Hi,
I have a call open to Asustor but I was wondering if anyone had the same problem or a clue of what could be causing the problem.
I have 4 cameras, 3 different models configure with ONVIF that stop recording because it doesn't see the motion detection anymore since the last update.
Continuous recording work fine, it's seem the detection isn't working but in the camera software the detection is fine.
The support gave me the version before to install manually and detection and recording works again.
Now they trying to figure out what's causing this.
Detection and recording stop working after last update
-
- Posts: 16
- youtube meble na wymiar Warszawa
- Joined: Sun Apr 26, 2020 10:55 pm
Detection and recording stop working after last update
AS5304T
4-x 4 tera Iron Wolf
Raid 5
4-x 4 tera Iron Wolf
Raid 5
-
- Posts: 9
- Joined: Fri Nov 07, 2014 6:42 pm
- Location: UK - Manchester
Re: Detection and recording stop working after last update
Yep - sounds like same problem. Continuous recording is fine but nothing from motion recording. Have you had any more news on a solution?
My two cameras are bot set up as generic ONVIF also.
My two cameras are bot set up as generic ONVIF also.
===========================
AS-604T
AS-RCU IR Remote
AS-604T
AS-RCU IR Remote
-
- Posts: 1
- Joined: Sat Feb 27, 2021 5:01 am
Re: Detection and recording stop working after last update
I am having the same issue. Motion detection no longer works, although continous record works fine
does anyone have a fix for this?
If not, can someone direct me where I can get the previous version that was working for motion for my 6404T??
does anyone have a fix for this?
If not, can someone direct me where I can get the previous version that was working for motion for my 6404T??
Andrew Byrd
Andrew Byrd Networks LLC
Asustor 6404T (4) 8TB Seagate NAS drives on Raid 5
Andrew Byrd Networks LLC
Asustor 6404T (4) 8TB Seagate NAS drives on Raid 5
-
- Posts: 4
- Joined: Sun Feb 07, 2021 2:57 am
Re: Detection and recording stop working after last update
Here is a link for AS-61XX from my thread. I cant install it but maybe it works for you
http://support.myasustor.com:18900/port ... m9Jen7FIdg
Here is another Link for AS-31XX:beast69 wrote:I don't know how long it will be available but here's the link the provided me for the version 2.8.0.11996.
http://support.ezconnect.to/portal/apis ... rtg4dkmf4w
So far it's the only way to have motion working again with ONVIF on some camera.
http://support.myasustor.com:18900/port ... m9Jen7FIdg