Is anyone using a Foscam R2C successfully?

Surveillance Center gives you the ability to collectively manage an array of IP cameras. Through its Web-based interface you can monitor live view feeds from all your cameras and play back previously recorded video.

Moderator: Lillian.W@AST

Post Reply
unome
Posts: 31
youtube meble na wymiar Warszawa
Joined: Fri Mar 27, 2015 2:08 am

Is anyone using a Foscam R2C successfully?

Post by unome »

I'm running a AS3102T with the latest version of Surveillance Center. I tried to get the camera connected and it tested okay but no image showed up in the active view. I then removed it and tried to reinstall it but now it won't test correctly.
I have started a ticket and was given a link to 2.7.5 but there is no choice for the R2C under Foscam.
I would just like to know if anyone is having success with this camera.
Thanks.
unome
Posts: 31
Joined: Fri Mar 27, 2015 2:08 am

Re: Is anyone using a Foscam R2C successfully?

Post by unome »

3 months since I asked. I guess no one????

The reason I ask is it is listed as a compatible camera [https://www.asustor.com/service/ipcam?i ... and_id=120 but even with tech support we could not get it working.
So now I have $50 camera I can't use. Maybe someday. Although the request for that info was never answered.
Disappointing.
Fro
Posts: 7
Joined: Wed May 27, 2020 8:26 am

Re: Is anyone using a Foscam R2C successfully?

Post by Fro »

Im using an R4, not what you are using but i thought i would try and give my input anyways.
The R4 took me about 4-5 hours to setup after multiple trial and error. could only get to install on the web version, and had to uninstall the viewer from windows.
upon scan it recognizes it as a ONVIF, and not the Foscam R4, and i couldnt go through with the options, it would say *loading* before it goes to the resolution page.
Have to add it manually, and took me a while as well to log in with username and password. but thats on me, should have read the instructions where admin is user with no pw.
Im having trouble updating the time, and now switching over volumes for storage, a lot of work to put into this to get what i want. no very user friendly
Post Reply

Return to “Surveillance Center”