!!!!!WARNING!!!!!
Yesterday I opened a ticket @ asus tech support
My question:
After deadbolt I've disconnected NAS from the internet but I did not restart it as it seems this can cause several problems.
Now Asus has released ADM 4. that seems to be patched
BUT
My NAS is still showing the deadbolt page, how can I install the new ADM?
Is it enough to get back the original home page with the "putty" workaround already described in the forum?
And how one can get rid of all the crypted files? (Happily I have redundant backups of my NAS)
Is it enough to reset to fabric through the option in ADM?
!!!!! ASUS ANSWER !!!!!
good day
For the moment this new firmware is only reserved for NAS that have not been affected by Deadbolt.
we will get back to you as soon as possible and communicate soon on other methods to solve the critical issue
WARNING on new ADM 4.0.4.RQO2
-
- Posts: 23
- youtube meble na wymiar Warszawa
- Joined: Sun May 09, 2021 2:17 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: WARNING on new ADM 4.0.4.RQO2
Did you try it (which shows in the middle of the anchor page https://www.asustor.com/en-gb/knowledge ... oup_id=630):
PS: I cannot not try this procedure as my NAS is just fine.
Code: Select all
If the ransomware page remains after you connect to a network:
* Please turn off your NAS, remove all hard drives and reboot.
* When the initialization page appears, reinsert the hard drives.
* Please follow the instructions above to update your NAS.
-
- Posts: 23
- Joined: Sun May 09, 2021 2:17 am
Re: WARNING on new ADM 4.0.4.RQO2
I did not try as they say it's for non affected NAS
But reading the page it is written the exact contrary
I asked to tech support
But reading the page it is written the exact contrary
I asked to tech support
-
- Posts: 31
- Joined: Mon Mar 07, 2016 6:25 pm
Re: WARNING on new ADM 4.0.4.RQO2
Follow the instructions in the link, it is for deadbolt infected NAS devicesEgosumquisum wrote:I did not try as they say it's for non affected NAS
But reading the page it is written the exact contrary
I asked to tech support
-
- Posts: 23
- Joined: Sun May 09, 2021 2:17 am
-
- Posts: 40
- Joined: Wed Feb 18, 2015 1:31 am
Re: WARNING on new ADM 4.0.4.RQO2
I got that ransomware screen originally and then got the initialize screen as well. Then I went through the instructions given here on updating without initializing and my system is backed up I think apps are gonna have to be replaced but it was able to recognize my myarchive discs so I can replace those directories that were dead bolted.Egosumquisum wrote:I did not try as they say it's for non affected NAS
But reading the page it is written the exact contrary
I asked to tech support