It is currently Tue Dec 01, 2020 11:07 pm
All times are UTC + 8 hours

Wait 40 sec / Trying to fetch NZB from ........

SABnzbd makes Usenet as simple and streamlined as possible by automating everything we can. All you have to do is add an .nzb. SABnzbd takes over from there, where it will be automatically downloaded, verified, repaired, extracted and filed away with zero human interaction.

Moderators: JohnnyFive, clinton.hall

Wait 40 sec / Trying to fetch NZB from ........

Postby Ianolga » Mon Aug 24, 2015 2:11 pm

Hi All,
I had a problem with SAB today and couldn't get it started even when ssh SAB restart was used so I deleted SAB in frustration and re installed.
Set SAB up as normal, changed the api's on CouchPotato and SickRage, all good both programs talking to SAB. I change api's on my 2 NZB sites and download a test NZB from each site to the SAB watched folder which promptly scanned the folder and downloaded the file, post processing scripts ran as expected, fantastic !!!! whooo whoooo :lol:
I then selected a file from each NZB site and sent that file to SAB using the sites "Send to SAB" icon but SAB gets stuck trying to download the NZB file in the Queue with this message, (This also happens when SickRage and CouchPotato pass the NZB to SAB)
"WAIT .. sec / Trying to fetch NZB from https://.....
Did the obligatory search here and at the SAB forum but no joy, some discussion around Python but far too technical for me. Restarted both SAB and the NAS no luck, am I missing a setting in SAB somewhere?

SAB 20140701
Python 2.7.10.r10

Anyone point me in the right direction???

Thanks, Ian.
Last edited by Ianolga on Mon Aug 24, 2015 4:03 pm, edited 1 time in total.
Ianolga
 
Posts: 25
Joined: Thu Jul 24, 2014 8:57 am

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby thomaslo » Mon Aug 24, 2015 3:42 pm

Same problem here. I think it happend after upgrade to 1cd6405 V10.12

--
Thomas
thomaslo
 
Posts: 6
Joined: Thu Aug 15, 2013 6:13 pm

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby clinton.hall » Mon Aug 24, 2015 6:07 pm

thomaslo wrote:Same problem here. I think it happend after upgrade to 1cd6405 V10.12

--
Thomas


What does that version relate to? was this a SABnzbd update or firmware?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
User avatar
clinton.hall
 
Posts: 839
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby thomaslo » Mon Aug 24, 2015 6:36 pm

I think there is some kind of autoupdate when i restart sabnabd. Last time i restarted, it updated to a new version.

admin@AS-604T-E6C4:~ $ /volume1/.@plugins/etc/init.d/S90sabnzbdplus restart
Shutting down SABnzbdplus at Mon Aug 24 12:34:28 CEST 2015...
Checking if SABnzbdplus needs to be removed from crontab... crontab: must be suid to work properly
Done
Waiting for SABnzbdplus to shut down: 1, Done (Mon Aug 24 12:34:29 CEST 2015)
Performing SABnzbdplus prestartup checks at Mon Aug 24 12:34:29 CEST 2015...
Creating Symbolic links for required utils... Done
crontab: must be suid to work properly
Done
Checking for a new version...
Downloading online version file... Done
Reading file... Done
Determine current (installed) version... 0.7.20 (72099)
Determine stable release... 0.7.20 (72099)
Checking which is newest... Current, skipping upgrade
Checking if all configured directories exist........HEAD is now at 1cd6405 V10.12 for merge.
Already up-to-date.
Done
Starting SABnzbdplus Done (Mon Aug 24 12:34:38 CEST 2015)

--
Thomas
thomaslo
 
Posts: 6
Joined: Thu Aug 15, 2013 6:13 pm

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby clinton.hall » Mon Aug 24, 2015 8:45 pm

So that comment relates to the nzbToMedia scripts. while they do update, they cannot break SABnzbd.

The update to SABnzbd was to version 0.7.20.

Did this change in SABnzbd functionality coincide with an update of Python App?
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
User avatar
clinton.hall
 
Posts: 839
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby thomaslo » Mon Aug 24, 2015 10:41 pm

ok. sorry for the confusion. I think it worked after the 2'nd python ugrade, but i am not sure

