Arecont Vision 180 CAM with Asustor NAS

[zurk]

This is how to configure a 180 Arecont Camera with your asustor NAS 6xxx series.
Load the surveillance centre - the arecont camera is the only one which can be recorded. The 180 CAM has 4 streams so only 1 camera per asustor nas.
Set each stream to RTSP over TCP default port 554 (NOT http). host - name of the cam on the network. do this 4 times.
path :
h264.sdp1?res=full&x0=0&y0=0&x1=1600&y1=1200&quality=15&doublescan=0&ssn=1&id=1
h264.sdp2?res=full&x0=0&y0=0&x1=1600&y1=1200&quality=15&doublescan=0&ssn=2&id=2
h264.sdp3?res=full&x0=0&y0=0&x1=1600&y1=1200&quality=15&doublescan=0&ssn=3&id=3
h264.sdp4?res=full&x0=0&y0=0&x1=1600&y1=1200&quality=15&doublescan=0&ssn=4&id=4
Mine is an AV8185DN