I compile Module using cross compiling. When I load in Asustor, the error is "_tracepoint_module_put"
Anyone success compile Module.
Thanks
How to Compile Module for Asustor
Moderator: Lillian.W@AST
-
- Posts: 75
- youtube meble na wymiar Warszawa
- Joined: Mon Oct 07, 2013 1:36 pm
-
- Posts: 127
- Joined: Tue Nov 19, 2013 7:19 pm
Re: How to Compile Module for Asustor
Hey z1022,
What module did you compile? Of course you did use the cross compile toolchain I assume, yes? I did try to add the zfs module but it failed loading too (other error message). I guess since it probably would need the kernel compiled with some other options. Another module worked fine - trying to remember which it was ... don't remember right now.
cu
Thomas
What module did you compile? Of course you did use the cross compile toolchain I assume, yes? I did try to add the zfs module but it failed loading too (other error message). I guess since it probably would need the kernel compiled with some other options. Another module worked fine - trying to remember which it was ... don't remember right now.
cu
Thomas
Storage: AS-202T | AS-604T (borrowed)
PC/Laptop: iMac 27" & rMBP 15"
Media Server/Player: Plex on ASUSTOR NAS & Samsung TV
PC/Laptop: iMac 27" & rMBP 15"
Media Server/Player: Plex on ASUSTOR NAS & Samsung TV
-
- Posts: 75
- Joined: Mon Oct 07, 2013 1:36 pm
Re: How to Compile Module for Asustor
Hi Thomas,
I want to compile DVB module for my TV-Stick. Which module you success to compile and how to ? I want to try your success compile module for testing my cross compile toolchain setup.
I got the config file from Asustor support. I will try to compile DVB module later.
I want to compile DVB module for my TV-Stick. Which module you success to compile and how to ? I want to try your success compile module for testing my cross compile toolchain setup.
I got the config file from Asustor support. I will try to compile DVB module later.
- Attachments
-
- linux-2.6.39-x86.config.zip
- (16.62 KiB) Downloaded 582 times
- mafredri
- Posts: 371
- Joined: Sat Mar 22, 2014 8:41 am
Re: How to Compile Module for Asustor
Hi,z1022 wrote:Hi Thomas,
I want to compile DVB module for my TV-Stick. Which module you success to compile and how to ? I want to try your success compile module for testing my cross compile toolchain setup.
I got the config file from Asustor support. I will try to compile DVB module later.
I've been trying to compile modules for the kernel without the config for a while now, I could walk you through the compilation process later today.
Did you happen to receive the x86_64 kernel config also, or just the 32-bit one? I would much appreciate it if you could post that also, assuming you have it .
Regards,
Mathias
Hi, I'm new here. Looking to be active in the community and help with development .
Storage: AS-604T with 3GB RAM (Kingston KVR1333D3S8S9/2G)
Storage: AS-604T with 3GB RAM (Kingston KVR1333D3S8S9/2G)
-
- Posts: 75
- Joined: Mon Oct 07, 2013 1:36 pm
Re: How to Compile Module for Asustor
You can try to ask from Asustor support.
- mafredri
- Posts: 371
- Joined: Sat Mar 22, 2014 8:41 am
Re: How to Compile Module for Asustor
I've tried, but they're slow to respond .z1022 wrote:You can try to ask from Asustor support.
Anyhow, since you have an old kernel configuration I'm assuming you're not running ADM 2.1? If you are running the old 2.6.39 kernel then do you also have the old toolchain for compilation?
Hi, I'm new here. Looking to be active in the community and help with development .
Storage: AS-604T with 3GB RAM (Kingston KVR1333D3S8S9/2G)
Storage: AS-604T with 3GB RAM (Kingston KVR1333D3S8S9/2G)
-
- Posts: 75
- Joined: Mon Oct 07, 2013 1:36 pm
Re: How to Compile Module for Asustor
I push them provide to me.
Now I running ADM2.1 Bate and use ADM 2.0 GPL_Source.tar and asustor-toolchain-32bit.tar.
I success to compile dvb_core.ko and loaded. However, I don't know whether it work or not.
Now I running ADM2.1 Bate and use ADM 2.0 GPL_Source.tar and asustor-toolchain-32bit.tar.
I success to compile dvb_core.ko and loaded. However, I don't know whether it work or not.
- mafredri
- Posts: 371
- Joined: Sat Mar 22, 2014 8:41 am
Re: How to Compile Module for Asustor
Ah, you have gotten that far already. If so, you could run the commandz1022 wrote:I push them provide to me.
Now I running ADM2.1 Bate and use ADM 2.0 GPL_Source.tar and asustor-toolchain-32bit.tar.
I success to compile dvb_core.ko and loaded. However, I don't know whether it work or not.
Code: Select all
dmesg
Hi, I'm new here. Looking to be active in the community and help with development .
Storage: AS-604T with 3GB RAM (Kingston KVR1333D3S8S9/2G)
Storage: AS-604T with 3GB RAM (Kingston KVR1333D3S8S9/2G)
-
- Posts: 75
- Joined: Mon Oct 07, 2013 1:36 pm
Re: How to Compile Module for Asustor
I can load the TV stick devices and use MuMuDVB 1.7.3 streaming TV over a network. using VLC to watch.