change my first hard drive - Storage manager

[BlackDelta]

Hello i have a problem
System AS-608T-DAC0

I change my first hard drive 200Gb (with Instal Data ASUS Software) and change it to 4TB and do a new Instal (initalisiierung) from ASUS Software.
Now i cant finde my Volume 2 i had bevor!

Has everybody a idea where i can fix my situation?

--Last Example situation--
subject1 (200Gb) Volum1 [Instal Data System NAS]
subject2 (2TB Raid) Volum2 (Save Data Picturs)
subject3 (2TB Raid) Volum2 (Save Data Picturs)
subject4
subject5
subject6
subject7 (4TB) MyArchiv 1
subject8


New Situation
subject1 (4TB) Volum1 [Instal Data System NAS]
subject2 (2TB Raid) (Save Data Musik) <---- i cant find it!!!
subject3 (2TB Raid) (Save Data Musik2) <---- i cant find it!!!
subject4
subject5
subject6
subject7 (4TB) MyArchiv 1 <---- find it!!!
subject8

NAS.png (49.38 KiB) Viewed 5047 times

[orion]

What's your ADM version? And how do you change your volume-1 (200GB -> 4TB)? Did you do the following?

• Remove disk-200GB from NAS when NAS is working.
• Put your new disk-4TB into NAS.
• Remove volume-1 from ADM web -> Storage Manager -> Volume 1 -> Remove.
• ADM should guide you to re-create volume-1.

If you did the steps above, that should work fine. However you'll need to re-install all of your applications from App Central.

[BlackDelta]

Hello orion,

ADM Version is 2.2.2.RBB1

i shout down my NAS and remove the disc
i put the NAS on and do the initialisation with the new 4TB Disc

about the initialisation i think the NAS Lost my "Volume 1 (200Gb)" and has now a new (Volume 1 (4TB))
The new Volume 1 cant finde my Volume 2

[orion]

Oops, your ADM version is very old. You should upgrade it to the latest one.

Sounds bad. You did the re-installation process. That means NAS cannot recognize your old volume information (volume-2). I think I can only recommend you to send a support request to asustor (http://support.asustor.com/) to recover your volume-2 data.

• Ask support guy to upgrade ADM firmware to the latest one. (it's somehow tricky to upgrade firmware if your ADM version is very old.)
• You should ask support guy to mount your old volume-2 manually.
• Copy the mounted volume-2 data to your "MyArchive 1".
• Un-mount it.
• Setup new volume-2 with your HDD-2 and HDD-3.
• Copy data back to new volume-2.