3 sdd4
[    6.508469] clocksource: Switched to clocksource tsc
[    6.705741] sd 5:0:0:0: [sdd] Attached SCSI disk
[    6.710838] asustor add disk dev sdd
[    7.187478] tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PC                                               
I Express) MAC address 10:bf:48:8e:2d:0e
[    7.199152] tg3 0000:04:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T E                                               
thernet) (WireSpeed[1], EEE[1])
[    7.209966] tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] T                                               
SOcap[1]
[    7.218589] tg3 0000:04:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[    7.226120] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.233885] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.240265] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.246693] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.253316] usbcore: registered new interface driver catc
[    7.259384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.266583] ehci-pci: EHCI PCI platform driver
[    7.271508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.278331] ohci-pci: OHCI PCI platform driver
[    7.283266] uhci_hcd: USB Universal Host Controller Interface driver
[    7.290555] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.296430] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus numbe                                               
r 1
[    7.305759] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 qu                                                 
irks 0x00109810
[    7.315054] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    7.315378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.322862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                 
1
[    7.330817] usb usb1: Product: xHCI Host Controller
[    7.336198] usb usb1: Manufacturer: Linux 4.4.24 xhci-hcd
[    7.342145] usb usb1: SerialNumber: 0000:00:14.0
[    7.347543] hub 1-0:1.0: USB hub found
[    7.351728] hub 1-0:1.0: 7 ports detected
[    7.357846] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.363710] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus numbe                                                 
r 2
[    7.372124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    7.379610] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                 
1
[    7.387561] usb usb2: Product: xHCI Host Controller
[    7.392940] usb usb2: Manufacturer: Linux 4.4.24 xhci-hcd
[    7.398885] usb usb2: SerialNumber: 0000:00:14.0
[    7.404293] hub 2-0:1.0: USB hub found
[    7.408469] hub 2-0:1.0: 6 ports detected
[    7.414578] usbcore: registered new interface driver cdc_acm
[    7.420822] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                 
N adapters
[    7.429661] usbcore: registered new interface driver usblp
[    7.435753] usbcore: registered new interface driver usb-storage
[    7.442417] usbcore: registered new interface driver usbserial
[    7.448874] usbcore: registered new interface driver ftdi_sio
[    7.455236] usbserial: USB Serial support registered for FTDI USB Serial Devi                                                 
ce
[    7.463387] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    7.470963] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    7.479472] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.484965] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.490756] mousedev: PS/2 mouse device common for all mice
[    7.497480] rtc_cmos 00:04: RTC can wake from S4
[    7.502822] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    7.509590] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    7.516984] i2c /dev entries driver
[    7.521133] i801_smbus 0000:00:1f.3: SMBus using polling
[    7.527384] md: linear personality registered for level -1
[    7.533439] md: raid0 personality registered for level 0
[    7.539292] md: raid1 personality registered for level 1
[    7.545144] md: raid10 personality registered for level 10
[    7.551317] md: raid6 personality registered for level 6
[    7.557204] md: raid5 personality registered for level 5
[    7.563066] md: raid4 personality registered for level 4
[    7.569031] device-mapper: uevent: version 1.0.3
[    7.574314] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-d                                               
evel@redhat.com
[    7.583640] sdhci: Secure Digital Host Controller Interface driver
[    7.590445] sdhci: Copyright(c) Pierre Ossman
[    7.595299] EFI Variables Facility v0.08 2004-May-17
[    7.634369] pstore: Registered efi as persistent store backend
[    7.640867] hidraw: raw HID events driver (C) Jiri Kosina
[    7.647866] usbcore: registered new interface driver usbhid
[    7.654010] usbhid: USB HID core driver
[    7.658431] input: Unspecified device as /devices/virtual/input/input6
[    7.665794] Virtual Mouse Driver Initialized.
[    7.670775] arp_tables: (C) 2002 David S. Miller
[    7.676345] NET: Registered protocol family 10
[    7.681875] NET: Registered protocol family 17
[    7.686803] 8021q: 802.1Q VLAN Support v1.8
[    7.691451] Key type dns_resolver registered
[    7.696708] microcode: CPU0 sig=0x406c4, pf=0x1, revision=0x40a
[    7.703232] microcode: CPU1 sig=0x406c4, pf=0x1, revision=0x40a
[    7.709772] microcode: CPU2 sig=0x406c4, pf=0x1, revision=0x40a
[    7.716306] microcode: CPU3 sig=0x406c4, pf=0x1, revision=0x40a
[    7.722908] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.                                                 
co.uk>, Peter Oruba
[    7.732193] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    7.739820] SSE version of gcm_enc/dec engaged.
[    7.746100] registered taskstats version 1
