Have been few weeks with the Nimbustor4, 8gb ram, 40tb n300 raid10. Two things I noticed is that:
1. The Asustor portal reaction is lagging on the auto UHD resolution (auto 3840x2160@60fps, my TV supports up to 4K@60fps). Like clicking on next page or open settings, there's a 1-2 seconds delay. It's perfectly fine on FHD@120fps. But as soon as I increase the resolution a step higher, the lag gets obvious. Edited, I'm also using a HDMI 2.0 (HS with Ethernet) cable and the latest ADM 3.4.1.R7Q6. Saw this in dmesg while changing to any resolution:
Code: Select all
2019-08-08T02:31:47.933155+08:00 Nimbustor4 kernel: [48887.771343] [drm:drm_scdc_set_high_tmds_clock_ratio [drm_kms_helper]] *ERROR* Failed to read tmds config, err=-6
2019-08-08T02:31:47.933194+08:00 Nimbustor4 kernel: [48887.771389] [drm:intel_hdmi_handle_sink_scrambling [i915]] *ERROR* Set TMDS ratio failed
2019-08-08T02:31:50.044170+08:00 Nimbustor4 kernel: [48889.882333] [drm:drm_scdc_set_high_tmds_clock_ratio [drm_kms_helper]] *ERROR* Failed to read tmds config, err=-6
2019-08-08T02:31:50.044223+08:00 Nimbustor4 kernel: [48889.882380] [drm:intel_hdmi_handle_sink_scrambling [i915]] *ERROR* Set TMDS ratio failed
2019-08-08T02:31:52.171128+08:00 Nimbustor4 kernel: [48892.008671] [drm:drm_scdc_set_high_tmds_clock_ratio [drm_kms_helper]] *ERROR* Failed to read tmds config, err=-6
2019-08-08T02:31:52.171163+08:00 Nimbustor4 kernel: [48892.008718] [drm:intel_hdmi_handle_sink_scrambling [i915]] *ERROR* Set TMDS ratio failed
2019-08-08T02:31:54.276179+08:00 Nimbustor4 kernel: [48894.114428] [drm:drm_scdc_set_high_tmds_clock_ratio [drm_kms_helper]] *ERROR* Failed to read tmds config, err=-6
2019-08-08T02:31:54.276235+08:00 Nimbustor4 kernel: [48894.114474] [drm:intel_hdmi_handle_sink_scrambling [i915]] *ERROR* Set TMDS ratio failed
Are the above normal? Thanks in advance.