how to manually rebuild nas 5110

Share your awesome tips and tricks here.

Moderator: Lillian.W@AST

Post Reply
mbbcat
Posts: 1
youtube meble na wymiar Warszawa
Joined: Wed Aug 26, 2015 10:29 pm

how to manually rebuild nas 5110

Post by mbbcat »

HI,
My 5110 nas will not load its volume - support inspected by remote ssh & says that the system volume ( as opposed to the data volume is corrupt, by some magic with mdadm they managed to mount the data volume for ftp access ( only) however before the data volume could be backed up the power went down leaving a non usable nas again

Please can someone guide me through the steps to
check & fix all disks / partitions
check & fix the data volume & mount it to be accessible again
& if possible get some more services going - rsync / samba etc ?

Many thanks

M
muad_dib77
Posts: 3
Joined: Sat Dec 10, 2016 4:25 am

Re: how to manually rebuild nas 5110

Post by muad_dib77 »

Apologies for late reply - you've likely either solved or given up at this stage.

Same thing happened to me - around the same time as you as well... AND I have a 5110 ... (apart from the power related issue)..
I didn't think to try ftp through ssh. Instead I transferred the drives to a desktop where I'm using a 3rd party tool to recover the data I didn't have copies of elsewhere.

There's a few tools available that will do the job.

EDIT: Just found this:
https://support.asustor.com/index.php?/ ... using-a-pc

I haven't tested to see if the information is still valid..
Post Reply

Return to “Tips & Tricks”