Page 1 of 1
Download error
Posted: Thu Dec 19, 2013 7:09 pm
by Caktuz
All my files are downloaded and works fine but it get this error every time a download is finished.
- Download failure.JPG (28.12 KiB) Viewed 11159 times
Re: Download failure error
Posted: Sat Dec 21, 2013 9:24 am
by clinton.hall
if you click on this download, it should show what worked and what didn't/// most probably you have a pp script that failed?
can you show that screenshot?
Re: Download failure error
Posted: Mon Dec 23, 2013 7:29 pm
by Caktuz
Thank you for your reply
It seems that it's the par checking that fails..
- error 2.JPG (204.62 KiB) Viewed 11130 times
- error.JPG (38.3 KiB) Viewed 11130 times
Re: Download failure error
Posted: Tue Dec 24, 2013 3:09 pm
by clinton.hall
ok... can you confirm what settings you have for nzbget par check/repair?
Have you actually set up email.py postprocess script? if not, just remove this from the list of postprocess scripts for each category... otherwise the download will always show as "failed" because the email script has failed.
I am certainly more concerned about the par failure than the email.py failure... have you tried a manual par check of this download? it could be that the download itself did fail (the par check failed and it can't be repaired...)
Re: Download failure error
Posted: Sun Dec 29, 2013 3:52 am
by Caktuz
All files are downloaded and extracted correctly. I have also tested it with parbuddy and everything seems ok.
Here are the settings:
PAR CHECK/REPAIR
Parcheck: Auto
Parrepair: Yes
Parscan: Auto
StrictParName: No
ParTimeLimit: 0min
ParPauseQueue: Yes
ParCleanupQueue: Yes
NzbCleanupDisk: No
ExtCleanupDisk: .par2, .sfv, _brokenlog.txt
POST-PROCESSING SCRIPTS
DefScript: nzbToMedia/DeleteSamples.py
ScriptOrder: nzbToMedia/DeleteSamples.py, nzbToMedia/nzbToMedia.py, nzbToMedia/nzbToSickBeard.py, nzbToMedia/nzbToCouchPotato.py, nzbToMedia/nzbToHeadPhones.py, nzbToMedia/nzbToGamez.py, nzbToMedia/nzbToMylar.py, Logger.py
ScriptPauseQueue: Yes