Hi
Im using SB on Asustor AS-604t NAS.
I've enabled the HTTPS from the SB settings->General and restarted the service.
However now, when I click on the Sickbeard icon in order to go the web page I get the following error:
The client sent a plain HTTP request, but this server only speaks HTTPS on this port.
Is there a way to start SB with HTTPS enabled from the ADM?
Cannot start the SB on HTTPS
-
- Posts: 98
- youtube meble na wymiar Warszawa
- Joined: Wed Feb 19, 2014 3:26 am
- clinton.hall
- Posts: 845
- Joined: Thu May 09, 2013 7:01 pm
- Location: New Zealand
- Contact:
Re: Cannot start the SB on HTTPS
SB is "started" when the App is enabled, however the icon itself points to the default http url. To change the icon itself would be rather difficult, but all you need to do is change the http to https in the url, and possibly change the port to the correct port if this has changed... Again, SickBeard should be running fine on https, you just need to use the correct link and not the adm desktop icon.
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T
Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python
Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic
About Me: http://fockwulf.wix.com/index