New user: AS6104T Drive dropped out and froze my NAS
Posted: Wed Feb 21, 2018 11:10 pm
Hi all, I'm new to this forum and a first time Asustor NAS user. My model is the AS6104T and my problem is that one of my WD Red 4TB drives dropped out while I was downloading SWTOR onto an ISCSI Lun that I created for my Steam games and other various games and it also locked up my NAS to the point I could not log into the web interface!
I checked in the logs and I can not find any mention of a drive dropping out just a lot of warnings that my NAS did not shut down properly which is due to another issue of the NAS unit not restarting through software unless I physically power it down and power it back on, but that's for another thread.
I physically powered down the unit and powered it back on and now it's indicating that it's "Synchronizing", my question is should I be concerned that the drive is faulty or has anyone else experienced this issue?
The NAS unit and the drives were purchased together just over a month ago so I doubt it's a hardware failure but I'm sure someone more experienced on these forums will have a better idea of what might be the issue or at least where to look for the log files so as to correctly diagnose and repair the fault.
I have had issues finding any decent documentation on this product so any and all help will be much appreciated and I am willing to make a video to help others that may have the same or similar issues as myself
I checked in the logs and I can not find any mention of a drive dropping out just a lot of warnings that my NAS did not shut down properly which is due to another issue of the NAS unit not restarting through software unless I physically power it down and power it back on, but that's for another thread.
I physically powered down the unit and powered it back on and now it's indicating that it's "Synchronizing", my question is should I be concerned that the drive is faulty or has anyone else experienced this issue?
The NAS unit and the drives were purchased together just over a month ago so I doubt it's a hardware failure but I'm sure someone more experienced on these forums will have a better idea of what might be the issue or at least where to look for the log files so as to correctly diagnose and repair the fault.
I have had issues finding any decent documentation on this product so any and all help will be much appreciated and I am willing to make a video to help others that may have the same or similar issues as myself