[    7.751759] Btrfs loaded, debug=on
[    7.756364]   Magic number: 13:460:72
[    7.760645] console [netcon0] enabled
[    7.764691] netconsole: network logging started
[    7.769741] rtc_cmos 00:04: setting system clock to 2017-04-12 10:06:02 UTC (                                                 
1491991562)
[    7.780014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    7.786632] EDD information not available.
[    7.791250] PM: Hibernation image not present or could not be loaded.
[    7.794139] Freeing unused kernel memory: 872K (ffffffff81ca0000 - ffffffff81                                                 
d7a000)
[    7.802151] Write protecting the kernel read-only data: 12288k
[    7.809516] Freeing unused kernel memory: 1692K (ffff880001659000 - ffff88000                                                 
1800000)
[    7.827517] Freeing unused kernel memory: 1016K (ffff880001b02000 - ffff88000                                                 
1c00000)
[    7.899200] usb 1-1: New USB device found, idVendor=2548, idProduct=1002
[    7.906281] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.913723] usb 1-1: Product: USB-CEC Adapter
[    7.918330] usb 1-1: Manufacturer: Pulse-Eight
[    7.922955] usb 1-1: SerialNumber: v7
[    7.927000] usb 1-1: ep 0x83 - rounding interval to 1024 microframes, ep desc                                                 
says 2040 microframes
[    7.936497] usb 1-1: ep 0x84 - rounding interval to 1024 microframes, ep desc                                                 
says 2040 microframes
[    7.946428] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[    7.953987] input: Pulse-Eight USB-CEC Adapter as /devices/pci0000:00/0000:00                                                 
:14.0/usb1/1-1/1-1:1.2/0003:2548:1002.0001/input/input7
[    7.966787] hid-generic 0003:2548:1002.0001: input,hidraw0: USB HID v1.10 Mou                                                 
se [Pulse-Eight USB-CEC Adapter] on usb-0000:00:14.0-1/input2
[    8.134201] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    8.307574] usb 1-3: New USB device found, idVendor=125f, idProduct=601a
[    8.314558] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.322045] usb 1-3: Product: IUM01-512MFHL
[    8.326421] usb 1-3: Manufacturer: ADATA
[    8.330537] usb 1-3: SerialNumber: 120985741636000235
[    8.336014] usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc                                                 
says 255 microframes
[    8.345422] usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc s                                                 
ays 255 microframes
[    8.354963] usb-storage 1-3:1.0: USB Mass Storage device detected
[    8.361728] scsi host6: usb-storage 1-3:1.0
[    8.519213] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    8.690430] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[    8.697363] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    8.704798] usb 1-4: Product: USB 2.0 Hub [MTT]
[    8.710087] hub 1-4:1.0: USB hub found
[    8.714157] hub 1-4:1.0: 4 ports detected
[    9.370031] scsi 6:0:0:0: Direct-Access     ADATA    IUM01-512MFHL    0100 PQ                                               
: 0 ANSI: 0 CCS
[    9.379430] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    9.385152] sd 6:0:0:0: [sde] 1007616 512-byte logical blocks: (516 MB/492 Mi                                               
B)
[    9.393384] sd 6:0:0:0: [sde] Write Protect is off
[    9.398479] sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
[    9.399117] sd 6:0:0:0: [sde] No Caching mode page found
[    9.404686] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    9.419253]  sde: sde1 sde2 sde3
[    9.726386] sd 6:0:0:0: [sde] Attached SCSI removable disk
[    9.965704] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.044322] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.106889] random: dd: uninitialized urandom read (512 bytes read, 109 bits                                                 
of entropy available)
[   10.148275] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts:                                                 
(null)
[   10.203998] random: nonblocking pool is initialized
[   10.671713] md: md0 stopped.
[   10.676586] md: bind<sdb2>
[   10.679803] md: bind<sdc2>
[   10.683001] md: bind<sdd2>
[   10.686111] md: bind<sda2>
[   10.691055] md/raid1:md0: active with 4 out of 4 mirrors
[   10.696564] asustor add disk dev md0
[   10.696621] md0: detected capacity change from 0 to 2145386496
[   10.790546] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (                                                 
null)
[   10.872835] EXT4-fs (md0): re-mounted. Opts: (null)
[   11.083471] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[   11.108605] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts:                                                 
(null)
[   13.588796] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   13.595651] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[   13.602966] tg3 0000:03:00.0 eth0: EEE is enabled
[   13.608045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.286986] md: md126 stopped.
[   18.342379] md: bind<sdc3>
[   18.349403] md: bind<sdd3>
[   18.361224] md: bind<sdb3>
[   18.364532] md: bind<sda3>
[   18.374499] md/raid1:md126: active with 4 out of 4 mirrors
[   18.380200] asustor add disk dev md126
[   18.380261] md126: detected capacity change from 0 to 2145386496
[   18.460931] Adding 2095100k swap on /dev/md126.  Priority:-1 extents:1 across                                                 
:2095100k
[   18.507595] md: md1 stopped.
[   18.512372] md: bind<sdb4>
[   18.515633] md: bind<sdc4>
[   18.518789] md: bind<sdd4>
[   18.521906] md: bind<sda4>
