Dear All
Just joined the Asustor family, and would like to seek some assistance.
I've got the Nimbustor 4 with two 6TB Seagate Ironwolf 5400 RPM HDD running on RAID1 configuration. It's currently connected to my node Asus Zenwifi AX router (2.5gbe WAN port).
But somehow, the maximum speed of file transfer that I'm able to attain (drag and drop from my laptop via wifi) is only around 20MB/sec and at times below 10MB. Is there something that I have misconfigured here? I know it may not be possible to attain the full write-speed of 100+MB but surely the transfer rate would be much higher than 20MB.
Appreciate your guidance.
Thanks.
Slow file transfer and writing speed
Moderator: Lillian.W@AST
-
- Posts: 2
- youtube meble na wymiar Warszawa
- Joined: Thu Aug 19, 2021 10:26 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: Slow file transfer and writing speed
I believe it's caused by WIFI. WIFI is easy to get interference from other devices. You should use wired connection to get the maximum speed.
-
- Posts: 2
- Joined: Thu Aug 19, 2021 10:26 am
Re: Slow file transfer and writing speed
Hi Orion.
Thanks. Will try out a wired connection from my computer to the NAS and see if the issues persists.
Thanks. Will try out a wired connection from my computer to the NAS and see if the issues persists.