So I am trying to switch from SickBeard to SickRage but I am having difficulty in calling the proper script. When using SickBeard I used nzbToSickbeard.py but trying to switch to SickRage I get an error that SickBeard is not running and it stops the script. This is obvious to me because I shutdown SickBeard to run SickRage. My question, after I searched around on the 'net, is which script should I be using with SickRage? I have tried nzbToMedia.py and autoProcessTV.py without success.
Thanks
SickBeard to SickRage postprocessing?
-
- Posts: 22
- youtube meble na wymiar Warszawa
- Joined: Sat Apr 26, 2014 2:30 pm
- clinton.hall
- Posts: 845
- Joined: Thu May 09, 2013 7:01 pm
- Location: New Zealand
- Contact:
Re: SickBeard to SickRage postprocessing?
use nzbToSickBeard, but edit the autoProcessMedia.cfg to change the [SockBeard] host and port to the new SickRage host and port...
Also make sure you set "fork = auto"
Also make sure you set "fork = auto"
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
-
- Posts: 22
- Joined: Sat Apr 26, 2014 2:30 pm
Re: SickBeard to SickRage postprocessing?
You are correct as usual. I should have thought of that but appreciate the prompt reply. Can you help me setup postprocessing for anime? I assume I have to make a [anime] section. Can I just copy and paste the same sickrage info as I would for [tv]?
- clinton.hall
- Posts: 845
- Joined: Thu May 09, 2013 7:01 pm
- Location: New Zealand
- Contact:
Re: SickBeard to SickRage postprocessing?
Bingo...
Just copy [[tv]] to [[anime]] and then edit any options as needed.
Just copy [[tv]] to [[anime]] and then edit any options as needed.
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
-
- Posts: 22
- Joined: Sat Apr 26, 2014 2:30 pm
Re: SickBeard to SickRage postprocessing?
So I must have made an error because now I get an error with every file I post process.
[19:09:47] [ERROR]::MAIN: Unable to migrate config file /volume1/.@plugins/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/autoProcessMedia.cfg, exiting ...
Exception AttributeError: "'NoneType' object has no attribute 'path'" in <bound method PosixProcess.__del__ of <nzbtomedia.nzbToMediaUtil.PosixProcess instance at 0x2645050>> ignored
What do I need to change?
[19:09:47] [ERROR]::MAIN: Unable to migrate config file /volume1/.@plugins/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/autoProcessMedia.cfg, exiting ...
Exception AttributeError: "'NoneType' object has no attribute 'path'" in <bound method PosixProcess.__del__ of <nzbtomedia.nzbToMediaUtil.PosixProcess instance at 0x2645050>> ignored
What do I need to change?
- clinton.hall
- Posts: 845
- Joined: Thu May 09, 2013 7:01 pm
- Location: New Zealand
- Contact:
Re: SickBeard to SickRage postprocessing?
Can you send me your autoProcessMedia.cfg file?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
-
- Posts: 22
- Joined: Sat Apr 26, 2014 2:30 pm
Re: SickBeard to SickRage postprocessing?
Hey so we discussed to autoProcessMedia.cfg file but now I get an error about 50% of the time.
"[18:54:33] [ERROR]::MAIN: A problem was reported in the /usr/local/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/nzbToSickBeard.py script.
SickBeard: Failed to post-process - Server returned status 500!"
Is there another error in the file that I am missing?
"[18:54:33] [ERROR]::MAIN: A problem was reported in the /usr/local/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/nzbToSickBeard.py script.
SickBeard: Failed to post-process - Server returned status 500!"
Is there another error in the file that I am missing?
- clinton.hall
- Posts: 845
- Joined: Thu May 09, 2013 7:01 pm
- Location: New Zealand
- Contact:
Re: SickBeard to SickRage postprocessing?
Can you post the whole log from that postprocess event so I can see everything that lead to that point?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
-
- Posts: 22
- Joined: Sat Apr 26, 2014 2:30 pm
Re: SickBeard to SickRage postprocessing?
Sorry here is the whole script...
[18:53:41] [INFO]::MAIN: Loading config from [/volume1/.@plugins/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/autoProcessMedia.cfg]
[18:53:41] [INFO]::MAIN: Checking database structure...
