AS-RC13 Remote

Looking for discussion about hardware compatibility? Look no further.

Moderator: Lillian.W@AST

Post Reply
dkobelak
Posts: 101
youtube meble na wymiar Warszawa
Joined: Wed Jun 08, 2016 2:21 am

AS-RC13 Remote

Post by dkobelak »

Just curious if anyone is using this? I see that the older discontinued model required separate IR receiver which has now been discontinued as well.. does this remote come with an IR receiver already?
AS-5104T running stock memory;RAID 5 - 4x3TB Toshiba DT01ACA300;BIOS: v1.21 - ADM: 4.0.4.RQO2
AS-6204T running stock memory;RAID 5 - 3x8TB Seagate Ironwolf ST8000VN0022;BIOS: v2.23 - ADM: 4.0.4.RQO2
dkobelak
Posts: 101
Joined: Wed Jun 08, 2016 2:21 am

Re: AS-RC13 Remote

Post by dkobelak »

Actually I found out that the asustor units I have, do have a built in IR controller.. so this remote should work..
AS-5104T running stock memory;RAID 5 - 4x3TB Toshiba DT01ACA300;BIOS: v1.21 - ADM: 4.0.4.RQO2
AS-6204T running stock memory;RAID 5 - 3x8TB Seagate Ironwolf ST8000VN0022;BIOS: v2.23 - ADM: 4.0.4.RQO2
MikeG.6.5
Posts: 917
Joined: Fri May 15, 2015 1:56 am

Re: AS-RC13 Remote

Post by MikeG.6.5 »

The only ones I'm aware of that don't have the sensors in them are the 20XT and TE, the 30XT and the 60X series. All of the new ones and the older 700X ones have them built in.
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: AS-RC13 Remote

Post by orion »

My AS-304T is built in the IR-receiver. And I own an older IR controller model which is still working fine. :D
crazynas
Posts: 222
Joined: Mon Feb 16, 2015 10:34 pm

Re: AS-RC13 Remote

Post by crazynas »

Please update ADM version to 3.0 or above. :D
https://shop.asustor.com/index.php?rout ... duct_id=81
MikeG.6.5
Posts: 917
Joined: Fri May 15, 2015 1:56 am

Re: AS-RC13 Remote

Post by MikeG.6.5 »

crazynas wrote:Please update ADM version to 3.0 or above. :D
https://shop.asustor.com/index.php?rout ... duct_id=81
In case you hadn't read the OP's signature already, i will point it out to you:
AS-5104T running stock memory;RAID 5 - 4x3TB Toshiba DT01ACA300;BIOS: v1.21 - ADM: v3.0.0.3.RAI4
AS-6204T running stock memory;RAID 1 - 2x8TB Seagate Ironwolf ST8000VN0022;BIOS: v2.23 - ADM: v3.0.0.3.RAI4
I looked at the video that Asustor has posted in this link a few days back, as well as looked over the documentation on the college. I see a lot of information about Kodi and a few other apps. Nothing about Plex Media Player. Does anyone have the new remote and run PMP from @father.mande in any of the versions he has out now? I might be interested in it if someone has tested it already. Right now I have a 2.4Ghz mini-keyboard/trackpad that I use to run PMP. It works, but seems like a kludge.
Post Reply

Return to “Hardware Compatibility”