Same issue as mine now... I've just tried to do a software shut down via control center (because I had to perform some forcedmicmac wrote:Hello everybody.
I have a AS-602T and after the upgrade to ADM 2.5.2.RCG2 I can't connect to the nas anymore.
I tried the method with a spare drive. But I can't reach the nas via the network at all. The green led on the nas is keeping blinking all time.
Any suggestion?
hardware restart each time it was shut down or put into sleep mode... but at least after some attempts, it was starting correctly)
after this, now it does not goes online anymore ... green light keeps on blinking...
Just for curiosity, have you tried opening in the web browser the address of the nas as seen in the control center? Should be something like 192.168.0.X
Because I can access that, but it just displays the "No disks detected. You must install at least one disk before you can continue." notification
and it's pretty hard to downgrade or restore if the disks are not detected....
And by the way, could you please also tell me if the NAS it's named correctly in control center?
I am asking because mine has also lost it's name and now the cc shows it as AS000T-D579 with Serial Number AX1108000PL0000 ??????
it seems they have just killed a bunch of 602s