[   18.531985] md/raid:md1: device sda4 operational as raid disk 0
[   18.538168] md/raid:md1: device sdd4 operational as raid disk 3
[   18.544343] md/raid:md1: device sdc4 operational as raid disk 2
[   18.550490] md/raid:md1: device sdb4 operational as raid disk 1
[   18.577442] md/raid:md1: allocated 139968kB
[   18.582634] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorit                                               
hm 2
[   18.590465] RAID conf printout:
[   18.590470]  --- level:5 rd:4 wd:4
[   18.590474]  disk 0, o:1, dev:sda4
[   18.590477]  disk 1, o:1, dev:sdb4
[   18.590480]  disk 2, o:1, dev:sdc4
[   18.590483]  disk 3, o:1, dev:sdd4
[   18.590514] asustor add disk dev md1
[   18.590565] md1: detected capacity change from 0 to 11988265598976
[   19.728149] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: u                                                 
srjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv1
[   19.751583] bridge: automatic filtering via arp/ip/ip6tables has been depreca                                               
ted. Update your scripts to load br_netfilter if you need this.
[   27.551566] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.563853] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   30.746738] [drm] Initialized drm 1.1.0 20060810
[   30.806890] [drm] Memory usable by graphics device = 2048M
[   30.812752] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[   30.812758] fb: switching to inteldrmfb from EFI VGA
[   30.818177] Console: switching to colour dummy device 80x25
[   30.832272] [drm] Replacing VGA console driver
[   30.837319] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   30.844327] [drm] Driver supports precise vblank timestamp query.
[   30.870500] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+me                                                 
m,decodes=io+mem:owns=io+mem
[   31.036270] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   31.044526] acpi device:2b: registered as cooling_device5
[   31.051609] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/L                                                 
NXVIDEO:00/input/input8
[   31.179604] fbcon: inteldrmfb (fb0) is primary device
[   31.542778] Console: switching to colour frame buffer device 240x67
[   31.587608] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   31.604702] intelfb: intelfb_init
[   31.604708] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/86                                                 
5G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[   31.616908] intelfb: Version 0.9.6
[   31.686762] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_co                                                 
mponent_bind_ops [i915])
[   31.714778] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line                                                 
_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[   31.726326] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0                                                 
/0x0/0x0)
[   31.734609] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0                                                 
/0x0)
[   31.742768] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   31.749540] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   31.755971] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   31.761628] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   31.768010] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   31.774552] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   31.781834] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[   31.820623] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0                                                 
/sound/card0/input9
[   31.831716] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.                                                 
0/sound/card0/input10
[   31.850877] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sou                                                 
nd/card0/input11
[   31.891486] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:0                                               
0:1b.0/sound/card0/input12
[   31.935170] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/000                                                 
0:00:1b.0/sound/card0/input13
[   31.977441] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00                                                 
:1b.0/sound/card0/input14
[   31.987605] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00                                               
:1b.0/sound/card0/input15
[   31.999397] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:                                                 
00:1b.0/sound/card0/input16
[   32.013633] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00                                                 
:1b.0/sound/card0/input17
[   32.024095] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00                                                 
:1b.0/sound/card0/input18
[   33.117170] iscsi-scst: ***WARNING***: CONFIG_TCP_ZERO_COPY_TRANSFER_COMPLETI                                                 
ON_NOTIFICATION not enabled in your kernel. ISCSI-SCST will be working with not                                                 
the best performance. Refer README file for details.
[   34.075372] usbip_core: USB/IP Core v1.0.0
[   34.088764] usbcore: registered new interface driver usbip-host
[   34.095248] usbip_host: USB/IP Host Driver v1.0.0
[   35.373942] cryptodev: driver 1.8 loaded.
[   39.811850] usbcore: registered new interface driver snd-usb-audio
>[   59.035472] udevd[5407]: starting version 3.2
>[   59.130965] udevd[5428]: starting eudev-3.2
root@Crusher:/volume1/.@root #


