Motion Detection with MWPower camera

[chmooreck]

Hi,

I've got ONVIF cameras (polish brand MWPower, IP40-2M-MZ-W and IP40-1536P-MZ-W-SD), which I was able to add without problems. Continous recording works fine.

However MD recording doesn't work. LinGoDigit ONVIF Device Tool (http://lingodigit.com/onvif_nvc.html) log shows, that motion events are sended by camera:

IP40-2M-MZ-W:

Code: Select all

Wed Aug  3 18:55:07 2016
: tns1:RuleEngine/CellMotionDetector/MotionSource:
	Window=0
	Source=000
	VideoSourceConfigurationToken=VideoSourceToken
	VideoAnalyticsConfigurationToken=VideoAnalyticsToken
	Rule=MyMotionDetectorRule
Data:
	Motion=1
	State=true
	IsMotion=true
Wed Aug  3 18:55:09 2016
: tns1:RuleEngine/CellMotionDetector/MotionSource:
	Window=0
	Source=000
	VideoSourceConfigurationToken=VideoSourceToken
	VideoAnalyticsConfigurationToken=VideoAnalyticsToken
	Rule=MyMotionDetectorRule
Data:
	Motion=0
	State=false
	IsMotion=false

IP40-1536P-MZ-W-SD:

Code: Select all

Wed Aug  3 19:12:19 2016
: tns1:RuleEngine/CellMotionDetector/MotionSource:
	Window=0
	Source=000
	VideoSourceConfigurationToken=VideoSourceToken
	VideoAnalyticsConfigurationToken=VideoAnalyticsToken
	Rule=MyMotionDetectorRule
Data:
	Motion=1
	State=true
	IsMotion=true
Wed Aug  3 19:12:22 2016
: tns1:RuleEngine/CellMotionDetector/MotionSource:
	Window=0
	Source=000
	VideoSourceConfigurationToken=VideoSourceToken
	VideoAnalyticsConfigurationToken=VideoAnalyticsToken
	Rule=MyMotionDetectorRule
Data:
	Motion=0
	State=false
	IsMotion=false

Is there anything wrong with these events ?
Can support for them be added to Surveillance Center ?

[James.S@AST]

Hi chmooreck,
We will need you help to run a windows utility to gather the information from IP camera.
Would you please PM me your email address, therefore I can send you the tool and guideline?

Thank you,
JAMES