volume inaccessible, how to rebuild after disk replacement?
Posted: Wed Aug 21, 2019 11:51 am
In storage manager volume section, the volume(RAID5) is now in "inaccesible" status, and in overview section it shows "error: system failure". Disk 6 in the volume is shown to be abnormal.
I replaced disk 6 with a blank disk of the same size (not new disk but is working well and filled with zero so should be the same as a new one), however nothing happenned. No RAID rebuild is triggerred. What should I do now?
I replaced disk 6 with a blank disk of the same size (not new disk but is working well and filled with zero so should be the same as a new one), however nothing happenned. No RAID rebuild is triggerred. What should I do now?