Can't browse files on NAS from windows

This is where you can find the latest ADM official release. Feel free to discuss any questions regarding it here.

Moderator: Lillian.W@AST

Post Reply
haynsie
Posts: 11
youtube meble na wymiar Warszawa
Joined: Mon Jan 20, 2014 12:42 am

Can't browse files on NAS from windows

Post by haynsie »

I used to be able to browse files on my NAS from windows explorer, but just noticed I no longer can. In fact, it doesn't even appear under the Network icon.

There's LOADS of stuff on the Internet about not being able to see NAS drives from windows (in general, not just ASUSTOR), but I've tried all of the recommended things and nothing helps.

I can't even map a drive / browse files from ASUSTOR control centre - if I select 'connect' I just get an error message that says the IP address is not available. I can access the NAS through the web interface with o problem at all, but just not browse files etc.

Most of the online articles claim say this might be to do with SMB, or enabling netBios in the network adaptor properties. I've done this and it didn't help though.

Any ideas?

Cheers.

Dave.
wde
Posts: 224
Joined: Sun Jun 16, 2013 5:00 pm

Re: Can't browse files on NAS from windows

Post by wde »

After a Windows 10 update a few months back I did the following to get my NAS to show up in File Explorer:

"Turn windows features on or off"
Check that "SMB 1.0/CIFS File Sharing Support" is enabled
Check that "SMB 1.0/CIFS Client" is enabled.

System may want to reboot

Hope this helps.
My NAS: Flashtor 6 FS6706T ADM: 4.2.7.RRD1 Router: Technicolor CGM4331COM (XB7)
Post Reply

Return to “[Official] For AS-60X Series”