Upgrade RAM

[feejai]

Since upgrade to OS v1.0.6.R1G4, this issue seems to have been fixed.

I've run into what looks like a known problem when upgrading the RAM on these devices. It's not as bad as the OP's post here, but I can confirm that a process called ECD was hogging up 25% to 30% of all the CPU resources and wouldn't let them go. Apparently there is a fix coming for this soon.

I was unable to find any of the 'approved' ram upgrades, so I took a chance on the following:

G.Skill F3-10666CL9S-2GBSQ - http://www.gskill.com/products.php?index=144

It's been running for about a week now without any issues. I will report back if anything unusual starts happening.

[James.W@AST]

Thanks for the feedback : )

[nor3k]

I bought Kingston 2GB Module - DDR3 1333MHz

Part Number: KVR1333D3S8S9/2G

Specs: DDR3, 1333MHz, Non-ECC, CL9, 1.5V, Unbuffered, SODIMM, 204-pin,

Works fine.

[snoopy]

I am using the same 8 chips Kingston Memory Module (KVR1333D3S8S9/2G), works fine on AS-608T

also the 8 chips Samsung M471B5773CHS-CH9 (2GB 1Rx8 PC3-10600S-09-10-ZZZ), works fine on AS-608T

After tested with a bunch of 2GB memory (> 8chips) cannot power on the NAS

[MDPlatts]

I'm using corsair value select ram pc3-1333 2GiB - p/n CMSO2GX3M1A1333C9 - though I'd like to remove the 1GiB stick and upgrade it to 2GiB too - why that wasnt done before for the extra couple of $ it would have cost is beyond me.

[ho66es]

Just upgraded mine with the following (bought on ebay)





worked well

[GHETTOCHiLD]

im using http://www.amazon.com/gp/product/B004QG ... UTF8&psc=1 and it works great!