Hello,
I have 2 HD RED WESTERN DIGITAL WD30EFRX 3To.
One of them is not seen by ADM, but HD light is green.
Any help for me?
JS
WD RED not recognised
Moderator: Lillian.W@AST
-
- Posts: 3
- youtube meble na wymiar Warszawa
- Joined: Thu Feb 12, 2015 3:34 am
- orion
- Posts: 3482
- Joined: Wed May 29, 2013 11:09 am
Re: WD RED not recognised
What's your NAS model? If you can use "ssh" to login to nas (root user), you can check if your disk is detected or not.
You can remove the "not found disk" and execute the command. Plug this disk again, wait 10 seconds, execute the command again.
Code: Select all
ls -al /dev/sd*
-
- Posts: 6
- Joined: Thu Nov 09, 2017 1:34 am
Re: WD RED not recognised
Same for me on a AS-202TE with two 3 TB WD Red. BIOS is latest, dmesg output is:
[ 111.088580] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 111.095967] ata1: irq_stat 0x00000040, connection status changed
[ 111.101983] ata1: SError: { CommWake DevExch }
[ 111.106435] ata1: hard resetting link
[ 121.135733] ata1: softreset failed (device not ready)
[ 121.140789] ata1: hard resetting link
[ 130.508823] ata1: SATA link down (SStatus 0 SControl 300)
[ 130.508835] ata1: illegal qc_active transition (00000000->00000001)
[ 130.520480] ata1: EH complete
[ 130.696609] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 130.703994] ata1: irq_stat 0x00000040, connection status changed
[ 130.710557] ata1: SError: { CommWake DevExch }
[ 130.715019] ata1: hard resetting link
[ 140.744398] ata1: softreset failed (device not ready)
[ 140.749452] ata1: hard resetting link
[ 150.788072] ata1: softreset failed (device not ready)
[ 150.793124] ata1: hard resetting link
[ 156.172710] ata1: SATA link down (SStatus 0 SControl 300)
[ 156.178158] ata1: EH complete
[ 156.391520] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 156.398910] ata1: irq_stat 0x00000040, connection status changed
[ 156.404911] ata1: SError: { CommWake DevExch }
[ 156.409373] ata1: hard resetting link
[ 157.309279] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 157.315699] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 162.313997] ata1: hard resetting link
[ 162.822896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 162.829317] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 167.827622] ata1: hard resetting link
[ 168.336525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.342947] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 173.341250] ata1: hard resetting link
[ 173.842151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 173.848339] ata1: EH complete
[ 111.088580] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 111.095967] ata1: irq_stat 0x00000040, connection status changed
[ 111.101983] ata1: SError: { CommWake DevExch }
[ 111.106435] ata1: hard resetting link
[ 121.135733] ata1: softreset failed (device not ready)
[ 121.140789] ata1: hard resetting link
[ 130.508823] ata1: SATA link down (SStatus 0 SControl 300)
[ 130.508835] ata1: illegal qc_active transition (00000000->00000001)
[ 130.520480] ata1: EH complete
[ 130.696609] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 130.703994] ata1: irq_stat 0x00000040, connection status changed
[ 130.710557] ata1: SError: { CommWake DevExch }
[ 130.715019] ata1: hard resetting link
[ 140.744398] ata1: softreset failed (device not ready)
[ 140.749452] ata1: hard resetting link
[ 150.788072] ata1: softreset failed (device not ready)
[ 150.793124] ata1: hard resetting link
[ 156.172710] ata1: SATA link down (SStatus 0 SControl 300)
[ 156.178158] ata1: EH complete
[ 156.391520] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 156.398910] ata1: irq_stat 0x00000040, connection status changed
[ 156.404911] ata1: SError: { CommWake DevExch }
[ 156.409373] ata1: hard resetting link
[ 157.309279] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 157.315699] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 162.313997] ata1: hard resetting link
[ 162.822896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 162.829317] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 167.827622] ata1: hard resetting link
[ 168.336525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.342947] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 173.341250] ata1: hard resetting link
[ 173.842151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 173.848339] ata1: EH complete