How remove harddrives?

[sonicfifi75]

Hi all

My issue. How remove extra drives?

My NAS AS5104T (latest ADM)
Run 2x wd reds in raid0 and added 2x SSD to try cache...

I disabled the Volume1 cache and SSD was written to HDD..i slide both SSD out and all looks cool...until reboot

Then NAS startsup and asks me if i want init NAS..other option is powerdown..

If i put those 2x SSD back in and reboot ... NAS boots up fine...

2x SSD are inactive in ADM... what is happening here??????

As test..tried couple times.. 1 SSD is out.. but no luck with the last SSD...So if i want bootable system..i need have SSD (inactive) or no boot...

it Must be a bug..or I've totally missed something

Thanks in advance

[Nazar78]

Definitely looks like a bug, suggest you open a ticket https://support.asustor.com/.

[sonicfifi75]

Definitely looks like a bug, suggest you open a ticket https://support.asustor.com/.

Ticket created. Lets see

I have also Qnap and 2x Buffalo NAS.. never experienced that on them

And WD reds are overrrated or yet another bug in adm. Last week the NAS reported Pendings Sectors.. Took drives out , put in a PC (SMART reported all good - no pending sectors etc), reformat and back in Asustor..no issues since. When looking back..seems like ADM bug, but i was crazy listening to beeeep sounds

btw Cache is fine on NAS, but atm my issues is my gigalan. I max my lan on workstations, even without LAG. My switches can LAG, but workstation dont lol. Beeing not the youngest dude, i recall running Doom on coax LAN from DOS.. In my wildest dreams, i could not predict that LAN cables/cards would be bottleneck

[sonicfifi75]

Update

ADM 3.5.2.RAG2 might be issue... I recall prev verion ADM i ran 1x SSD and removed without notice anything. As we speak, new ADM..i try update and put 2xSSD again