It is currently Mon Nov 30, 2020 6:53 pm
All times are UTC + 8 hours

Raspberry Pi RTSP Stream

Surveillance Center gives you the ability to collectively manage an array of IP cameras. Through its Web-based interface you can monitor live view feeds from all your cameras and play back previously recorded video.

Raspberry Pi RTSP Stream

Postby Uli » Tue Jul 16, 2019 5:35 am

Hello ASUSTOR Community,

I have problems with adding my Raspberry Pi RTSP video stream to the ASUSTOR Surveillance Center.
Maybe some of you could help me?

My Raspberry Pi is transmitting the Pi-Cam Live Video stream into the home WiFi.
Any device in my home WiFi which runs VLC (iPad, PC, etc.) can receive the network video stream using address
rtsp://192.168.178.44:8554

But while spending a lot of time, I failed adding this network stream to the ASUSTOR Surveillance Center.
I added a new camera chosing "manual setup", then
brand = User-defined
model = RTP over RTSP (TCP)
IP/Host = 192.168.178.44
Port = 80 <- Here I'm confused, because the official HowTo declares this mandatory field as "Camera's HTTP port (normally 80)"
but: I'm not using http!?
RTSP-Path = ??? <- I left it empty
RTSP-Port = 8554
Username = <- I left it empty
Password = <- I left it empty

Result of this config is: COULD NOT CONNECT TO CAMERA, PLEASE TRY AGAIN...

Does anyone have an idea what's going wrong :?:
I would appreciate!

Best regards
Uli
Uli
 
Posts: 1
Joined: Tue Jul 16, 2019 5:07 am

Return to Surveillance Center

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 3 guests