[18:53:41] [INFO]::MAIN: Checking if git needs an update
[18:53:41] [INFO]::MAIN: No update needed
[18:53:41] [INFO]::MAIN: nzbToMedia Version:77da142216ba6dc91bb654635d4bd03f13c881e5 Branch:master (Linux 3.12.20)
[18:53:41] [INFO]::MAIN: #########################################################
[18:53:41] [INFO]::MAIN: ## ..::[nzbToMedia.pyc]::.. ##
[18:53:41] [INFO]::MAIN: #########################################################
[18:53:41] [INFO]::MAIN: Script triggered from SABnzbd
[18:53:41] [ERROR]::MAIN: Unable to open URL
[18:53:42] [INFO]::MAIN: Auto-detected SECTION:SickBeard
[18:53:42] [INFO]::MAIN: Calling SickBeard:tv to post-process:The.Goldbergs.2013.S02E14.720p.HDTV.X264-DIMENSION.nzb
[18:53:43] [INFO]::MAIN: Attempting to auto-detect tv fork
[18:53:43] [INFO]::MAIN: SickBeard:tv fork auto-detection found custom params {'force': None, 'dir': None, 'process_method': None}
[18:53:43] [INFO]::MAIN: SickBeard:tv fork set to custom
[18:53:43] [INFO]::TRANSCODER: Checking [The Goldbergs 2013 - S02E14 - 720p HDTV X264-DIMENSION.mkv] for corruption, please stand by ...
[18:53:43] [INFO]::TRANSCODER: SUCCESS: [The Goldbergs 2013 - S02E14 - 720p HDTV X264-DIMENSION.mkv] has no corruption.
[18:53:53] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/The Goldbergs 2013/Season 2
[18:53:53] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/The Goldbergs 2013/Season 2
[18:53:53] [POSTPROCESS]::SICKBEARD: SUCCESS: The download succeeded, sending a post-process request
[18:54:33] [ERROR]::SICKBEARD: Server returned status 500
[18:54:33] [ERROR]::MAIN: A problem was reported in the /usr/local/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/nzbToSickBeard.py script.
SickBeard: Failed to post-process - Server returned status 500!
[18:53:41] [INFO]::MAIN: Loading config from [/volume1/.@plugins/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/autoProcessMedia.cfg]
[18:53:41] [INFO]::MAIN: Checking database structure...
[18:53:41] [INFO]::MAIN: Checking if git needs an update
[18:53:41] [INFO]::MAIN: No update needed
[18:53:41] [INFO]::MAIN: nzbToMedia Version:77da142216ba6dc91bb654635d4bd03f13c881e5 Branch:master (Linux 3.12.20)
[18:53:41] [INFO]::MAIN: #########################################################
[18:53:41] [INFO]::MAIN: ## ..::[nzbToMedia.pyc]::.. ##
[18:53:41] [INFO]::MAIN: #########################################################
[18:53:41] [INFO]::MAIN: Script triggered from SABnzbd
[18:53:41] [ERROR]::MAIN: Unable to open URL
[18:53:42] [INFO]::MAIN: Auto-detected SECTION:SickBeard
[18:53:42] [INFO]::MAIN: Calling SickBeard:tv to post-process:The.Goldbergs.2013.S02E14.720p.HDTV.X264-DIMENSION.nzb
[18:53:43] [INFO]::MAIN: Attempting to auto-detect tv fork
[18:53:43] [INFO]::MAIN: SickBeard:tv fork auto-detection found custom params {'force': None, 'dir': None, 'process_method': None}
[18:53:43] [INFO]::MAIN: SickBeard:tv fork set to custom
[18:53:43] [INFO]::TRANSCODER: Checking [The Goldbergs 2013 - S02E14 - 720p HDTV X264-DIMENSION.mkv] for corruption, please stand by ...
[18:53:43] [INFO]::TRANSCODER: SUCCESS: [The Goldbergs 2013 - S02E14 - 720p HDTV X264-DIMENSION.mkv] has no corruption.
[18:53:53] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/The Goldbergs 2013/Season 2
[18:53:53] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/The Goldbergs 2013/Season 2
[18:53:53] [POSTPROCESS]::SICKBEARD: SUCCESS: The download succeeded, sending a post-process request
[18:54:33] [ERROR]::SICKBEARD: Server returned status 500
[18:54:33] [ERROR]::MAIN: A problem was reported in the /usr/local/AppCentral/sickbeard/SickBeard/autoProcessTV/nzbToMedia/nzbToSickBeard.py script.
SickBeard: Failed to post-process - Server returned status 500!
- clinton.hall
- Posts: 845
- Joined: Thu May 09, 2013 7:01 pm
- Location: New Zealand
- Contact:
Re: SickBeard to SickRage postprocessing?
can you edit autoProcessMedia.cfg [General] and set log_debug = 1
this should add more details to the postprocess log.
Also, can you check the sickrage logs from the same time 18:53 to see if it says what the error was?
this should add more details to the postprocess log.
Also, can you check the sickrage logs from the same time 18:53 to see if it says what the error was?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index