Hi,
I can't reproduce ... can you write here the exact sequence of command you will do ?
Are you sure to stop all ... ? before restarting
NOTE : I have write command here before based on the new version ... so please take care that you can't have exactly same options ... sorry.
Philippe.
[update ... to OctoPrint 1.6.1] 3D printer console & management
- father.mande
- Posts: 1818
- youtube meble na wymiar Warszawa
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: [OctoPrint] 3D printer console & management
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
-
- Posts: 9
- Joined: Sat Jun 15, 2019 4:04 am
Re: [OctoPrint] 3D printer console & management
Hi Philippe,
Stop looking, it's not a bug . when we start a server via a terminal, and therefore in a new session, if it is closed, it stops the server automatically, like a kill.
That's how it is on all systems.
I think it is misunderstood, I am talking about a software server, not physical.
Stop looking, it's not a bug . when we start a server via a terminal, and therefore in a new session, if it is closed, it stops the server automatically, like a kill.
That's how it is on all systems.
I think it is misunderstood, I am talking about a software server, not physical.
- father.mande
- Posts: 1818
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: [OctoPrint] 3D printer console & management
Hi,
if not, like starting octoprint in server mode or mjpg-streamer ... when terminal is closed all tasks are closed ...
Philippe.
No problem ... "octoprint" command use nohup for some task and daemon mode for octoprint itself ... so it's a workaround to avoid close terminal problems.vlotho wrote:Hi Philippe,
Stop looking, it's not a bug . when we start a server via a terminal, and therefore in a new session, if it is closed, it stops the server automatically, like a kill.
That's how it is on all systems.
I think it is misunderstood, I am talking about a software server, not physical.
if not, like starting octoprint in server mode or mjpg-streamer ... when terminal is closed all tasks are closed ...
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
- father.mande
- Posts: 1818
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: [OctoPrint 1.4.0] 3D printer console & management
Hi,
Please, note that you can upgrade Asustor octoprint to 1.4.0 stable with the internal process (proposed as a pop_up)
At end ... octoprint try to restart but failed (under investigation ... like it don't use the script provide for restart ???)
... 2 solutions
1 ... wait after failed message ... use the restart choice in system menu (top bar icon (like a power button))
OR
3 ... open a terminal (root / your_admin_password) and use : octoprint restart command
It's all.
F.Y.I. I restart (after a non professional repair ... even some erractic crash can occurs) my AS500T ... so I can now restart dev.
NEW version of octoprint will be available soon :
... support of multiple (different or same) printers
... ... each under a separate user have it's own A.D.M. desktop icons (APKG dynamically created and installed after octoprint is started)
... support of multiple webcam (all UVC but any model supported)
... ready to support other NAS architecture (armhf / arm64) ... perhaps also i386 if I have some free time.
Philippe.
Please, note that you can upgrade Asustor octoprint to 1.4.0 stable with the internal process (proposed as a pop_up)
At end ... octoprint try to restart but failed (under investigation ... like it don't use the script provide for restart ???)
... 2 solutions
1 ... wait after failed message ... use the restart choice in system menu (top bar icon (like a power button))
OR
3 ... open a terminal (root / your_admin_password) and use : octoprint restart command
It's all.
F.Y.I. I restart (after a non professional repair ... even some erractic crash can occurs) my AS500T ... so I can now restart dev.
NEW version of octoprint will be available soon :
... support of multiple (different or same) printers
... ... each under a separate user have it's own A.D.M. desktop icons (APKG dynamically created and installed after octoprint is started)
... support of multiple webcam (all UVC but any model supported)
... ready to support other NAS architecture (armhf / arm64) ... perhaps also i386 if I have some free time.
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
-
- Posts: 5
- Joined: Sun Jun 21, 2020 12:22 pm
Re: [OctoPrint] 3D printer console & management
I use the nohup command in situations like this. It will allow you to start an app via SSH but it will continue to run when the SSH connection is closed. For example:father.mande wrote:Hi,It's a bug ... I will checkvlotho wrote:if the server (octoprint) is running and you close the terminal, the server ( octoprint) is stopped automatically. that's what I was trying to say.
Thanks Philippe.
Philippe.
Code: Select all
[/volume1/.@root] # nohup octoprint start&
jim
- father.mande
- Posts: 1818
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
Re: [OctoPrint 1.4.0] 3D printer console & management
Hi,
Sorry for long time without news ... I am at 600 km of my 3D Printer ... so can't tests my last change.
Please wait ... but all suggestion provide by other users are good and don't hesitate to test it.
Thanks to jxmot (even Octoprint, normally is started as daemon ... )
Philippe.
Sorry for long time without news ... I am at 600 km of my 3D Printer ... so can't tests my last change.
Please wait ... but all suggestion provide by other users are good and don't hesitate to test it.
Thanks to jxmot (even Octoprint, normally is started as daemon ... )
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
- father.mande
- Posts: 1818
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
[OctoPrint 1.5.3] 3D printer console & management
Hi,
F.Y.I. you can upgrade octoprint to version 1.5.3 using the internal update mechanism ...
don't forgot to disable / enable octoprint APKG (the internal restart don't work (A.D.M. is not a standard Linux distribution) after the END of the update
Also if you have an Ender-3 or an Ender3 Pro ... don't forgot to reapply the patch to be able to have access to the SD-Card.
Philippe.
F.Y.I. you can upgrade octoprint to version 1.5.3 using the internal update mechanism ...
don't forgot to disable / enable octoprint APKG (the internal restart don't work (A.D.M. is not a standard Linux distribution) after the END of the update
Also if you have an Ender-3 or an Ender3 Pro ... don't forgot to reapply the patch to be able to have access to the SD-Card.
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T
- father.mande
- Posts: 1818
- Joined: Sat Sep 12, 2015 2:55 am
- Location: La Rochelle (France)
[OctoPrint 1.6.1] 3D printer console & management
Hi,
For your information ... new version available (1.6.1) in new environment (Ubuntu 20.04 L.T.S and Python 3 (3.8) and for A.D.M. 3.x AND 4.x
information here : viewtopic.php?f=42&t=12124
Philippe.
For your information ... new version available (1.6.1) in new environment (Ubuntu 20.04 L.T.S and Python 3 (3.8) and for A.D.M. 3.x AND 4.x
information here : viewtopic.php?f=42&t=12124
Philippe.
AS6602T / AS5202T /AS5002T / AS1002T / FS6706T