It is currently Thu Nov 26, 2020 10:11 am
All times are UTC + 8 hours

volume inaccessible, how to rebuild after disk replacement?

This is where you can find the latest ADM official release. Feel free to discuss any questions regarding it here.

volume inaccessible, how to rebuild after disk replacement?

Postby yoyos » Wed Aug 21, 2019 11:51 am

In storage manager volume section, the volume(RAID5) is now in "inaccesible" status, and in overview section it shows "error: system failure". Disk 6 in the volume is shown to be abnormal.

I replaced disk 6 with a blank disk of the same size (not new disk but is working well and filled with zero so should be the same as a new one), however nothing happenned. No RAID rebuild is triggerred. What should I do now?
yoyos
 
Posts: 2
Joined: Fri May 22, 2015 4:54 am

Re: volume inaccessible, how to rebuild after disk replacement?

Postby orion » Thu Aug 22, 2019 10:11 am

That should mean you got 2 or more disk failures on your RAID5 volume! It's a fatal error.
Are you sure only disk-6 failed? If yes, I'll suggest you to reboot NAS. If your volume is working in a degrade mode, that should be good. You can then replace with the new disk. NAS should re-sync your RAID5 volume automatically.

If it's not the case, I think you need to get helps from asustor support directly.
User avatar
orion
 
Posts: 2783
Joined: Wed May 29, 2013 11:09 am

Return to [Official] For AS-60X Series

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 2 guests

cron