Hi
I have recording set to trigger on motion. This works for a while then just seems to stop. Log file extract below shows that motion detection actions still being seen but the event trigger stops working. I have this camera set to record on motion 24x7. It isn't consistent....sometimes seems fine for 24 hours, sometimes stops for a few hours and then starts again.
If you look from 12:21 onwards in the log below it is no longer sating Started Event recording or end of motion event.
I am at a loss to understand this. Any suggestions?
Many thanks
Jonathan
Information 10/04/2017 12:19 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:19 Event recording for camera [LobbyCam] will be started.
Information 10/04/2017 12:19 Started event recording for camera [LobbyCam] successfully.
Information 10/04/2017 12:19 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:19 Event recording for camera [LobbyCam] will be stopped.
Information 10/04/2017 12:19 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:20 Stopped event recording for camera [LobbyCam] successfully.
Information 10/04/2017 12:20 Event recording for camera [LobbyCam] will be started.
Information 10/04/2017 12:20 Started event recording for camera [LobbyCam] successfully.
Information 10/04/2017 12:20 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:20 Event recording for camera [LobbyCam] will be stopped.
Information 10/04/2017 12:20 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:20 Stopped event recording for camera [LobbyCam] successfully.
Information 10/04/2017 12:20 Event recording for camera [LobbyCam] will be started.
Information 10/04/2017 12:20 Started event recording for camera [LobbyCam] successfully.
Information 10/04/2017 12:21 Stopped event recording for camera [LobbyCam] successfully.
Information 10/04/2017 12:21 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:22 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:23 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:24 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:24 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:24 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:25 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:25 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:26 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:30 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:30 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:30 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:31 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:33 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:33 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:33 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:34 End of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:35 Beginning of motion event detected by camera [LobbyCam].
Information 10/04/2017 12:35 End of motion event detected by camera [LobbyCam].
Motion detection in log but event triggers stop
Moderator: Lillian.W@AST
-
- Posts: 11
- youtube meble na wymiar Warszawa
- Joined: Tue Mar 14, 2017 9:18 pm
-
- Posts: 16
- Joined: Thu Aug 04, 2016 2:50 am
Re: Motion detection in log but event triggers stop
Got same issue, have made ticket for support and they're working on fix.
Do you have pre/post-recording enabled ? Turning it off fixed this for me for now.
Do you have pre/post-recording enabled ? Turning it off fixed this for me for now.
-
- Posts: 11
- Joined: Tue Mar 14, 2017 9:18 pm
Re: Motion detection in log but event triggers stop
Thanks chmooreck....can you post a link for where you raise support tickets please
I will try turning off the pre and post event bit!
thanks for the reply
Jonathan
I will try turning off the pre and post event bit!
thanks for the reply
Jonathan
-
- Posts: 16
- Joined: Thu Aug 04, 2016 2:50 am
Re: Motion detection in log but event triggers stop
Ticket: https://support.asustor.com/index.php?/ ... View/15432
Don't know if you'll be able to see it.
Edit:
They found bug causing this behaviour, so it will be (hopefully) fixed in next version.
We should disable pre/post recording for now.
Don't know if you'll be able to see it.
Edit:
They found bug causing this behaviour, so it will be (hopefully) fixed in next version.
We should disable pre/post recording for now.