MODERATOR EDIT: Changed the logs to a code, so it's not a huge scrolling mass. Should be a bit easier to scroll to other replies in this thread. MikeG
foggy69
 
Posts: 20
Joined: Thu Mar 09, 2017 7:46 pm

Re: CEC Adaptor

Postby father.mande » Thu Apr 13, 2017 1:20 am

Hi,

Attach file ;.. it's better than copy on post ...
dmesg :
only the part regarding CEC adapter is need ... and all seem correct (but I can't know the version of module used by Asustor)
Kodi.log
error is clear ... response send by tv ... failed ...

So only support can run a debug on libcec4
... the change compare to kodi16 is the use of libcec4 vs libcec3 ... so if they work before ... lot of chance that problem come with lincec4 (mandatory for kodi17)

Philippe.
AS5002T / AS202TE / AS1002T
APKG Download : https://www.father-mande.ovh/
In addition to this forum ; NOT to replace it
My Forum specific to my APKG : https://www.father-mande.ovh/phpBB3/
User avatar
father.mande
 
Posts: 685
Joined: Sat Sep 12, 2015 2:55 am

Re: CEC Adaptor

Postby foggy69 » Thu Apr 13, 2017 6:27 pm

Thank you for your help Philippe.

After more testing, I found that the CEC adaptor would work in all HDMI sockets on my Panasonic TV using Kodi 16.
Using Kodi 17, it would only work with the HDMI 1 socket. No settings no the TV were changed.
foggy69
 
Posts: 20
Joined: Thu Mar 09, 2017 7:46 pm

Re: CEC Adaptor

Postby father.mande » Thu Apr 13, 2017 7:20 pm

Hi,
foggy69 wrote:Thank you for your help Philippe.
After more testing, I found that the CEC adaptor would work in all HDMI sockets on my Panasonic TV using Kodi 16.
Using Kodi 17, it would only work with the HDMI 1 socket. No settings no the TV were changed.


Is your HDMI 1 is the HDMI with ARC support ? (just for my information to check change in libcec4)
or if this entry are something special ? (DVI compatible, etc.)
or reverse if 2,3 and up to number of HDMI entry ... have somethings added or restricted versus HDMI 1

Philippe.
NB nothing urgent ... only if I can return information to kodi team or libcec dev.
AS5002T / AS202TE / AS1002T
APKG Download : https://www.father-mande.ovh/
In addition to this forum ; NOT to replace it
My Forum specific to my APKG : https://www.father-mande.ovh/phpBB3/
User avatar
father.mande
 
Posts: 685
Joined: Sat Sep 12, 2015 2:55 am

Re: CEC Adaptor

Postby foggy69 » Tue Apr 18, 2017 10:42 pm

The TV is a Panasonic TX-L37D25.
According to the manual, the only difference between HDMI connections is that HDMI 2 has the Audio Return Channel. HDMI 1 is recomended to be connected to a Cable/Set Top Box, but gives no reason why.
Otherwise, the specifications for HDMI 1 to 4 are Version 1.4 with Content Type, and 1.3a with Deep Colour. The TV supports HDAVI Control 5 function.
DVI connections can be made to all HDMI connections.
foggy69
 
Posts: 20
Joined: Thu Mar 09, 2017 7:46 pm

Re: CEC Adaptor

Postby foggy69 » Wed Apr 19, 2017 8:24 pm

Now I have got the CEC adaptor working under Kodi 17, it has bought up another problem that did not exist with Kodi 16

When using my Panasonic TV remote, pressing any button will sometimes send the command twice. It appears that it is an old problem with a fix listed on this website.

https://github.com/chbmuc/xbmc/commit/6e5822d#diff-5438535e55ccf7e8181128c8cf3a38e2

I am new to Linux and have been searching using putty and filezilla for the folder mentioned, or any peripheral folder in the kodi folders without success, can anybody point me in the right direction

Here is a kodi log of the issue
http://paste.ubuntu.com/24412895/
foggy69
 
Posts: 20
Joined: Thu Mar 09, 2017 7:46 pm

Re: CEC Adaptor

Postby father.mande » Thu Apr 20, 2017 12:10 am

Hi,

As I know ... no setting exist for this (time-stamp for key pressed)

The post (2014) you put as reference is for old (all is relative) kodi version with libcec.3 ... Kodi17 use now libcec.4
AND it's not in the official Xbmc github but in a fork ...
AND at all even it's possible to add this ... it's in the source code ... so only Asustor (call support) can do it ... kodi is open source BUT Asustor don't provide full environment and shell to rebuild it yourself (one reason for my own port before)

You can also post on Kodi forum directly and why not open a bug ... so you can have a response ... to send after to Asustor developer ...
if it's not you that post this ... a reported bug exist seem on the same problem Panasonic libcec repeat key on kodi 17.0 :
http://trac.kodi.tv/ticket/17409

Philippe.
AS5002T / AS202TE / AS1002T
APKG Download : https://www.father-mande.ovh/
In addition to this forum ; NOT to replace it
My Forum specific to my APKG : https://www.father-mande.ovh/phpBB3/
User avatar
father.mande
 
Posts: 685
Joined: Sat Sep 12, 2015 2:55 am

Next

Return to Kodi

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 1 guest