SickBeard to SickRage postprocessing?

Sick Beard is a PVR for newsgroup users (with limited torrent support). It watches for new episodes of your favorite shows and when they are posted it downloads them, sorts and renames them, and optionally generates metadata for them. It currently supports NZBs.org, NZBMatrix, NZBs'R'Us, Newzbin, Womble's Index, NZB.su, TVTorrents and EZRSS and retrieves show information from theTVDB.com and TVRage.com.

Moderator: Lillian.W@AST

McGurik
Posts: 22
youtube meble na wymiar Warszawa
Joined: Sat Apr 26, 2014 2:30 pm

SickBeard to SickRage postprocessing?

Post by McGurik »

So I am trying to switch from SickBeard to SickRage but I am having difficulty in calling the proper script. When using SickBeard I used nzbToSickbeard.py but trying to switch to SickRage I get an error that SickBeard is not running and it stops the script. This is obvious to me because I shutdown SickBeard to run SickRage. My question, after I searched around on the 'net, is which script should I be using with SickRage? I have tried nzbToMedia.py and autoProcessTV.py without success.

Thanks
User avatar
clinton.hall
Posts: 845
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand
Contact:

Re: SickBeard to SickRage postprocessing?

Post by clinton.hall »

use nzbToSickBeard, but edit the autoProcessMedia.cfg to change the [SockBeard] host and port to the new SickRage host and port...
Also make sure you set "fork = auto"
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
McGurik
Posts: 22
Joined: Sat Apr 26, 2014 2:30 pm

Re: SickBeard to SickRage postprocessing?

Post by McGurik »

You are correct as usual. I should have thought of that but appreciate the prompt reply. Can you help me setup postprocessing for anime? I assume I have to make a [anime] section. Can I just copy and paste the same sickrage info as I would for [tv]?
User avatar
clinton.hall
Posts: 845
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand
Contact:

Re: SickBeard to SickRage postprocessing?

Post by clinton.hall »

Bingo...
Just copy [[tv]] to [[anime]] and then edit any options as needed.
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
McGurik
Posts: 22
Joined: Sat Apr 26, 2014 2:30 pm

Re: SickBeard to SickRage postprocessing?

Post by McGurik »

So I must have made an error because now I get an error with every file I post process.

[19:09:47] [ERROR]::MAIN: Unable to migrate config file /volume1/.@plugins/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/autoProcessMedia.cfg, exiting ...
Exception AttributeError: "'NoneType' object has no attribute 'path'" in <bound method PosixProcess.__del__ of <nzbtomedia.nzbToMediaUtil.PosixProcess instance at 0x2645050>> ignored


What do I need to change?
User avatar
clinton.hall
Posts: 845
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand
Contact:

Re: SickBeard to SickRage postprocessing?

Post by clinton.hall »

Can you send me your autoProcessMedia.cfg file?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
McGurik
Posts: 22
Joined: Sat Apr 26, 2014 2:30 pm

Re: SickBeard to SickRage postprocessing?

Post by McGurik »

Hey so we discussed to autoProcessMedia.cfg file but now I get an error about 50% of the time.

"[18:54:33] [ERROR]::MAIN: A problem was reported in the /usr/local/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/nzbToSickBeard.py script.
SickBeard: Failed to post-process - Server returned status 500!"

Is there another error in the file that I am missing?
User avatar
clinton.hall
Posts: 845
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand
Contact:

Re: SickBeard to SickRage postprocessing?

Post by clinton.hall »

Can you post the whole log from that postprocess event so I can see everything that lead to that point?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
McGurik
Posts: 22
Joined: Sat Apr 26, 2014 2:30 pm

Re: SickBeard to SickRage postprocessing?

Post by McGurik »

Sorry here is the whole script...

[18:53:41] [INFO]::MAIN: Loading config from [/volume1/.@plugins/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/autoProcessMedia.cfg]
[18:53:41] [INFO]::MAIN: Checking database structure...
[18:53:41] [INFO]::MAIN: Checking if git needs an update
[18:53:41] [INFO]::MAIN: No update needed
[18:53:41] [INFO]::MAIN: nzbToMedia Version:77da142216ba6dc91bb654635d4bd03f13c881e5 Branch:master (Linux 3.12.20)
[18:53:41] [INFO]::MAIN: #########################################################
[18:53:41] [INFO]::MAIN: ## ..::[nzbToMedia.pyc]::.. ##
[18:53:41] [INFO]::MAIN: #########################################################
[18:53:41] [INFO]::MAIN: Script triggered from SABnzbd
[18:53:41] [ERROR]::MAIN: Unable to open URL
[18:53:42] [INFO]::MAIN: Auto-detected SECTION:SickBeard
[18:53:42] [INFO]::MAIN: Calling SickBeard:tv to post-process:The.Goldbergs.2013.S02E14.720p.HDTV.X264-DIMENSION.nzb
[18:53:43] [INFO]::MAIN: Attempting to auto-detect tv fork
[18:53:43] [INFO]::MAIN: SickBeard:tv fork auto-detection found custom params {'force': None, 'dir': None, 'process_method': None}
[18:53:43] [INFO]::MAIN: SickBeard:tv fork set to custom
[18:53:43] [INFO]::TRANSCODER: Checking [The Goldbergs 2013 - S02E14 - 720p HDTV X264-DIMENSION.mkv] for corruption, please stand by ...
[18:53:43] [INFO]::TRANSCODER: SUCCESS: [The Goldbergs 2013 - S02E14 - 720p HDTV X264-DIMENSION.mkv] has no corruption.
[18:53:53] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/The Goldbergs 2013/Season 2
[18:53:53] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/The Goldbergs 2013/Season 2
[18:53:53] [POSTPROCESS]::SICKBEARD: SUCCESS: The download succeeded, sending a post-process request
[18:54:33] [ERROR]::SICKBEARD: Server returned status 500
[18:54:33] [ERROR]::MAIN: A problem was reported in the /usr/local/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/nzbToSickBeard.py script.
SickBeard: Failed to post-process - Server returned status 500!
User avatar
clinton.hall
Posts: 845
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand
Contact:

Re: SickBeard to SickRage postprocessing?

Post by clinton.hall »

can you edit autoProcessMedia.cfg [General] and set log_debug = 1
this should add more details to the postprocess log.

Also, can you check the sickrage logs from the same time 18:53 to see if it says what the error was?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
Post Reply

Return to “SickBeard”