i'm very satisfied with my AS5004T and now i spent two weeks with USB tuner Evolveo Mars ( ITE 9135 ) , dongle is reported by Looksgood "IT9135 BDA Afatech DVB-T ) . Everything working fine , but NO EPG data . It's empty and i cannot schedule recording.
My version of ADM is 2.6.5.R9N1 . Without DVBlink SW tuner not detected , with installed SW from DVBlink is OK in app and i can live stream .
Dmesg command :
When i try refresh EPG guide i produce in "EpgGrabber.log" this :[28975.630977] usb 1-2: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[28975.639400] usb 1-2: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
[28975.647988] usb 1-2: dvb_usb_af9035: [0] overriding tuner from 00 to 60
[28975.658446] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[28975.667987] DVB: registering new adapter (ITE 9135(9006) Generic)
[28975.747154] usb 1-2: media controller created
[28975.800826] dvb_register_media_device: media device 'dvb-demux' registered.
[28975.802078] dvb_register_media_device: media device 'dvb-dvr' registered.
[28975.802297] dvb_register_media_device: media device 'dvb-net' registered.
[28975.829491] af9033 8-0038: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[28975.836558] af9033 8-0038: Afatech AF9033 successfully attached
[28975.842695] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[28975.938441] dvb_register_media_device: media device 'Afatech AF9033 (DVB-T)' registered.
[28975.946970] it913x 8-001c: ITE IT913X BX successfully attached
[28976.013566] IR keymap rc-it913x-v1 not found
[28976.017948] Registered IR keymap rc-empty
[28976.030466] input: ITE 9135(9006) Generic as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc0/input24
[28976.051604] rc0: ITE 9135(9006) Generic as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc0
[28976.060256] usb 1-2: dvb_usb_v2: 'ITE 9135(9006) Generic' successfully initialized and connected
I think there is problem and i don't know whats wrong . Anybody from other users or dev team help me ?ersion: 5.10 FE_CAN { DVB-T }
tuning to 570000000 Hz
video pid 0x0101, audio pid 0x0111
status 00 | signal 6147 | snr 0000 | ber 00000000 | unc 00000000 |
No [cst]zap channels.conf to produce channel info
iconv_open() failed: Invalid argument
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
With best regards
Michal