Hi
I can't connect via a browser til my AS-602T after I upgraded til the new version af ADM. I tried this with a windows, macbook and Iphone.
It did the upgrade via Aimaster when I was out of town.
I can acces the adm via Aimaster and my mapped drives works as well.
I can connect to Utorrent via browser but not plex.
I don't get it!
Any Ideas?
ADM 3.0.4.RCQ1 problem
-
- Posts: 31
- youtube meble na wymiar Warszawa
- Joined: Wed Dec 18, 2013 5:31 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: ADM 3.0.4.RCQ1 problem
It's possible that you need to upgrade some Apps after upgraded ADM. You can check App Central. Or you can disable Plex, then re-enable it again.
-
- Posts: 31
- Joined: Wed Dec 18, 2013 5:31 am
Re: ADM 3.0.4.RCQ1 problem
I remembered that I also got a new internet provider = new router.
Guess what! I can connect with the old router.... and because I do not have a clue to why it does not work with the new router
Any Ideas?
Guess what! I can connect with the old router.... and because I do not have a clue to why it does not work with the new router
Any Ideas?
-
- Posts: 31
- Joined: Wed Dec 18, 2013 5:31 am
Re: ADM 3.0.4.RCQ1 problem
It works after I removed the ports from this menu
Advanced -- Virtual Servers Setup
Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol and External port) to the Internal server with private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum 60 entries can be configured.
Advanced -- Virtual Servers Setup
Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol and External port) to the Internal server with private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum 60 entries can be configured.