WD RED not recognised

Looking for discussion about hardware compatibility? Look no further.

Moderator: Lillian.W@AST

Post Reply
boulbar
Posts: 3
youtube meble na wymiar Warszawa
Joined: Thu Feb 12, 2015 3:34 am

WD RED not recognised

Post by boulbar »

Hello,
:roll:
I have 2 HD RED WESTERN DIGITAL WD30EFRX 3To.
One of them is not seen by ADM, but HD light is green.
Any help for me?

JS
User avatar
orion
Posts: 3482
Joined: Wed May 29, 2013 11:09 am

Re: WD RED not recognised

Post by orion »

What's your NAS model? If you can use "ssh" to login to nas (root user), you can check if your disk is detected or not.

Code: Select all

ls -al /dev/sd*
You can remove the "not found disk" and execute the command. Plug this disk again, wait 10 seconds, execute the command again.
Cartof
Posts: 6
Joined: Thu Nov 09, 2017 1:34 am

Re: WD RED not recognised

Post by Cartof »

Same for me on a AS-202TE with two 3 TB WD Red. BIOS is latest, dmesg output is:

[ 111.088580] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 111.095967] ata1: irq_stat 0x00000040, connection status changed
[ 111.101983] ata1: SError: { CommWake DevExch }
[ 111.106435] ata1: hard resetting link
[ 121.135733] ata1: softreset failed (device not ready)
[ 121.140789] ata1: hard resetting link
[ 130.508823] ata1: SATA link down (SStatus 0 SControl 300)
[ 130.508835] ata1: illegal qc_active transition (00000000->00000001)
[ 130.520480] ata1: EH complete
[ 130.696609] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 130.703994] ata1: irq_stat 0x00000040, connection status changed
[ 130.710557] ata1: SError: { CommWake DevExch }
[ 130.715019] ata1: hard resetting link
[ 140.744398] ata1: softreset failed (device not ready)
[ 140.749452] ata1: hard resetting link
[ 150.788072] ata1: softreset failed (device not ready)
[ 150.793124] ata1: hard resetting link
[ 156.172710] ata1: SATA link down (SStatus 0 SControl 300)
[ 156.178158] ata1: EH complete
[ 156.391520] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 156.398910] ata1: irq_stat 0x00000040, connection status changed
[ 156.404911] ata1: SError: { CommWake DevExch }
[ 156.409373] ata1: hard resetting link
[ 157.309279] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 157.315699] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 162.313997] ata1: hard resetting link
[ 162.822896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 162.829317] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 167.827622] ata1: hard resetting link
[ 168.336525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.342947] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 173.341250] ata1: hard resetting link
[ 173.842151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 173.848339] ata1: EH complete
Post Reply

Return to “Hardware Compatibility”