Just setting up my 5304 (4 bay) and have 3 *2tb disk in raid 5 as volume 2 - all good
I am using an older 2tb disk for vol 1 that is starting to show errors
so i need to replace it
As this is effectively a system volume in my case which will not be used for data just ADM apps etc
when replacing what is the capacity i need ie could i go for say a 500gb ssd (to benefit from speed and can this be a cache at the same time or is that ssd another disk which i do not have room for), or do i need greater capacity in which case i would use another 2tb disk
i will be using an external USB to backup for the raid array but will not bother backing up volume 1
i understand if volume 1 fails i will loose all my apps but if this does happen i can quickly rebuild it so this is not an issue, i have already had to do this once, it did not affect volume 2 integrity so is low risk IMO.
5304t disk configuration options
-
- Posts: 12
- youtube meble na wymiar Warszawa
- Joined: Sun Aug 29, 2021 8:45 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: 5304t disk configuration options
It's a good idea to use SSD as volume 1. Don't worry about the size. I believe 128GB should be all right in case that you don't install all apps. Cache and Storage are exclusive. You cannot merge those features into a disk under ADM. And be aware that you'll need to follow a special guide (https://support.asustor.com/index.php?/ ... ts-damaged) to replace volume 1.
-
- Posts: 12
- Joined: Sun Aug 29, 2021 8:45 am
Re: 5304t disk configuration options
Thanks Orion
I already had to replace volume 1 and its more of an inconvenience than anything
Ill order an ssd for vol 1
regards
Ed
I already had to replace volume 1 and its more of an inconvenience than anything
Ill order an ssd for vol 1
regards
Ed