Page 1 of 1

AS3202 and Ironwolf Health Management

PostPosted: Fri Oct 19, 2018 4:36 am
by noebr
Hi guys,

I have a AS3202T with a couple of IronWolf 3TB drives (ST3000VN007) and everything works like a charm.

I really enjoyed some of the features that came with ADM 3.2.1/3.2.2 and I´m aware that my disks do not support Health Management, but would there be any possibility to have a history of the temperature of my disks? :)

Image
Image

I'm planning to replace/upgrade them anytime soon but the disks are still pretty new (about a year of use) and the IronWolf prices of 4TB and above are still high here in Brazil :(

If this is not the best place for this thread please let me know and sorry about the bad English.

Best regards.
Eduardo.

Re: AS3202 and Ironwolf Health Management

PostPosted: Tue Oct 30, 2018 3:03 pm
by Marco@ASUSTOR
noebr wrote:Hi guys,

I have a AS3202T with a couple of IronWolf 3TB drives (ST3000VN007) and everything works like a charm.

I really enjoyed some of the features that came with ADM 3.2.1/3.2.2 and I´m aware that my disks do not support Health Management, but would there be any possibility to have a history of the temperature of my disks? :)

Image
Image

I'm planning to replace/upgrade them anytime soon but the disks are still pretty new (about a year of use) and the IronWolf prices of 4TB and above are still high here in Brazil :(

If this is not the best place for this thread please let me know and sorry about the bad English.

Best regards.
Eduardo.



Unfortunately there is no support for that with other hard drives. Ironwolf Health Management uses proprietary methods not found on other hard drives to report and record temperature and health. Sorry about that. To get those features, you need to use Ironwolf drives. Thanks for your support!