Page 2 of 2

Re: SAB not sorting after download.

Posted: Thu Jun 12, 2014 10:39 am
by bostoneric
ok kinda lost. not sure what changed and what else i need to double check.

Re: SAB not sorting after download.

Posted: Thu Jun 12, 2014 2:38 pm
by clinton.hall
A lot changed... So it looks like something in your autoProcessMedia.cfg might not be valid...
Can you email or pm this file to me?

Re: SAB not sorting after download.

Posted: Sat Jun 14, 2014 11:40 am
by bostoneric
msg sent.

thanks!

Re: SAB not sorting after download.

Posted: Mon Jun 16, 2014 10:49 am
by bostoneric
still the same. very strange.

Code: Select all

           Traceback (most recent call last):
  File "/volume1/Download/nzbToMedia/nzbToSickBeard.py", line 155, in <module>
    result = nzbToMedia.main(sys.argv, section)
  File "/volume1/Download/nzbToMedia/nzbToMedia.py", line 445, in main
    nzbtomedia.initialize(section)
  File "/volume1/Download/nzbToMedia/nzbtomedia/__init__.py", line 203, in initialize
    if not config.migrate():
  File "/volume1/Download/nzbToMedia/nzbtomedia/nzbToMediaConfig.py", line 223, in migrate
    CFG_OLD.write()
  File "/volume1/Download/nzbToMedia/libs/configobj/configobj.py", line 2123, in write
    'ascii'))
UnicodeEncodeError: 'ascii' codec can't encode character u'\u201c' in position 2036: ordinal not in range(128)

Re: SAB not sorting after download.

Posted: Mon Jun 16, 2014 12:35 pm
by clinton.hall
Sorry.. I should have seen this earlier!

In autoProcessMedia.cfg don't use "" around the values you have defined... in particular, around the username and password for SickBeard.

Re: SAB not sorting after download.

Posted: Tue Jun 17, 2014 12:23 pm
by bostoneric

Code: Select all



 



           [20:13:35] [INFO]::MAIN: Loading config from [/volume1/Download/nzbToMedia/autoProcessMedia.cfg]
[20:13:35] [INFO]::MAIN: Checking database structure...
[20:13:35] [INFO]::MAIN: Checking if git needs an update
[20:13:36] [INFO]::MAIN: There is a newer version available  (you're 1 commit behind)
[20:13:36] [INFO]::MAIN: nzbToMedia Version:9eeff323ac6b956700812d75f0745be21e51d366 Branch:master (Linux 3.7.9)
[20:13:36] [WARNING]::MAIN: Failed to locate ffmpeg, transcoding disabled!
[20:13:36] [WARNING]::MAIN: Install ffmpeg with x264 support to enable this feature  ...
[20:13:36] [WARNING]::MAIN: Failed to locate ffprobe, video corruption detection disabled!
[20:13:36] [WARNING]::MAIN: Install ffmpeg with x264 support to enable this feature  ...
[20:13:36] [INFO]::MAIN: #########################################################
[20:13:36] [INFO]::MAIN: ## ..::[nzbToMedia.pyc]::.. ##
[20:13:36] [INFO]::MAIN: #########################################################
[20:13:36] [INFO]::MAIN: Script triggered from SABnzbd
[20:13:37] [ERROR]::MAIN: Unable to locate a section with subsection:tv enabled in your autoProcessMedia.cfg, exiting!
[20:13:37] [ERROR]::MAIN: A problem was reported in the /volume1/Download/nzbToMedia/nzbToSickBeard.py script.

Re: SAB not sorting after download.

Posted: Tue Jun 17, 2014 12:34 pm
by clinton.hall
in autoProcessMedia.cfg

Code: Select all

[SickBeard]
  [[tv]]
    enabled = 1

Re: SAB not sorting after download.

