Hi
I have an AS-606T. At the moment I only have two 4TB disk, so I tried to setup Raid0. However, when I do that, and I get to the screen which displays 'Initialize NAS', I get after some time the message: 'Failed to initialize volume'.
Any suggestions how to fix this ?
thnx
Luca
Failed to initialize volume
-
- Posts: 6
- youtube meble na wymiar Warszawa
- Joined: Wed Oct 02, 2013 3:41 am
-
- Posts: 457
- Joined: Wed Jul 03, 2013 9:35 pm
Re: Failed to initialize volume
I think you can ask Asustor support to check it out. I have the fail to initialize one time when I used the WD green label even though all of them are brand new. In the end, one of the hard drive is bad sector in its original state. Not knowing if it is caused by shipping or something. Do not know if you have similar case or not.
-
- Posts: 6
- Joined: Wed Oct 02, 2013 3:41 am
Re: Failed to initialize volume
thnx for the reply. I initially had 3 disk. One of them had issues with the interface (that I could see), and now it turns out that an other has issues too
cheers
cheers