It is currently Tue Dec 01, 2020 1:43 am
All times are UTC + 8 hours

HDs not found on reboot

Looking for discussion about hardware compatibility? Look no further.

HDs not found on reboot

Postby Tsu » Thu Jul 23, 2020 5:26 am

Hi All,

I'm having issues with my NAS. I have the Asustor Nimbustor 4 (AS5304T)

Each time I reboot the NAS it fails to detect a drive. No drive shows in the ADM, but the light on the NAS is on for that drive.

Each time I reboot I have this problem, it appears to be random as to which drive it will fail to detect. In order to resolve, I need to unplug the drive and plug it back in, then the RAID needs to rebuild.

I have updated to the latest ADM but the issue still occurs. I have tried to update the latest bios but the Gemini Lake Bios Updater doesn't do anything, I'm assuming its the latest version but I can't find any information on it.

Frankly I bought this nas to use the RAID 5 feature in order to back up all my data privately with fault tolerance. When I got it I was very excited. I have to say i'm extremely disappointed that each time I reboot the nas I'm essentially playing Russian roulette with my lifetime of data. To say that I'm underwhelmed would be too generous.

Specs:
Asustor Nimbustor 4 (AS5304T)
16GB Memory
ADM Version: 3.51.R7E4
BIOS Version 1.25
HDs: 4x 8TB ST8000AS0002 (Checked the compatibility list against this NAS and it says it's fine without issues)

Any help would be appreciated.
Tsu
 
Posts: 1
Joined: Thu Jul 23, 2020 5:03 am

Re: HDs not found on reboot

Postby orion » Thu Jul 23, 2020 10:03 am

It indeed sounds hardware issue. To make sure of it, you can get "dmesg" if you know how to use ssh command. Anyway, I'll suggest you to send a support request to asustor. https://support.asustor.com/
User avatar
orion
 
Posts: 2788
Joined: Wed May 29, 2013 11:09 am

Re: HDs not found on reboot

Postby Nazar78 » Fri Jul 24, 2020 4:25 am

Random disk not found seems to be hardware related. Power down the NAS remove all the 4 disks and slightly touch the backplate slots with your finger, do you feel anything loose? Also when you slot in the disks, after the click it's also possible to slightly push the caddy further in, for mine at least. I've once dissembled mine to clean the dust, the backplate is a one piece pcb slot into the main board held by some screws to the chassis.

Any errors in the scan disks or smart? Orion is right you can see more details in the dmesg.
AS5304T - 16GB DDR4 - [40TB N300 RAID10 + 5 Bay USB: 8TB RAID5 & 480GB SSD for Apps]
User avatar
Nazar78
 
Posts: 201
Joined: Wed Jul 17, 2019 10:21 pm
Location: Singapore

Return to Hardware Compatibility

  • You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot post attachments in this forum
  • Who is online

    Users browsing this forum: No registered users and 2 guests