From the log:
2015-08-24 16:35:52,949::DEBUG::[interface:421] API-call from 192.168.1.1 [Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/43.0.2357.52 Safari/537.36] {'apikey': '6da9d8ea9ef386da51351fb9446210ef', 'name': 'https://www.indexer.com/getnzb/key/tvshow 720p?i=undefined&r=undefined&del=1', 'cat': 'TV', 'mode': 'addurl', 'output': 'json', '_': '1440426951759'}
2015-08-24 16:35:52,950::INFO::[__init__:513] Fetching https://www.indexer.com/getnzb/key/tvshow 720p?i=undefined&r=undefined&del=1
2015-08-24 16:35:52,951::INFO::[nzbqueue:218] Saving queue
2015-08-24 16:35:52,952::DEBUG::[__init__:844] Saving data for SABnzbd_nzo_BHLNIF in /usr/local/AppCentral/sabnzbdplus/config/admin/future
2015-08-24 16:35:52,954::INFO::[__init__:919] Saving data for queue9.sab in /usr/local/AppCentral/sabnzbdplus/config/admin/queue9.sab
2015-08-24 16:35:52,957::DEBUG::[notifier:112] Sending registration to localhost:23053
2015-08-24 16:35:52,957::DEBUG::[notifier:102] Checking icon
2015-08-24 16:35:52,959::DEBUG::[notifier:219] To : localhost:23053 <<class 'gntp.GNTPRegister'>>
2015-08-24 16:35:52,960::DEBUG::[growler:193] Cannot register with Growl [Errno 111] Connection refused
2015-08-24 16:35:52,988::DEBUG::[interface:421] API-call from 192.168.1.1 [Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/43.0.2357.52 Safari/537.36] {'output': 'json', 'apikey': 'api-key', 'limit': '5', 'mode': 'queue'}
2015-08-24 16:35:53,459::INFO::[urlgrabber:116] Grabbing URL https://www.indexer.com/getnzb/key/tvsh ... ined&del=1
2015-08-24 16:35:53,600::DEBUG::[urlgrabber:372] No response from indexer, retry after 60 sec
2015-08-24 16:35:53,601::INFO::[urlgrabber:199] Retry URL https://www.indexer.com/getnzb/key/tvsh ... ined&del=1
2015-08-24 16:35:54,231::DEBUG::[interface:421] API-call from 192.168.1.1 [Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/43.0.2357.52 Safari/537.36] {'output': 'json', 'apikey': 'api-key', 'limit': '5', 'mode': 'queue'}
thomaslo
 
Posts: 6
Joined: Thu Aug 15, 2013 6:13 pm

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby Ianolga » Tue Aug 25, 2015 5:47 am

Hi Clinton,
I updated Python sometime last week and it seemed to be working ok until SAB simply would not start, I then re-installed SAB and started to get the problems.
Ianolga
 
Posts: 25
Joined: Thu Jul 24, 2014 8:57 am

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby clinton.hall » Tue Aug 25, 2015 8:16 pm

Do you have any logs.
AS-604T
3 x ST4000DM0000 (Seagate 4TB) in Raid5
2 GB RAM expansion
AS-302T

Apps (user)
NZBGet - CouchPotato - SickBeard - Git - Python

Apps (maintainer):
NZBGet - BitTorrent Sync - Mylar - LazyLibrarian - Gamez
-Maintenance of Apps acquired from JohhnyFive since ADM2.0:
SABnzbd - CouchPotato - SickBeard - HeadPhones - Subsonic

About Me: http://fockwulf.wix.com/index
User avatar
clinton.hall
 
Posts: 839
Joined: Thu May 09, 2013 7:01 pm
Location: New Zealand

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby Ianolga » Tue Aug 25, 2015 8:39 pm

You'll have to point me in the direction of the logs, I'm not that tech savvy.
Do you have any ideas on what is happening?
Ianolga
 
Posts: 25
Joined: Thu Jul 24, 2014 8:57 am

Re: Wait 40 sec / Trying to fetch NZB from ........

Postby thomaslo » Tue Aug 25, 2015 11:23 pm

I have done som research and run this script

import urllib

url = 'https://www.indexer.com/getnzb/xxx'

opener = urllib.FancyURLopener({})
fn, header = opener.retrieve(url)
print "\nheader is:\n", header
print "\nFirst 5 lines from webserver response:"
with open(fn) as myfile:
print myfile.read(50)

output:
Traceback (most recent call last):
File "test.sh", line 6, in <module>
fn, header = opener.retrieve(url)
File "/usr/local/AppCentral/python/lib/python2.7/urllib.py", line 245, in retrieve
fp = self.open(url, data)
File "/usr/local/AppCentral/python/lib/python2.7/urllib.py", line 213, in open
return getattr(self, name)(url)
File "/usr/local/AppCentral/python/lib/python2.7/urllib.py", line 443, in open_https
h.endheaders(data)
File "/usr/local/AppCentral/python/lib/python2.7/httplib.py", line 1049, in endheaders
self._send_output(message_body)
File "/usr/local/AppCentral/python/lib/python2.7/httplib.py", line 893, in _send_output
self.send(msg)
File "/usr/local/AppCentral/python/lib/python2.7/httplib.py", line 855, in send
self.connect()
File "/usr/local/AppCentral/python/lib/python2.7/httplib.py", line 1274, in connect
server_hostname=server_hostname)
File "/usr/local/AppCentral/python/lib/python2.7/ssl.py", line 352, in wrap_socket
_context=self)
File "/usr/local/AppCentral/python/lib/python2.7/ssl.py", line 579, in __init__
self.do_handshake()
File "/usr/local/AppCentral/python/lib/python2.7/ssl.py", line 808, in do_handshake
self._sslobj.do_handshake()
IOError: [Errno socket error] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590)

Seems like it has to do with ssl certificate
thomaslo
 
Posts: 6
Joined: Thu Aug 15, 2013 6:13 pm

Next

Return to SABnzbdplus

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 1 guest