So, I have the AS1002T.
Today I have two 2TB drives in JBOD, or it is called standalone.
I will put two 3TB WD RED in RAID1.
Will I be able to remove the old ones, put in the new ones, configure the RAID1 and connect the old drives via the USB port and copy all back?
New disks in NAS, how transfer data?
Moderator: Lillian.W@AST
-
- Posts: 30
- youtube meble na wymiar Warszawa
- Joined: Tue May 17, 2016 4:37 pm
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: New disks in NAS, how transfer data?
No, you cannot copy data back by this way. You'll need to backup your data to other place first. Then, reinitialize your NAS with 3TB disk * 2 (RAID-1). Copy data back after that.
-
- Posts: 30
- Joined: Tue May 17, 2016 4:37 pm
Re: New disks in NAS, how transfer data?
Yuck, I do not have enough space anywhere to do this.
Perhaps if I pack everything on one 2TB, it might work.
Perhaps if I pack everything on one 2TB, it might work.