Posted: Sat Jun 21, 2014 12:11 pm
by bostoneric
movie download

Code: Select all

[05:22:28] [INFO]::MAIN: Loading config from [/volume1/Download/nzbToMedia/autoProcessMedia.cfg]
[05:22:29] [INFO]::MAIN: Checking database structure...
[05:22:29] [INFO]::MAIN: Checking if git needs an update
[05:22:34] [INFO]::MAIN: There is a newer version available  (you're 1 commit behind)
[05:22:34] [INFO]::MAIN: nzbToMedia Version:9eeff323ac6b956700812d75f0745be21e51d366 Branch:master (Linux 3.7.9)
[05:22:34] [WARNING]::MAIN: Failed to locate ffmpeg, transcoding disabled!
[05:22:34] [WARNING]::MAIN: Install ffmpeg with x264 support to enable this feature  ...
[05:22:34] [WARNING]::MAIN: Failed to locate ffprobe, video corruption detection disabled!
[05:22:34] [WARNING]::MAIN: Install ffmpeg with x264 support to enable this feature  ...
[05:22:34] [INFO]::MAIN: #########################################################
[05:22:34] [INFO]::MAIN: ## ..::[nzbToMedia.pyc]::.. ##
[05:22:34] [INFO]::MAIN: #########################################################
[05:22:34] [INFO]::MAIN: Script triggered from SABnzbd
[05:22:37] [ERROR]::MAIN: Category:[movies] is not defined or is not enabled. Please rename it or ensure it is enabled for the appropriate section in your autoProcessMedia.cfg and try again.
[05:22:37] [ERROR]::MAIN: A problem was reported in the /volume1/Download/nzbToMedia/nzbToCouchPotato.py script.
tv download

Code: Select all

[00:58:32] [INFO]::MAIN: Loading config from [/volume1/Download/nzbToMedia/autoProcessMedia.cfg]
[00:58:32] [INFO]::MAIN: Checking database structure...
[00:58:32] [INFO]::MAIN: Checking if git needs an update
[00:58:34] [INFO]::MAIN: There is a newer version available  (you're 1 commit behind)
[00:58:34] [INFO]::MAIN: nzbToMedia Version:9eeff323ac6b956700812d75f0745be21e51d366 Branch:master (Linux 3.7.9)
[00:58:34] [WARNING]::MAIN: Failed to locate ffmpeg, transcoding disabled!
[00:58:34] [WARNING]::MAIN: Install ffmpeg with x264 support to enable this feature  ...
[00:58:34] [WARNING]::MAIN: Failed to locate ffprobe, video corruption detection disabled!
[00:58:34] [WARNING]::MAIN: Install ffmpeg with x264 support to enable this feature  ...
[00:58:34] [INFO]::MAIN: #########################################################
[00:58:34] [INFO]::MAIN: ## ..::[nzbToMedia.pyc]::.. ##
[00:58:34] [INFO]::MAIN: #########################################################
[00:58:34] [INFO]::MAIN: Script triggered from SABnzbd
[00:58:34] [INFO]::MAIN: Auto-detected SECTION:SickBeard
/usr/local/bin/unrar
/usr/bin/unzip
/bin/tar
/usr/bin/unxz
/usr/bin/unlzma
/usr/builtin/bin/7z
/usr/bin/bunzip2
/usr/local/bin/unrar
/usr/bin/unzip
/bin/tar
/usr/bin/unxz
/usr/bin/unlzma
/usr/builtin/bin/7z
/usr/bin/bunzip2
/usr/local/bin/unrar
/usr/bin/unzip
/bin/tar
/usr/bin/unxz
/usr/bin/unlzma
/usr/builtin/bin/7z
/usr/bin/bunzip2
/usr/local/bin/unrar
/usr/bin/unzip
/bin/tar
/usr/bin/unxz
/usr/bin/unlzma
/usr/builtin/bin/7z
/usr/bin/bunzip2
/usr/local/bin/unrar
/usr/bin/unzip
/bin/tar
/usr/bin/unxz
/usr/bin/unlzma
/usr/builtin/bin/7z
/usr/bin/bunzip2
[00:58:34] [INFO]::MAIN: Calling SickBeard:tv to post-process:TVSHOW.S01E10.720p.HDTV.X264-DIMENSION.nzb
[00:58:34] [INFO]::MAIN: Attempting to auto-detect tv fork
[00:58:34] [INFO]::MAIN: Could not connect to SickBeard:tv to perform auto-fork detection!
[00:58:34] [INFO]::MAIN: SickBeard:tv fork auto-detection failed
[00:58:34] [INFO]::MAIN: SickBeard:tv fork set to default
[00:58:34] [INFO]::MAIN: FLATTEN: Flattening directory: /volume1/Download/SABnzbd/complete/TVSHOW/Season 1
[00:58:34] [POSTPROCESS]::SICKBEARD: SUCCESS: The download succeeded, sending a post-process request
[00:58:34] [ERROR]::SICKBEARD: Unable to open URL: http://localhost:8081/home/postprocess/processEpisode
[00:58:34] [ERROR]::MAIN: A problem was reported in the /volume1/Download/nzbToMedia/nzbToSickBeard.py script.

Re: SAB not sorting after download.

Posted: Sun Jun 22, 2014 10:25 am
by clinton.hall
for movies, in autoProcessMedia.cfg

Code: Select all

[CouchPotato]
  [[movies]]
    enabled = 1
then in Both CouchPotato and SickBeard sections, make sure you set the correct host, port, username/pass (SickBeard) and apikey (CouchPotato).