AS 606T
ADM 3.03 RAI4
I am cleaning up, thus
- deleting users
- disabling shares
- deleting volume
- factory reset
- removal of drives
etc...
all in preparation for a brand new setup.
But I am not allowed to delete the volume? If I can't delete the volume and the RAID properly, the disks may return an error stat claiming they are RAW and reporting a larger size (the former RAID size) then they actually are. Been there several times.
It only gives the option to remake the Volume in to another volume of a different, or same, RAID level. And that only if I select Advanced.
What sick logic is this?
I want to delete a volume
-
- Posts: 26
- youtube meble na wymiar Warszawa
- Joined: Thu Oct 24, 2013 12:25 am
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: I want to delete a volume
I'm not quite sure what's your problem. You can delete volumes. As I know, UI notifies warnings (of course, there are special notices and procedure for volume1) when you want to delete a volume.
In your case, you can simply do factory reset "ADM web -> Settings -> Factory reset". Or remove all of your disks from NAS, then reboot your NAS. There should be a initial setup wizard to guide the whole process.
In your case, you can simply do factory reset "ADM web -> Settings -> Factory reset". Or remove all of your disks from NAS, then reboot your NAS. There should be a initial setup wizard to guide the whole process.
-
- Posts: 26
- Joined: Thu Oct 24, 2013 12:25 am
Re: I want to delete a volume
I did a factory reset, but it kept a lot of setting, like IP and admin pwd and other stuff...
I can not just delete a volume, I only get the doalogues to make another kind of volume.
On the Raid controller I have on my server I can delete volumes, there is a delete button. Not so in the NAS. Ah, well, I'll sort it out.
I can not just delete a volume, I only get the doalogues to make another kind of volume.
On the Raid controller I have on my server I can delete volumes, there is a delete button. Not so in the NAS. Ah, well, I'll sort it out.
- orion
- Posts: 3485
- Joined: Wed May 29, 2013 11:09 am
Re: I want to delete a volume
Well, you just pointed out the different requirements on different products. That's why you don't need to setup network and account information on RAID controller. That's your logic problem.