i just opened a ticket with support; in the while, if anyone can help...
In the while i tried creating another JBOD drive (using other 2 drives), thinking that maybe the nas was expecting to find a JBOD setup to boot (and to use original drives after that): no successo.So, i guess i did a mistake.
Current config is 2 x WD RED 3Tb in JBOD (bay 1&2)
I was thinking to buy new drives and see what i can do with the ones i have.
So i removed all the drives and inserted an old one in bay1 and installed ADM (as "only disk").
Everything went fine and that's it.
Then i removed the drive and ripristinated the previous situation.
Now ADM is inaccessible. Control Center tells me that system is not initialized.
Ho can i recuperate my datas?
Also, if i put the original JBDO drives in bays 3 and 4, and using another ADM setup to boot i can't access the original drives to recuperate the datas.
Any idea / hints?
Thanks.
(anyway, conforming the "system migration" infos, i didn't do anything wrong. So what?!)